I've recently bought The Elder Scrolls Online: Tamriel Unlimited, and I can't get it to work with wine no matter what I do. I've followed this tutorial, which just gives me a white screen when I run the installation exe, I've run the script from POL, which gives me the same white screen when I run the exe, and I've tried running it with just wine, giving me the same result. I've tried using opengl in the "display" tab on play on linux, which does't do anything. I've tried installing some components such as vcrun, doesn't help. I've reinstalled play on linux and wine, didn't do anything. And I've tried installing steam and then installing the elder scrolls online from steam and it doesn't do anything.
"playonlinux.log" from installation script: http://paste.ubuntu.com/11549385/
"playonlinux.log" from this video: http://paste.ubuntu.com/11549531/
When I start up the installation exe it will bring up a window that looks like this (sometimes the text doesn't show up) or bring up a crash dialog that looks like this. Then When I press "go" or the blank button depending on whether or not the text decides to show up, it will bring up a fullscreen white window and then it will shrink down and freeze, not doing anything or showing anything. Sometimes it will bring up a window like this when I press "go", frozen, saying "play on linux is installing your application."
I'm using the latest version of Manjaro, just updated. And I'm using the "video-catalyst" proprietary drivers. Note that I did get it working with my laptop by just running "wine Install_ESO.exe" and it worked fine. The only difference is the hardware and the drivers, both are running manjaro. Does it only work with open-source drivers?
If any of you have any help, I'd appreciate it. If there is any log files you need I can provide them.
hello all at linuxquestions
first off would just like to say how useful this resource is, Ive been setting up a VM server in lubuntu recently and this site has given me alot of help and helped me get it off the ground. Im certainly a linux noob and only been messing around in linux for a week, so please forgive me for any derpy terminology
anyway, I installed lubuntu onto a VM as an intention to use it as a server
to be honest it was an ISO I had lying around and due to it being "light" I just went for it
however I have since discovered ubuntu do a flavour known as "ubuntu server"
first off..
what is the difference between ubuntu server and regular ubuntu/lubuntu etc?
is it just that it does not load a full fat gui?
if there is a big diffrence would it be easy to "turn" lubuntu into ubuntu server? since they are sort of based off each other?
secondly, lubuntu loads up lxde upon boot, I was wondering if there was a way for it to just boot up without the gui with the option to turn it on via shell (startx etc)
this is because I have little ram to play with but I also like to use the GUI sometimes when needing to do certain admin stuff, for example I use steam via Wine to download steam games sometimes
I was pondering the idea of installing ubuntu server and then downloading the lxde desktop and going that route, but Im not sure if it would bring any benefit opposed to just modifiying my current lubuntu installation
any advise or tips would be welcome
thanks!
Hi everyone.
Earlier I posted a reply on a thread about a problem with partitions while installing Elementary OS Freya as dual-boot, and yancek answered giving me a link with a tutorial (thank you!).
However, after I continue with the installation it stopped with an error saying that grub wasn't installed, something like that. But when I start my computer (with USB boot priority), pops a window with the option to 'Try Elementary..." and "Install Elementary..." and if I press Esc a grub console appears. Doesn't that mean grub is installed? What should I do to fix this?
Best regards,
a Linux amateur
I use following shell script to send email. But the subject of email always shows "This" instead of "This is L_1.R is finished". You may refer http://www.linuxquestions.org/questions/linux-newbie-8/how-to-define-variable-in-%60ssh%60-4175540566/
Code:
host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_2" "L_3" "L_4")
subject="The job is finished"
ssh -f c15-0330-01.ad.mtu.edu 'echo' "the job ${program[0]} is finished" '|' 'mutt "zwang10@mtu.edu" -s' "This is "${program[0]}".R is finished";
Hello, y'all with vast Linux knowledge, I've built my own gaming desktop, here are the specs:
1-MOBO Asus M5A78L-M LX Plus
2-AMD Radeon Graphics R9 270, 2GB DDR5 Memory
3-2 Hyper X Memory Cards totalling 16 Gb of RAM
Have installed and runninbg Zorin 9.0 Ultimate (Ubuntu 14.4) - MY PROBLEM, I am unable to downlolad any games especially "Minecraft", "League of Legends" and a host of other games on "Steam". I have Wine Geko (32 bit) 2.1 version installed and have Winetricks as well, when I open it I can install a host of games, however, nothing is installed. This is the last straw for me, I have no clue what to do do being a Newbie and unfortunately the folks at "Zoringroup/helpdesk" have been absolutely useless as well. Thanks.
What I did in windows was create images of my drive and restore them.
in linux I am running
Code:
rsync -aAXv --exclude={"/home/*","/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} /* /path/to/backup/folder
and this creates a folder for me with all my files, and apparently saves meta data like permissions and paths...
