Ntop

Hi everyone, I am a new member and also new to linux, I encountered a problem, but last week I tried but did not solve
I downloaded iso file linux 1.1.0 on page potassium https://www.kali.org, I installed on my Dell inspiron n4010, it works very well and does not have any errors, but after I update and upgrade all packages, I rebooted the system switches to the command line, I lost a lot of time to return to the graphics, but when booting up the network manager icon not seen, I have set the package network-manager-gnome_0.9.4.1-0ubuntu2_i386.deb network manager icon show but when click on the network manager icon only contained text "network manager is not running."
I also installed Wicd but could not run "could not connect to wicd's D-Bus interface. Check the wicd log for error messages."
wireless driver apparently was set before
root@kali:~# airmon-ng
PHY Interface Driver Chipset

phy0 wlan0 wl Broadcom Corporation BCM4313 802.11b/g/n (rev 01)

please help me!
please guide installed offline, my kali linux no internet connection. can download package from another machine to install.

Hi,


I have a problem when install package libnss-ldap

Code:

Apt-get install libnss-ldapd
Reading of the lists of packages... Fact
Construction of the tree of dependences(outbuildings)
Reading of the information of state... Fact
Certain packages cannot be installed(settled). This can mean that you asked for the impossible, either, if you use the unstable distribution(casting), which certain packages do not still have
Created or did not go out of Incoming.
The following information should help you to solve the situation:

The following packages contain unsatisfied dependences(outbuildings):
Libglib2.0-0: recommend: xdg-user-dirs but will not be installed(settled)
Break-in(Breakage): glib-networking (in 2.33.12) but 2.32.3-1 must be installed(settled)
E: Error, pkgProblem:: Solves generated breaks, what was able to be caused by packages that must be kept(guarded) as is.

It return me this.

Can you help me please


Thanks.

hello all,
during installing a software, it shows the packages which are being installed. Is it possible to not show the packages and instead display the progress bar. And if somebody wants to see the packages which are getting installed, then by pressing a combination of keys for eg Ctrl+A or Alt+F4 etc the installing packages could be seen.

Just installed unbuntu version 4.3.11(1)-release (x86_64-pc-linux-gnu). Wanted to set up another monitor with an usb vga adapter from j5create. Found this post http://how-to.cc/get-a-displaylink-v...h-ubuntu-12-04. Installed apt-get install xserver-xorg-video-displaylink -> got no green screen on reboot. Created X configuration file...nothing. Looked around some websites were telling me to install: sudo apt-get install xserver-xorg got:

The following packages have unmet dependencies:
unity-control-center : Depends: libcheese-gtk23 (>= 3.4.0) but it is not going to be installed
Depends: libcheese7 (>= 3.0.1) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.

First time I am trying Unbuntu getting already a little frustrated

I use Redhat 6.3 , when I install run "yum install vsftpd" , it pops the following error, does it mean the library is not support , I have to update the kernel ? thanks

Code:

Loaded plugins: product-id, security
file:///media/localrepos/Server/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/localrepos/Server/repodata/repomd.xml
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package vsftpd.x86_64 0:2.2.2-11.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=============================================================================================================================
 Package                    Arch                       Version                            Repository                    Size
=============================================================================================================================
Installing:
 vsftpd                     x86_64                     2.2.2-11.el6                       RHEL-6.3                     151 k

Transaction Summary
=============================================================================================================================
Install       1 Package(s)

Total download size: 151 k
Installed size: 331 k
Is this ok [y/N]: 

Error Downloading Packages:
  vsftpd-2.2.2-11.el6.x86_64: failu  ../Packages/vsftpd-2.2.2-11.el6.x86_64.rpm from RHEL-6.3: [Errno 256] No more mirrors to try.
Loaded plugins

Hello All

I am still working out the basics of Linux.
I have a Centos 7 install. I cannot get this RPM to install. It installs fine under Centos 6.

What am I doing wrong? I really need a GUI Find and Replace program!
--skip broken does not work either.

