No Sound After New Install Ubuntu 14.04

Hello everyone.
The sound isn't working on my debian live usb.
I've installed pavucontrol hoping that this would turn on the sound somehow. But it hasn't.

The program is showing RS880 HDMI audio [Radeon HD 4200] as my output device.
The play back bar moves when I play video on youtube but there is no sound.
On the configuration tab, I've tried all the options under 'built-in audio' - but none of these seem to work.


aplay -l

Code:

 
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

Don't know why there are 3 playback devices...

lspci | grep -i audio

Code:

00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]

Not sure why there appears to be two sound cards...

On a Ubuntu site about a similar problem with the same sound card, they suggest creating /etc/asound.conf and adding code to it http://ubuntuforums.org/showthread.php?t=1647400
However, at this point, I'm a bit lost.
Can someone help please?

I just downloaded zorin. I cannot find the sound control, nor do I hear any sound.

I tried to use the search option on this forum but had trouble finding the thread I was looking for.

Thanks in advance


Update: Ok, i got the volume control to show up on the panel, down next to the clock. Everything is turned all the way up, when i pull up pulse audio i can see the sound meter fluctuating while i play a video, but there is no sound coming out of the speakers.

How do i get sound?

Thanks again

Dear all,

I have recently upgrade my distribution, everything worked fine except for the sound system.

The audio stops working after a while. I lose the sound after several minutes of Skype use or while watching videos in my browser, it just happens....

But not only Skype or video audio stops, all sounds stop as well. I need to reboot the system to get the sound back, and then the same, at certain point all sounds disappear.

I tried many things that I found (reinstall alsa, kill and restart pulseaudio, install pavucontrol) but none of them seems to work.

This is the result of aplay -l

card 0: MID [HDA Intel MID], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0

The weird thing is that the audio meter of the output sound from pavucontrol shows signal. The bar moves when receiving sound but no sound can be listened.

Typing pulseaudio with or without sound gives me:

E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.

I though the second line was telling that something went wrong, but the sound works at the beginning even with that message.

I do not know what else to do. Any help would be more than welcome since I'm really frustrated.

Thank you very much for your help.

hello,
I installed an ATI card into my pc, now the sound is gone. I suppose this is due to the position of that new card which is now "0" (when I start alsamixer, I see the sound default is "HD-Audio Generic" with "Chip: ATI R6xx HDMI". I dont have a screen on the HDMI. I just want to take the "Intel ICH6" with "Chip: Analog Devices AD1981B" as the default card as per previous installation.

What should I do?

cat /proc/asound/cards
Code:

 0 [Generic        ]: HDA-Intel - HD-Audio Generic
                      HD-Audio Generic at 0xf0620000 irq 42
 1 [ICH6           ]: ICH4 - Intel ICH6
                      Intel ICH6 with AD1981B at irq 21

Thanks.

I tried setting my FiiO-Dac as default alsa sound device using changes in my alsa.conf, but after a reboot, alsa always went back to my broken onboard sound. Help would be appreciated.

cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
2 snd_usb_audio
3 snd_usb_audio

cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe600000 irq 16
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe080000 irq 59
2 [Device ]: USB-Audio - USB PnP Sound Device
C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:12.2-2.3, full spe
3 [Audio ]: USB-Audio - DigiHug USB Audio
FiiO DigiHug USB Audio at usb-0000:00:12.2-2.4, full speed

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: Audio [DigiHug USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: Audio [DigiHug USB Audio], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0

lsmod | grep snd
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 65536 1
snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
snd_usb_audio 151552 0
snd_hda_intel 28672 0
snd_usbmidi_lib 28672 1 snd_usb_audio
snd_rawmidi 28672 1 snd_usbmidi_lib
snd_seq_device 16384 1 snd_rawmidi
snd_hda_controller 28672 1 snd_hda_intel
snd_hda_codec 114688 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 90112 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller snd_timer 28672 1 snd_pcm
snd 69632 12 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_h da_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 16384 2 snd,snd_hda_codec
usbcore 200704 11 uas,snd_usb_audio,usb_storage,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xh ci_pci

Hello everyone.
I have just installed debian stable non-free onto my hard drive but the sound isn't working.

I've been to the debian site https://wiki.debian.org/SoundConfiguration and found that 'users' don't automatically have access to audio (for security reasons).
So I did the following command as root (sudo):
Code:

adduser USER_NAME audio

Now when I am 'user', I can get sound.

I also did:
Code:

chgrp cdrom /dev/sr0
adduser USER_ID cdrom

This allows 'user' to get sound from the cdrom.

I then went onto the debian soundfaq https://wiki.debian.org/SoundFAQ

From the 'lspci -v' command, I get these 2 outputs which have the word 'audio' in it:
Code:

01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]
	Subsystem: Giga-byte Technology Device 960f
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at fdefc000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 3
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: snd_hda_intel

00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
	Subsystem: Giga-byte Technology Device a102
	Flags: bus master, slow devsel, latency 32, IRQ 16
	Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: snd_hda_intel

So I have 2 sound cards.

The debian website says: 'If sound does not work for root account as well, then that means that either your sound card is not supported by Debian or it was not configured properly'.

