Permission Problems

trying to set up a simple NAS using Raspian on RaspberryPi2.
installed ntfs-3g and samba.
followed various methods to set it up.
found one that allows me access to my drives.
PROBLEM.....

As a test I edited a simple text file using my laptop (windows7), however when trying to save I receive "access denied"
same occurred on our other computers.

My setup....
in fstab

added...
UUID=DBE6-7AC0 /media/Lexar vfat defaults.noatime 0 2
UUID=F21843B31843756F /media/OurFiles ntfs defaults,noatime0 3


in samba config set security = user and encrypt passwords = yes in Authentication Section, then added the following at the end of file:
[Lexar]
comment this is the Lexar (vfat)
path = /media/Lexar
available = yes
read only = no
browsable = yes
public = yes
writable = yes
create mask = 0775

[OurFiles]
comment this is the OurFiles (ntfs)
path = /media/OurFiles
available = yes
read only = no
browsable = yes
public = yes
writable = yes
create mask = 0775

I would be very grateful for any assistance....thank you

Having trouble mastering this environment, please bear with me,


Similar Content



Centos 6.6 And Samba 3 - Can't Get Domain User To Login

Hi All

I have been racking my brains for the past 15 hours or so trying to know why my AD users can't actually login to the share which i have assigned.

This is my smb.conf below:

Quote:
[global]
workgroup = EXAMPLE
security = ads
realm = EXAMPLE.GROUP
domain master = no
local master = no
preferred master = no
printcap name = /etc/printcap
load printers = no
idmap backend = tdb
idmap uid = 10000-99999
idmap gid = 10000-99999
idmap config EXAMPLE:backend = rid
idmap config EXAMPLE:range = 10000-9999
winbind enum users = yes
winbind enum groups = yes
winbind use default domain = yes
winbind nested groups = yes
winbind refresh tickets = yes
winbind offline logon = true
template homedir = /home/%D/%U
template shell = /bin/false
client use spnego = yes
client ntlmv2 auth = yes
encrypt passwords = yes
restrict anonymous = 2
log file = /var/log/samba/samba.log
log level = 2
valid users = any
[Research]
comment = Research
path = /sharing/research
valid users = EXAMPLE\user1
force group = "domain users"
writable = yes
read only = no
force create mode = 0660
create mask = 0777
directory mask = 0777
force directory mode = 0770
access based share enum = yes
hide unreadable = yes
[Admin]
comment = Admin Area
path = /var/www/html/cmsmadesimple
browseable = yes
writable = yes
read only = no
inherit acls = yes
inherit permissions = yes
create mask = 700
directory mask = 700
valid users = user1

When i do wbinfo -u or wbinfo -g i can see the usernames and groups in my AD.

Also when i do : id username it actually gives me the information for that user in my domain.

I have done net ads login -U and joined the domain.

I have set the pam auth modifications and the krb5 and nsswitch.conf files.

So i do not get why i can't have the user i have assigned to that share access it?

I can only imagine i have something wrong in my smb.conf?

Please any helps would be appreciated.

Thanks

Need Help Configuring My Samba Server

Hi guys,

Need help configuring my samba file server, i have 3 folders

[global]
workgroup = WORKGROUP
server string = Samba Server Version %v
map to guest = Bad User

hosts allow = 127. 192.

log file = /var/log/samba/log.%m
max log size = 50

security = share

load printers = no
cups options = raw
printing = bsd
printcap name = /dev/null
disable spoolss = yes

[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
; valid users = MYDOMAIN\%S

;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
; guest ok = no
; writable = no
; printable = yes

[BIP]
path = /home/BIP
writable = yes
browseable = yes
guest ok = yes
guest only = yes
create mode = 0777
directory mode = 0777
share modes = yes

[Surya Kapuas Perkasa]
path = /home/suryakapuasperkasa
writable = yes
browseable = yes
guest ok = yes
guest only = yes
create mode = 0777
directory mode = 0777
share modes = yes

[Misc]
path = /home/Miscelaneous
writable = yes
browseable = yes
guest ok = yes
guest only = yes
create mode = 0777
directory mode = 0777
share modes = yes
read only = no

The BIP and Surya Kapuas Perkasa can be accessed by windows users, but the Misc, cannot, can somebody help me with solution pls, thanks

Problem With NFS Sharing Between Two Raspberry Pis

I have two raspberrys, one running OSMC and another running raspbian. The first one has two 1TB hard drives plugged in through a powered usb hub. I want to access to the osmc hard drives from the one running raspbian. They are both in the same local network, the osmc one has the ip 192.168.1.24 and the raspbian one has 192.168.1.28. Both are static ips.

