Opening Terminals In X-windows And More

Chapter 17 of gnuplot pdf manual (Mouse Input) says "The x11, pm, windows, ggi, and wxt terminals allow interaction with the current plot using the mouse." I wonder if my Ubuntu 13.04 has any of those, if not, then perhaps the three terminals (Terminal, UXTerm, Xterm) I can invoke here, maybe they also have the same property? The proper term is: are they mouse capable? Thanks, - A.

Hi all,

Very basic question I'm afraid! I installed Linux (with difficulty) as it turned out that I had a duff copy of Windows on my 2nd hand laptop! I'm not as computer-literate as I used to be in the days of DOS and early Windows, nor am I as patient - it all seems to be so complicated now!

I cannot find out how to open a window that's minimised to the task bar. In windows it would just be a click, which as so much of the user interface is similar I'm mystified! It'll turn out to be something incredibly simple, please!

I can do it the long way with alt+tab and scroll through but surely there's a faster way?

How do applets in the panel on the right also get opened as alt tab doesn't work on them!

Any guidance would be SO much appreciated as I've faffed with this for weeks!!

Thank you.

Hi, please excuse any misunderstanding about the title.

I'm an experienced computer user, but not with Linux. As a matter of fact, even with Windows, I only do so much at the command prompt.

I am looking for a very fast (boot and etc.) Linux system, that has nothing more than a command prompt. No X-Windows. However, I would like to configure X-Windows immediately after an installation.

I noticed the LFS project. Very cool, but way too complex for me. It is exactly what I'm looking for, except, I would like the basic system to already be proven, maybe even with security updates.

The biggest most important thing is (ONLY WHAT I WANT). I don't want dozens of browsers, a hundred text editors, or any other cool or stupid open source or commercial software. I simply am looking for what Dos 6.22 was in Linux.

There are many distros. Can you guys help me pick one out that is light, secure and ready to be configured to run X windows or X-Free or Xorg, I'm not sure what the best is right now.

PS: I'm a linux noob, but I have had several decent installations of Ubuntu, and some experience with the command line, including compiling software, but still a beginner.

Good day everyone,

I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)

Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:

A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"

There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.

I just want to make sure what option to choose, I cant afford to lose all my data and windows.

Problem: Showing Kali Linux as current OS and not Windows 8.

Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.

Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.

Thanks for the time reading and helping!

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

i have a few score of files (>50) in fasta format. these work fine in linux os
but i have to send these to a collegue who uses windows. and these files don't open properly in notepad or wordpad. executing save as to windows format does the trick

but i don't want to manually convert all of them

is ther a way i can accomplish conversion of multiple files and saving them in a format of my choosing using say terminal

Hi,
I am very new to linux, and frankly I do not know a whole lot about computers in general, as I'm entirely self taught, and that was all on windows. I really like the idea and concept of linux and ubuntu, and am in the process of learning. I have recently installed Ubuntu 8.04 LTS on an ex Vista computer at work (upon the urging by the boss). I can give more information on the system if needed. However, I think the problem may not be with the system. This is what I got. I installed the o/s and started downloading the updates from the list. As I tried to install Samba and Wine, all of a sudden things started to become complicated. As I'm doing this at work, and everyone is excited to 'play' with this new o/s, someone tried to download limewire as well, when I was away. I didn't see the error messages at that point, but they apparently had some message about java, and tried to shut everything down. Now when I came back, I get this message:

E: dpkg was interrupted you must manually run 'dpkg -- configure - a' to correct.
Problem E: _cache->open()failed

So, not knowing much about linux and even less about using the terminal, I did open the terminal, and typed in: dpkg--configure-a and hit enter. Then it tells me that that command is not found.

I have followed some other posts that deal with this problem, however, all the remedies that worked for them did not work for me. I could use some help, please. My other option is to just reinstall the o/s all over and start new. Thank you.

I have downloaded the JMRI/Decoder Pro package. When I go to open Decoder Pro I get the screen which asks, Run in Terminal, Display, ,?, and Run. If I select Run I get no response, If I select Run in Terminal The Terminal screen flashes for only a second and dissapears.

I have not been able to get an Icon to launch the program from my desktop.

I am usung Linux Mint 16 (Petra)3.11.0-12 generic (MATE) 1.6.1

JMRI is the standard download for Linux from Source . org.

I am new to both Linux (3 yrs) JMRI had worked with it some in Windows, Totally new in Linux.

I don't know what else to include, I'll be happy to answer questions.

hi does anybody know how to have multiple windows open at the same, so i can switch between them on mint xfce 17 64bit.
what i'm talking about is 4 windows open at the same time but i wan't to snap them together or use some piece of software instead
thanks

I have windows 7 laptop, Dell. I downloaded the newest edition of Ubuntu (Twice)to see if it would install and dual boot beside Windows 7. Unsucessful on several attempts. Once I reboot the computer it will give ma a choice of 7 or Ubuntu. I decide on Ubuntu it starts to boot into Ubuntu than a black screen with all types of Kernel error codes that i'm unfamilur with. one is---(1.292618) kernel panic-not syncing: no working init found.

Try passing init option to Kernel (see Linux Documentation/init.txt for guidance..

I am not sure what all this means any help would be appreactiated...