Ok, so the first part of the statement is worrying.
So I went to the debian device driver check page http://kmuto.jp/debian/hcl/ and did 'lspci -n'.
The output can be pasted onto their web page and debian will say if the sound cards are supported.
The web page shows that the sound cards are supported:

Quote:
10024383 Yes Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) snd-hda-intel v2.6.25
10029715 Yes Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4250] radeon v2.6.35-
1002970f Yes Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] snd-hda-intel v2.6.27-
So now I'm guessing that my sound cards are 'not configured properly'. But I've run a Youtube video and then changed the sound cards under alsamixer and I still don't get sound.
Is there is a simple solution to this please? Thank you in advance.

Hello Everyone,

I installed Linux Mint about four days ago, after a few hitches that I was able to figure out on my own, I got everything up and running and am enjoying my experience. There is one problem however, that I haven't been able to fix myself, so now I'm asking for the communities help. Since day 1 I haven't had any sound from Mint. I've tried videos through Firefox, music on Banshee, and system sounds but nothing is working at all. I have spent the better part of the last three days ripping my hair out and jumping from source to source looking for an answer and so far nothing has worked. I have tried a lot of things including forcing ALSA to reload, and even uninstalling and reinstalling ALSA and Pulse all together. Therein lies my next issue, I followed a guide off of the forums to try uninstalling and reinstalling ALSA and Pulse and it seemed all went according to plan, I reveived no errors during the process, but now my little sound icon in the system tray is missing.

Here is the info on my audio device:

Code: Select all
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel bus-ID: 00:14.2
Card-2: Advanced Micro Devices [AMD/ATI] Device 9840 driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic


Any help is greatly appreciated as having no sound, while not vital, is a major inconvenience.

Thank you!

Hi I a running Ubunto 12.04 on a HP PC with an onboard intel analaog sound card

(ALC662) and a HDMI connection into my TV.
I use this PC for Mythtv and Kodi using the sound over HDMI which works a treat in MythTV however I cannot get the sound to work on Kodi, Firefox or any other app which I presume is down to misconfigured ALSA setup, I had this working previously but it stopped and I am not sure why, possible updates.


sudo aplay -L lists;

Home directory /home/tomc not ours.
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi_complete
sysdefault:CARD=Intel
HDA Intel, ALC662 rev1 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct sample mixing device
dmix:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct sample mixing device
dsnoop:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct sample snooping device
dsnoop:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct sample snooping device
hw:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Direct hardware device without any conversions
hw:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Direct hardware device without any conversions
plughw:CARD=Intel,DEV=0
HDA Intel, ALC662 rev1 Analog
Hardware device with all software conversions
plughw:CARD=Intel,DEV=1
HDA Intel, ALC662 rev1 Digital
Hardware device with all software conversions
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
HDMI Audio Output
dmix:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample mixing device
dmix:CARD=NVidia,DEV=7
HDA NVidia, HDMI 0
Direct sample mixing device
dmix:CARD=NVidia,DEV=8
HDA NVidia, HDMI 0
Direct sample mixing device
dmix:CARD=NVidia,DEV=9
HDA NVidia, HDMI 0
Direct sample mixing device
dsnoop:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=7
HDA NVidia, HDMI 0
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=8
HDA NVidia, HDMI 0
Direct sample snooping device
dsnoop:CARD=NVidia,DEV=9
HDA NVidia, HDMI 0
Direct sample snooping device
hw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 0
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 0
Direct hardware device without any conversions
hw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 0
Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=7
HDA NVidia, HDMI 0
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=8
HDA NVidia, HDMI 0
Hardware device with all software conversions
plughw:CARD=NVidia,DEV=9
HDA NVidia, HDMI 0
Hardware device with all software conversions

aplay -D plughw:1,7 /home/tomc/adios.wav will play my sample wav file though the

HDMI.


Heres my /etc/asound.conf


pcm.hdmi_hw {
type hw
card 1 # <--- card number
device 7 # <--- device number
}

pcm.hdmi_complete {
type softvol
slave.pcm hdmi_hw
control.name hdmi_volume
control.card 1
}

pcm.!default hdmi_complete


Any help would be greatly appreciated as I dont fully understand ALSA and its

driving me up the wall :-)

Thanks
TomC

Hi there folks, first post and been using Linux for roughly a week, not an expert but getting the feel for it.

So....my question is: I am in the process of building a studio-rig for music, and previoulsy I used Windows, and managed to get the x64 drivers for my audio card the Delta 1010LT and got it working etc. It came with the control panel as well.

I tried googling for the drivers for Ubuntu Studio (64), but to be honest, like I said being a newbie, I'm not entirely sure I have to download them? Most things I can just request download and install from the terminal in Ubuntu. Does this apply for these drivers or if not does anyone know the location of these drivers?

Much help is appreciated

Hi

I am trying to fade in audio at 39 seconds into the video with existing audio.

It did work, the mp3 file fades in at 39 seconds, however the original audio from the video is silence or removed.

Here is the code I've use.

Code:

ffmpeg -i audio.mp3 -i test.mp4 -c:v copy -strict experimental -shortest -af 'afade=t=in:st=39' test.mp4

How can I fix this? Thanks