Unable To Ping Server Ip From Client System

I'm using Linux Mint 16 "petra" and normally I can see in the task bar whether or not there are software updates available or not. For the past week or so, I have not been able to get any connection to the mintUpdate site and the icon in the task bar shows a red X on the shield.

When I right-click on the icon and select "Information" I get the message below.

<<
++ Launching mintUpdate in user mode
++ Testing initial connection
-- No connection found (tried to ping google.com) - sleeping for 30 seconds
++ Starting refresh
++ Auto-refresh timer is going to sleep for 15 minutes, 0 hours and 0 days
-- Error in checkAPT.py, could not refresh the list of packages
>>

Can anybody out there inform me what may be wrong with either my system or with the mintUpdate site? I'm able to connect to the Internet without any problem.

Thanks in advance for your reaction!

Hi All,
Can "CentOS Linux release 7.0.1406 (Core)" 64 bit be used for server to provide services such as web, ftp, mail etc. I meant to say whether it is stable and can be used for server. Because the previous versions was just as "CentOS release 5.10, CentOS release 6.2, CentOS release 6.4" and so on. Thanks for your kind reply.

Hi

I am not able to ping google.com.
I made the changes in ifcfg-eth0 IP address to static.it was dchp.

please help.

Hi all!! Im new in this forum and also new at linux !!

I am installing an application that includes automatically the instalation of CentOS 6.3.

The server that hosts this application and OS had a power outage and then when i turn on the server again i get the error that you can see in this pictu http://postimg.org/image/7opm0xzel/

I have 2 disks in the system, 1 for the application and SO and other to store call recordings (thats what the application do, record calls!).

If I re-install the system it has no problem!! But i dont want to re-install the system every time i have a power outage because i lost too much and important information.

I have installed this application in other server and had no problem with power outage. In this server the diference is that it originally had raid and i "remove it" frome the BIOS. Maybe here is the problem??

Anyone can help me?? Remember im really new in linux !!

Hello, I am trying to implement this script, but for some reason, it limits to pinging 192.1681.1 and then 192.168.1.2 infinitely.
Any idea what is wrong with it? Thanks!

Quote:
PREFIX=192.168.1
OCTET=1
while [ "$OCTET" -lt "255" ]; do
echo -en "Pinging ${PREFIX}.${OCTET}..."
ping -c1 -w1 ${PREFIX}.${OCTET}
if [ "$?" -eq "0" ]; then
echo "OK"
else
echo "Failed"
let OCTET=$OCTET+1
fi
done

Hi guys when i try to "ssh or ping" on linux virtual machine using windows putty it's showing this attached image error. Thanks advance.

I have an Intel x86_64 system running rhel 7.0 I want to use this system as a Firewall. The system has two NICs. one NIC is defined with the static IP address from my ISP. The other NIC is also static i.e. no dhcp, and is assigned a LAN addrs of 192.168.10.6 It is plugged into a switch (192.168.10.1) that has other three devices plugged in. Each with it's own hard-coded LAN address (Netmask is 255.255.255.0) I have two zones active in the firewall config External (using the static ip from the ISP) and Internal (using the IP addrs of 192.168.10.6) I'm forwarding the following two ports 80 & 443 in both zones. External zone: ports 80 & 443 are forwarded to my switch (192.168.10.1) Internal zone: ports 80 & 443 are forwarded to my static IP addrs from my ISP. I have IP masquerading turned on in the External zones. However none of the other workstations (Windows 7 professional) and my "smart" TV (netflix access) are able to access the internet. Again I'm NOT using any dhcp, all IP addresses are hard coded. I can ping any LAN address from any LAN node. The Linux FW machine can access the internet. I've read thru the RHEL 7.0 Security guide regarding setting up the firewall and I believe I have all the elements defined properly ... It just doesn't work. I have the same set of DNS values defined on all systems.
They are the three DNS servers assigned by my ISP. I have ipv4 forwarding active on my Linux system. I have masquerading "turned on" in the External zone. The resolv.conf file has the ip addresses of the DNS servers as well as my switch.
However the windows 7 systems and my "smart" TV cannot access the internet.
Anyone who's really familiar with rhel firewall-config GUI and has any suggestions please respond.
Thanks
Guy

I have two centos 7 Server machines. "Machine-1" is having two NIC cards, one with public ip and another with private ip address. "Machine-2" is having a one NIC card with a private IP Address. how can i configure NAT on machine-1 to forward all TCP Traffic coming on public ip to the private ip of machine-2.

Pls give me a solve.its give me pain

Good Morning! I am supporting the coffee and Doritos industry with my frustration with this problem. I have been battling it for two months. I have several Red Hat books, the official Red Hat study guide, and have searched the forums for weeks with no avail. I was wondering if you have ever had this?

I am trying to "telnet server.example.com 25" or telnet in general. Both servers are running on a KVM on the 192.168.122.0/24 network.


[root@server ~]# telnet server.example.com
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Trying 192.168.122.191...
telnet: connect to address 192.168.122.191: Connection refused

I can ssh, run NFS, and also run internal postfix e-mails.

IPTABLES IS TURNED OFF ON BOTH CLIENTS

Postfix and Telnet is configured on both clients, with both listening:

[root@server ~]# netstat -tulpn |grep :25
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1802/

When I Telnet from client named 'Server' to client named 'ISCSI', tpcdump on client 'ISCSI' gives the following:

19:01:23.579330 STP 802.1d, Config, Flags [none], bridge-id 8000.52:54:00:2e:85:0e.8003, length 43
19:01:23.632750 IP server.57477 > iscsi.example.com.telnet: Flags [S], seq 2403459934, win 14600, options [mss 1460,sackOK,TS val 2679191 ecr 0,nop,wscale 6], length 0
19:01:23.632882 IP iscsi.example.com.telnet > server.57477: Flags [R.], seq 0, ack 2403459935, win 0, length 0
19:01:24.428091 IP server.57478 > iscsi.example.com.telnet: Flags [S], seq 942066757, win 14600, options [mss 1460,sackOK,TS val 2679990 ecr 0,nop,wscale 6], length 0
19:01:24.428163 IP iscsi.example.com.telnet > server.57478: Flags [R.], seq 0, ack 942066758, win 0, length 0
19:01:25.006222 IP server.57479 > iscsi.example.com.telnet: Flags [S], seq 2689610466, win 14600, options [mss 1460,sackOK,TS val 2680564 ecr 0,nop,wscale 6], length 0

I had used CentOS 6.6(desktop) before now install centos 7(desktop) on my pc.
In centOS 6.6 had “Connect to Server” in the Places menu, select “Public FTP” or “FTP (with login)” as the service type, enter the server name and other parameters (you can define bookmarks in this dialog box too),

But I cannot find it on centOS 7.I need to login Ftp via Connect to Server.