These are the hard drives::
Code:
osmc@osmc:~$ ls /media/ -la
total 36
drwxr-xr-x  4 root root  4096 Mar 31 18:28 .
drwxr-xr-x 23 root root  4096 Mar 15 13:35 ..
drwx------  1 osmc osmc  8192 Mar 30 21:54 ELEMENTS
-rw-r--r--  1 root root   232 Mar  6 13:34 README
drwx------  1 osmc osmc 16384 Mar 30 15:22 TOURO

ELEMENTS and TOURO, two ntfs hard drives that work just fine.

I tried sharing the first one through nfs with the following config (i copied the parameters from a tutorial):
Code:
osmc@osmc:~$ cat /etc/exports
# /etc/exports: the access control list for filesystems which may be exported
#               to NFS clients.  See exports(5).
#
# Example for NFSv2 and NFSv3:
# /srv/homes       hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check)
#
# Example for NFSv4:
# /srv/nfs4        gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check)
# /srv/nfs4/homes  gss/krb5i(rw,sync,no_subtree_check)
#
/media/ELEMENTS/Pelis/ 192.168.1.0/24(rw,subtree_check,insecure,no_root_squash)
/media/TOURO/Series/ 192.168.1.0/24(rw,subtree_check,insecure,no_root_squash)

and from the pi running raspbian I have confirmed that I can see the drives being shared:
Code:
 /media $ showmount -e 192.168.1.24
Export list for 192.168.1.24:
/media/TOURO/Series/   192.168.1.0/24
/media/ELEMENTS/Pelis/ 192.168.1.0/24

Now, when I try to mount them, all works fine, but when I ls the folders nothing cames back. This is my fstab:
Code:
1cat /etc/fstab
proc            /proc           proc    defaults          0       0
/dev/mmcblk0p1  /boot           vfat    defaults          0       2
/dev/mmcblk0p2  /               ext4    defaults,noatime  0       1
# a swapfile is not a swap partition, so no using swapon|off from here on, use  dphys-swapfile swap[on|off]  for that
UUID=fdff96e6-816c-d001-e05f-96e6816cd001 /media/hdd/ auto defaults,user 0 0 #external hdd

192.168.1.24:/media/ELEMENTS/Pelis /media/pelis nfs rsize=8192,wsize=8192,timeo=14,intr
192.168.1.24:/media/TOURO/Series /media/series nfs rsize=8192,wsize=8192,timeo=14,intr

Code:
apoc@raspbian ~ $ ls /media/pelis/
apoc@raspbian ~ $

The superweird thing is that they are mounted, as they show up if I run "df -h"

Code:
 df -h
S.ficheros                         Tamaņo Usados  Disp Uso% Montado en
rootfs                               7,2G   2,6G  4,4G  37% /
/dev/root                            7,2G   2,6G  4,4G  37% /
devtmpfs                             484M      0  484M   0% /dev
tmpfs                                 98M   380K   98M   1% /run
tmpfs                                5,0M      0  5,0M   0% /run/lock
tmpfs                                195M      0  195M   0% /run/shm
/dev/mmcblk0p1                        56M    15M   42M  26% /boot
/dev/sda1                            219G   4,7G  202G   3% /media/hdd
192.168.1.24:/media/ELEMENTS/Pelis   932G   742G  191G  80% /media/pelis
192.168.1.24:/media/TOURO/Series     932G   813G  120G  88% /media/series

Code:
ls /media/ -la
total 808
drwxr-xr-x  5 root root   4096 abr  2 18:36 .
drwxr-xr-x 22 root root   4096 mar 25 16:14 ..
drwxr-xr-x  5 apoc apoc   4096 abr  2 13:12 hdd
drwx------  1 apoc pi   786432 mar 30 22:03 pelis
drwx------  1 apoc pi    28672 mar 29 16:09 series