Thanks in advance
Scott

[root@server ~]# yum localinstall regexxer-0.9-1.el5.rf.x86_64.rpm --skip broken
Loaded plugins: fastestmirror
Examining regexxer-0.9-1.el5.rf.x86_64.rpm: regexxer-0.9-1.el5.rf.x86_64
Marking regexxer-0.9-1.el5.rf.x86_64.rpm to be installed
Skipping: broken, filename does not end in .rpm.
Resolving Dependencies
--> Running transaction check
---> Package regexxer.x86_64 0:0.9-1.el5.rf will be installed
--> Processing Dependency: libatkmm-1.6.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
Loading mirror speeds from cached hostfile
* base: mirror.keystealth.org
* epel: mirror.hmc.edu
* extras: mirror.keystealth.org
* rpmforge: mirror.hmc.edu
* updates: mirror.keystealth.org
--> Processing Dependency: libcairomm-1.0.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libgdkmm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libglade-2.0.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libglademm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libgtkmm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpangomm-1.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpcre.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Running transaction check
---> Package atkmm.x86_64 0:2.22.7-3.el7 will be installed
---> Package cairomm.x86_64 0:1.10.0-8.el7 will be installed
---> Package gtkmm24.x86_64 0:2.24.2-8.el7 will be installed
---> Package libglade2.x86_64 0:2.6.4-11.el7 will be installed
---> Package pangomm.x86_64 0:2.34.0-3.el7 will be installed
---> Package regexxer.x86_64 0:0.9-1.el5.rf will be installed
--> Processing Dependency: libglademm-2.4.so.1()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64
--> Processing Dependency: libpcre.so.0()(64bit) for package: regexxer-0.9-1.el5.rf.x86_64

Packages skipped because of dependency problems:
atkmm-2.22.7-3.el7.x86_64 from base
cairomm-1.10.0-8.el7.x86_64 from base
gtkmm24-2.24.2-8.el7.x86_64 from base
libglade2-2.6.4-11.el7.x86_64 from base
pangomm-2.34.0-3.el7.x86_64 from base
regexxer-0.9-1.el5.rf.x86_64 from /regexxer-0.9-1.el5.rf.x86_64

Hi Gurus,
When I run "yum install" for packages, seems it will download packages to /var/cache/yum. As there's limited free space on /, this will make / full very soon. So is there anyway that I can disable packages downloading to /var/cache/yum?

Thanks.

Hey just signed up after lurking for a bit.

I'm using Mint 17.1 and following the advice in this post to solve my missing menu problem which worked fine.

http://www.linuxquestions.org/questi...5/#post4234891

But now after using Code:

mv ~/.config ~/.config.org

my FPS in a steam game went down from 70 to 30.

I did some re-installations in my package manager, but the FPS still sucks.

Quote:
Commit Log for Mon Mar 23 16:15:01 2015


Completely removed the following packages:
nvidia-340
nvidia-settings
xserver-xorg-video-nouveau

Removed the following packages:
xserver-xorg-video-all
Quote:
Commit Log for Mon Mar 23 16:28:01 2015


Installed the following packages:
nvidia-340 (340.76-0ubuntu1~xedgers14.04.1)
nvidia-settings (346.47-0ubuntu1~xedgers14.04.1)
xserver-xorg-video-nouveau (1:1.0.11+git20141030.3fb97d78-0ubuntu0sarvatt~trusty2)
Quote:
Commit Log for Mon Mar 23 16:40:46 2015


Reinstalled the following packages:
steam-launcher (1.0.0.47)
I also re-downloaded the game as well to make sure it set a new configuration file if it needed to.

Don't suppose someone can tell me exactly what to write in order to download and install PMS on Arch? I'm about to throw my computer out of the window.

First I tried:

Code:

sudo pacman -S plex-media-server-plexpass

And it cannot find anyting. I've only managed to find Plex Home Theatre using this method.

Next I tried:

Code:

sudo pacman -U https://downloads.plex.tv/plex-media-server/0.9.11.17.986-269b82b/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm

Which resulted in an error stating:

Code:

error: failed retrieving file 'plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm.sig' from downloads.plex.tv : the requested URL returned error: 404
warning: failed to download https://downloads.plex.tv/plex-media-server/0.9.11.17.986-269b82b/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm.sig
loading packages...
error: '/var/cache/pacman/pkg/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm' : package missing required signature.

I mean, what am I doing wrong? Can someone please tell me exactly what to type in to download and install PMS?

Cheers

Hi
recently I installed elementary freya os
evey thing was ok with installing chrome ,qbittorent,ubuntu extras,vlc
but with virtual box I got this error
Package dependencies cannot be resolved
details

virtualbox-qt: Depends: libgcc1 (>= 1:4.1.1) but 1:4.9.1-0ubuntu1 is to be installed
Depends: libgl1 but it is a virtual package
Depends: libqt4-network (>= 4:4.5.3) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqt4-opengl (>= 4:4.7.2) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqtcore4 (>= 4:4.8.0) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libqtgui4 (>= 4:4.8.0) but 4:4.8.5+git192-g085f851+dfsg-2ubuntu4 is to be installed
Depends: libstdc++6 (>= 4.6) but 4.8.2-19ubuntu1 is to be installed
Depends: virtualbox (= 4.3.10-dfsg-1ubuntu5) but 4.3.10-dfsg-1ubuntu5 is to be installed

I tried apt-get update
apt-get upgrade and dist-upgrade & autoclen
and almost anything there
now even when trying to install any thing else it tells me there is broken packages !!!
it happend first with vlc
but apt-get update & autoclean solve it now it doesn't