Since I'm using arch and things break sometimes,I'm booted into a CLI with errors and cannot figure my way out since I'm a noob... would I be able to just delete my entire root and replace it with the rsync backup without a problem?
If I'm loading down the system, i.e., running transmission while playing a video, periodically network throughput drops, video stops, cpu activity jumps up, then after a few seconds to a minute suddenly cpu activity goes back to normal, networking and video resumes. In addition I have this "important" message in the log viewer:
Quote:
systemd-udevd
Error calling EVIOCSKEYCODE on device node '/dev/input/event2' (scan code 0xc0183, key code 226): Invalid argument
There are several lines with varying scan and key codes, the rest being the same.
In addition, a couple weeks ago, I had locked myself out of the system, (boot to black screen), due to a failed attempt at installing the latest AMD/ATI proprietary drivers. Thanks to the help of several people on the forum, I was able to get back in, using the native drivers.
Obviously as a newbie to Linux I don't know if any of these things are related.
I would appreciate any help anyone could give me, TIA!!
i need a bash script to switch to zero second on ac the waiting time for turning off the monitor (highlighten in red). same as for on battery (highlighten in purple)
Code:
<?xml version="1.0" encoding="UTF-8"?>
<channel name="xfce4-power-manager" version="1.0">
<property name="xfce4-power-manager" type="empty">
<property name="power-button-action" type="empty"/>
<property name="show-tray-icon" type="empty"/>
<property name="logind-handle-lid-switch" type="bool" value="true"/>
<property name="dpms-on-ac-sleep" type="uint" value="1"/>
<property name="dpms-on-ac-off" type="uint" value="2"/>
<property name="brightness-on-battery" type="uint" value="9"/>
<property name="dpms-on-battery-sleep" type="uint" value="1"/>
<property name="dpms-on-battery-off" type="uint" value="2"/>
<property name="lock-screen-suspend-hibernate" type="bool" value="false"/>
<property name="dpms-enabled" type="bool" value="true"/>
</property>
</channel>
Hello, I hope someone can assist. I have installed 17 on 2 laptops and 17.1 on another all with windows 8 upgraded to 8.1 Now I have a new PC with 8.1 and cannot get 17.1 to install. I go thru all the steps but when I get past "something else" and choose the "free space" that I partitioned in windows and hit install the window pops up with "no root file system is defined" "Please correct from partitioning menu.. I have never had this happen, did I not do something? There is 1 300mb(fat32, efi) partition, ntfa, free space(which is where I am trying to install Linux), 1 small and 1 large "free space". Then the define for boot loader installation, which I do not remember needing to do before. Can someone please help. The PC is an Acer Aspire, amd10, 3.7ghz, quad core, radeon hd 8670 graphics , 1 terabyte hdd, 4gb ram, windows 8.1
Hi
I have just started to use Linux on my Raspberry Pi to host a home automation server & I'm having a problem when trying to run a bash script.
The script in question is to turn off my Viera TV & is as follows
Code:
#!/bin/sh
curl -i \
-H "Accept: text/xml" \
-H "Cache-Control: no-cache" \
-H "Pragma: no-cache" \
-H 'SOAPACTION: "urn:panasonic-com:service:p00NetworkControl:1#X_SendKey"' \
-H "Content-Length: 200" \
-H 'Content-Type: text/xml;charset="utf-8"' \
-X POST --data '<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> \
<s:Body> \
<u:X_SendKey xmlns:u="urn:panasonic-com:service:p00NetworkControl:1"> \
<X_KeyEvent>NRC_POWER-ONOFF</X_KeyEvent> \
</u:X_SendKey> \
</s:Body> \
</s:Envelope>' http://192.168.1.87:55000/nrc/control_0/
If I run this from the command line it works fine but when I try to run it from within the Home Automation application it returns error code 32512 which I've seen elsewhere is actually exit status 127 & basically down to not being able to find the program to execute.
Permissions are fine & I've tried using the full path name for both curl and the script itself but I still get the error. Has anyone any idea what I need to change as this looks to be a pure Linux (or rather my misunderstanding of Linux) issue rather than the home automation program
Thanks
Steve
Hi!
Here is mine configuration and I want make it show unicode(russian) in console, it works perfect in X11 but not when I logging into tty.
vconsole.conf
Code:
LOCALE="en_US.UTF-8"
KEYMAP="sv-latin1"
FONT_UNIMAP="lat1"
FONT_MAP="ISO8859-1"
CONSOLEFONT="ruscii_8x8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Stockholm"
USECOLOR="yes"