Note that the group for the two folders is "pi", but if I umount the drives it becomes "apoc" (my nick and my personal group).
Code:
ls /media/ -la
total 20
drwxr-xr-x  5 root root 4096 abr  2 18:36 .
drwxr-xr-x 22 root root 4096 mar 25 16:14 ..
drwxr-xr-x  5 apoc apoc 4096 abr  2 13:12 hdd
drwxr-xr-x  2 apoc apoc 4096 abr  2 18:36 pelis
drwxr-xr-x  2 apoc apoc 4096 abr  2 18:36 series

Both users ("osmc" in the osmc pi and "apoc" in the raspbian one) have the same uid: 1000.

What am i doing wrong?

Linux File Server

Hello Everyone
I have installed Ubuntu Server on a 500 GB drive formatted as EXT4.

Of of my Media, movies, music and pictures are from Windows PC's formatted in NTFS.
As all of the computers connecting to the server will be windows based will NTFS be fine or will I have to reformat them to work. The two media drives are 2 x 2GB Sata drives.
Could you tell me if this setup would work or will I have to reformat and and transfer the files to a new filesystem.
Also as a file server whats the best linux file system to use so it will work with windows PC's in a lan flawlessly.
Thanks for you expertise.
Regards

Press S To Skip Mounting Or M For Manual Recovery

error occured while mounting /media/sdb1.
Press S to skip mounting or M for manual recovery.

this comes up every time i boot.

and after cat/etc/fstab this comes up:

/dev/sdb1 /media/sdb1 vfat uid=users,users 0 0
/dev/sdb2 /media/sdb2 hfsplus defaults 0 0
/dev/sdb1 /media/sdb1 ext4 defaults 0 0

remnants from usb sticks and an external HD that are no connected.

tried to remove the mountpoints with sudo rmdir /media/sdb1, but no help.
I am newbie and I mean NEWbie. Can someone head me in the right direction?

Samba Configuration Not Letting Me Access Files?

Hey guys, I got samba working and I am able to access my files, however I am now trying to learn security with it. i am pretty much trying to allow certain groups access certain files. if you look at samba group you can see that I have @sambausers group to access sambagroup directory.

I have a user called sambatest01. the user can access "samba users only" but the user can access all of the other files as well. what is a correct set up on the other smb.conf to prevent users from accessing this? I cant seem to find a proper set up


[drivers]
path = /files/drivers
browseable = yes
read only = no
guest ok = no
guest only = no


[samba users only]
path = /files/sambagroup
browseable = yes
read only = no
guest ok = no
guest only = no
write list = @sambausers
valid users = @sambausers

Samba-Apache-Webdav Permission Problem With User Www-data

I'm not sure if this should be in the newbie section, but I am somewhat of a newbie, so here goes:

In a home network, I have an Xubuntu file server with a Samba share that has me as the owner and authorizes me to access the share.

On another computer, I have Mint running and providing various services, including webdav on Apache with SSL. In the var/www/webdav directory of the Mint computer, I have the Xubuntu Samba share mounted. This is supposed to allow me to access the Samba share from the public internet.

Everything works fine except for one big problem: Apache requires the owner of the webdav directory to be user "www-data," and I can't figure out how to give www-data access to the Samba share, since www-data is not a user on the Xubuntu computer, and moreover I don't know the password for user www-data.

Can anyone figure out how to get around this problem? In particular, is there a way to configure the Samba share on the Xubuntu computer so that user www-data on the Mint computer can have access to it?

(Incidentally, I have my reasons for using two computers, one as a file server and one as a web server. Also, I am thinking about switching to NFS instead of Samba, but I'm not sure if even that would solve my problem.)

Can't Access Samba Share

I have set up a SFTP which I can connect to, go to the right directory and read/write files to.

The full path is home/sftpuser/SFTP/Customer
The user "sftpuser" I am connecting with is in the group "ftpusers" which has read/write access.

That works fine.

