RH 5 Cluster Fence Problem On Vitual Box

Hy All,

I have two nodes running RHEL 6.4 which are in cluster. I have clustered httpd service. Now I have certain application suppose X which reside in SAN partition. Now my job is to only automate this script to run by analyzing httpd status. I have successfully created the script apptrigger.sh whose content is given below,

-bash-4.1$ cat apptrigger.sh
a=0
b=0
c=0
d=0
a="service httpd status"
b=`eval $a`
##### CHECKING WHETHER HTTPD SERVICE IS RUNNING OR NOT #####
if [ "$b" != "httpd is stopped" ]; then
c="bash /switchapp/switch/ezlinkenterprise/bin/ezlink-cluster.sh status"
d=`eval $c`
##### CHECKING WHETHER EZ IS RUNNING OR NOT #####
if [ "$d" != "EzTaskMgr is Running" ]; then
ezstart
fi
fi

I have created this script in say test user. Now when I put this script to automate or run every minute through test user and defined its value in crontab -e of test user whose content is as shown below
$crontab -l
* * * * * /bin/bash /home/test/apptrigger.sh

but this script is running as root user so I cannot get the o/p
I think some environment variable need to be set. Anyone can guide me with this step? Thanks for your views and suggestion.

Hi Guys,
i have this Code:

uid=0(root) gid=0(root)

i would like to have the word "root" only from the first field, and later from the second field

i use the command
Code:

[root@v1-6 ~]# cat test-uid |cut -d"(" -f1
brms2
uid=0

[root@v1-6 ~]# cat test-uid |cut -d")" -f1
brms2
uid=0(root

it cut the word after the -d, how can i make it to cut the word BEFORE the -d

expected should be:
cut -d"(" -f1
root)

then i can proceed to eliminate the ) later on.
hope this is not confusing you guys

Thanks,

Hi all,

I am trying to write a script that syncs files from source to destination. I have one centralized server that can ssh to any servers without pw. Now when I run the script, it can ssh to source server perfectly fine, but you need to enter password for destination server. Was wondering how I can clean this up before I start using case statements

Below is a sample I wrote

#!/bin/bash

#This scripts syncs shit

echo "Type in ID: "
read ID

echo "Type in Server : " #source server
read S

echo "Type in Destination Server: "
read DS

if [ $S == 9 ]; then
ssh -t "root@"$S"webserver1" "rsync -av /home/rlui/"$ID "root@"$DS"webserver2:/home/rlui/";
ssh -t "root@"$S"webserver1" "rsync -av /home/rlui/tmp/"$ID "root@sl"$DS"webserver2:/home/rlui/tmp/"
exit 1

where S and DS are cluster numbers

I apologize in advance if I am not clear on anything

Hi,
I'm new to Linux and I need to run a program in Gauss on a cluster.
I want to run it in the background as it is a very big job. I've tried commands like gauss -nodesktop or gauss -nodisplay or both or gauss -b but whatever I do I get the following message:"Failed to get the primary output on the screen" and Gauss application opens. Does anyone know what it means and what is the solution?

What I did in windows was create images of my drive and restore them.

in linux I am running

Code:

rsync -aAXv --exclude={"/home/*","/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} /* /path/to/backup/folder

and this creates a folder for me with all my files, and apparently saves meta data like permissions and paths...

Since I'm using arch and things break sometimes,I'm booted into a CLI with errors and cannot figure my way out since I'm a noob... would I be able to just delete my entire root and replace it with the rsync backup without a problem?

Hi!

Here is mine configuration and I want make it show unicode(russian) in console, it works perfect in X11 but not when I logging into tty.

vconsole.conf
Code:

LOCALE="en_US.UTF-8"
KEYMAP="sv-latin1"
FONT_UNIMAP="lat1"
FONT_MAP="ISO8859-1"
CONSOLEFONT="ruscii_8x8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Stockholm"
USECOLOR="yes"

Code:

PREFIX=192.168.1
OCTET=1
while [ $OCTET -lt "255" ]; do
    echo -en "Pinging ${PREFIX}.${OCTET}..."
    ping -c1 -w1 ${PREFIX}.${OCTET} > /dev/null 2>&1
    if [ "$?" -eq "0" ]; then
       echo "OK"
    else
       echo "Failed"
    fi
    let OCTET=$OCTET+1
done

My question is, in the penultimate line, why is it OCTET, and not $OCTET, with a dollar before it, meaning, the variable?

What if it were written:
Code:

let $OCTET=$OCTET+1

Like in C++ (I think) or Python or whatever?

I use following shell script to send email. But the subject of email always shows "This" instead of "This is L_1.R is finished". You may refer http://www.linuxquestions.org/questions/linux-newbie-8/how-to-define-variable-in-%60ssh%60-4175540566/
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_2" "L_3" "L_4")
subject="The job is finished"
ssh -f c15-0330-01.ad.mtu.edu 'echo' "the job ${program[0]} is finished" '|' 'mutt "zwang10@mtu.edu" -s' "This is "${program[0]}".R is finished";

hi all

I am learning systemd and how to add new services as part of the LFS201 course and I have a question about the services:
Code:

Lab 4.2: Adding a New Startup Service with systemd
For example a very minimal file named
/etc/systemd/system/fake2.service:
[Unit]
Description=fake2
After=network.target
[Service]
ExecStart=/bin/echo I am starting the fake2 service
ExecStop=/bin/echo I am stopping the fake2 service
[Install]
WantedBy=multi-user.target

Code:

root@ubuntu:/etc/systemd/system# systemctl start fake.service
root@ubuntu:/etc/systemd/system# systemctl status fake.service
 fake.service - fake
   Loaded: loaded (/etc/systemd/system/fake.service; disabled; vendor preset: enabled)
   Active: inactive (dead)

May 16 11:41:05 ubuntu systemd[1]: Started fake.
May 16 11:41:05 ubuntu systemd[1]: Starting fake...
May 16 11:41:05 ubuntu echo[1798]: I am starting the fake2 service
May 16 11:41:05 ubuntu echo[1800]: I am stopping the fake2 service
root@ubuntu:/etc/systemd/system# ps aux | grep fake*
root      1809  0.0  0.0  13688  2272 pts/8    S+   11:41   0:00 grep --color=auto fake.service
root@ubuntu:/etc/systemd/system#

as you can see the fake2 service is really only two lines. And when I grep for the service via ps I can't fine it. I guess it is because it has finished running. I am wondering how can I change it so that I can keep it running?

thanks

System Info:

I have normal user in CentOS 7 whose name is "mostafa" (the name of the account).

I naturally have another user called root with all privileges. User "mostafa" is put into sudoers file, too.

The OS is installed in VmWare, so the system is all mine.

Problem:

Now I create a file with touch file.sh and put a command in it, but when I want to run it with Code:

sudo ./file.sh

, an error is shown that the command Code:

./file.sh

does not exist. But if I Code:

 sudo chmod 777 ./file.sh

then it gets run. My question is that, why should I use Code:

chmod 777

when I myself have created the file, and I am in sudoers.

Can anyone explain me why shuold I still use Code:

sudo chmod 777

when the creator of the file is me.