Here is my sshd_config:
Code:
Match Group ftpusers ChrootDirectory /home/%u/
 ForceCommand internal-sftp
  AllowAgentForwarding no
  AllowTcpForwarding no
  X11Forwarding no

However, I made a samba share of the folder Customer, when I go to the IP adress on a Windows machine "\\10.0.0.1\" I can see the folder Customer, when entering it requests user/pass and afterwards gives an error: you have not the right permissions.

In Webmin:
Customer /home/sftpuser/SFTP/Customer Read/write to everyone

My smb.conf:
Code:
[global]
    syslog = 0
    log file = /var/log/samba/log.%m
    read raw = no
    write raw = no
    passdb backend = tdbsam
    workgroup = DOMAIN
    usershare allow guests = yes
    socket options = TCP_NODELAY
    pam password change = yes
    passwd program = /usr/bin/passwd %u
    unix password sync = yes
    obey pam restrictions = yes
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    server role = standalone server
    server string = %h server (Samba, Ubuntu)
    max log size = 1000
    map to guest = bad user
    panic action = /usr/share/samba/panic-action %d
    dns proxy = no



[Customer]
    force create mode = 755
    browsable = yes
    public = yes
    path = /home/sftpuser/SFTP/Customer
    force directory mode = 755
    writeable = yes
    valid users = @ftpusers
    force group = ftpusers
    write list = @ftpusers

I have been struggling for 3 days and am totally out of ideas.

LS -L for the folder:
Code:
total 4
drwxrwx---+ 2 sftpuser ftpusers 4096 Apr  9 11:35 Customer

Can't Wrap My Head Around It. Permissions

Hello!

I'm setting up my second homeserver and i'm trying a better/safer approach this time.

My last box ran centOS6.5, Plexmediaserver (ntfs mounted drives) ; Samba , znc , ftp & ssh.
Now this machine was perfect still works like a charm. But i want to do things better this time.

So i got an old server HP Proliant ml350 G5 for a buck. I've finally dared to format 3x 2tb drives as Ext4 and have them running in a software RAID 5. (bye bye NTFS)

Now since my parents will also be using this server as backup and fileserver, i need some permissions in my sambashares.

So i've set up a directory at /sambashares and gave Thomas ownership of it.
but now the rest

So what i'm struggling with:

http://i184.photobucket.com/albums/x...ium77/foto.jpg

User Thomas needs to have read/write/execute access to the whole /sambashares dir
(including Patrick & Nane's files)

Patrick needs read/write/execute access to /sambashares/Patrick & /sambashares/"NewItemsHere"
Patrick needs read access in Movies / TvShows
Patrick may not see the data of Thomas or Nane

Nane needs read/write/execute access to /sambashares/Nane & /sambashares/"NewItemsHere"
Nane needs read access in Movies / TvShows
Nane may not see the data of Thomas or Patrick

I already added 2 groups (admins & pheasants)
Thomas is in the admin group.
Nane and Patrick are in Pheasants




Note: If i recall correctly PlexMediaserver needs ownership of the movie files and Tv Shows for it to function correctly.
(not sure about that, might have been a requirement with mounted NTFS drives)

Time is not on my side, i'm at the end of my CCNA certification and my brain is overloaded with routing commands due to exams coming soon! So if anyone could help me on the way with some keystrokes, that would be great.

Cheers!
Thomas

Trouble Mounting Network Drive On Wandboard/Arch

Hi. I've installed Arch Linux on a Wandboard running Logitech Media Server (LMS). LMS needs to read my music files off of a NAS network share. I can't figure out how to mount that network share.

I was told by someone who has a similar NAS to make the following entry in etc/fstab:

//192.168.10.15/media/Music /mnt/netdrive cifs noauto,x-systemd.automount,user=nobody,password="",iocharse t=utf8,noperm,nounix,nobrl 0 0

But when I start LMS and point it to /mnt/netdrive, my media/Music folder isn't shown. Is there a problem with the way I'm trying to mount the network share?

I've tried using "root" and "admin" as username and the admin password of the NAS as password, but still no luck. I've tried mounting the share manually, but I get a "permission denied" error.

Any help would be greatly appreciated.