Hello everyone.
The sound isn't working on my debian live usb.
I've installed pavucontrol hoping that this would turn on the sound somehow. But it hasn't.
The program is showing RS880 HDMI audio [Radeon HD 4200] as my output device.
The play back bar moves when I play video on youtube but there is no sound.
On the configuration tab, I've tried all the options under 'built-in audio' - but none of these seem to work.
aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
Don't know why there are 3 playback devices...
lspci | grep -i audio
Code:
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series]
Not sure why there appears to be two sound cards...
On a Ubuntu site about a similar problem with the same sound card, they suggest creating /etc/asound.conf and adding code to it http://ubuntuforums.org/showthread.php?t=1647400
However, at this point, I'm a bit lost.
Can someone help please?
Hello Everyone,
I installed Linux Mint about four days ago, after a few hitches that I was able to figure out on my own, I got everything up and running and am enjoying my experience. There is one problem however, that I haven't been able to fix myself, so now I'm asking for the communities help. Since day 1 I haven't had any sound from Mint. I've tried videos through Firefox, music on Banshee, and system sounds but nothing is working at all. I have spent the better part of the last three days ripping my hair out and jumping from source to source looking for an answer and so far nothing has worked. I have tried a lot of things including forcing ALSA to reload, and even uninstalling and reinstalling ALSA and Pulse all together. Therein lies my next issue, I followed a guide off of the forums to try uninstalling and reinstalling ALSA and Pulse and it seemed all went according to plan, I reveived no errors during the process, but now my little sound icon in the system tray is missing.
Here is the info on my audio device:
Code: Select all
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel bus-ID: 00:14.2
Card-2: Advanced Micro Devices [AMD/ATI] Device 9840 driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Any help is greatly appreciated as having no sound, while not vital, is a major inconvenience.
Thank you!
I have a debian OS on a partition on my hard disk (sda1).
There was no sound because the ati rs880/radeon 4200 sound card needed drivers which were only in the debian 'non-free' version'.
So I added the non-free version to my install and also had to make a change to the GRUB bootloader file.
After that, I got sound.
Now I've installed a new debian distro to my second partition - sda2.
This time I ensured I installed the debian non-free version.
But I'm having trouble installing the drivers for the sound card.
I go into Synaptic package manager to install the relevant drivers and it gives me an error message:
Code:
Configuring libfglrx - install Fglrx driver despite unsupported graphics card?
I'm not sure what that means because I want the drivers for my sound card - not graphics.
When I press the 'Help' button, it says:
Code:
This system has a graphics card which is no longer handled by the Fglrx driver...
The above card requires either the non-free legacy Fgrlx driver
(package fgrlx-legacy-driver) or the free Radeon driver (package xserver-xorg-video-radeon).
This is fine because I can just install the 'free Radeon driver'.
But the Help message then says:
Code:
Before the Radeon driver can be used you must remove Fglrx configuration from xorg.conf
(and xorg.conf.d/)
Note that switching to the free Radeon driver requires the fglrx-driver package to be purged (not just removed).
So now I don't know what to do. Has anyone had this error message?
I know I can enable sound and have no problems with the graphics card because that's what happened with my original install on sda1.
But with the install on sda2, I don't know how to approach this problem.
Can anyone help please?
hello,
I installed an ATI card into my pc, now the sound is gone. I suppose this is due to the position of that new card which is now "0" (when I start alsamixer, I see the sound default is "HD-Audio Generic" with "Chip: ATI R6xx HDMI". I dont have a screen on the HDMI. I just want to take the "Intel ICH6" with "Chip: Analog Devices AD1981B" as the default card as per previous installation.
What should I do?
cat /proc/asound/cards
Code:
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xf0620000 irq 42
1 [ICH6 ]: ICH4 - Intel ICH6
Intel ICH6 with AD1981B at irq 21
Thanks.
I have installed a new Debian OS to try out the xfce desktop.
My radeon hdmi sound card needs non-free drivers and so I have no sound.
On my previous debian install with gnome desktop, I found a number of changes I had to make to get the sound working.
I have done all this with this new install with xfce.
However, one thing I haven't done yet is to change the System settings-Sound settings to use the hdmi sound card.
The problem is the xfce desktop doesn't have an icon for sound settings under System settings.
This is a bit weird. So I'm wondering if xfce has installed correctly or if it's missing a package so the System sound settings will show up.
Does anyone know what's going on?
Hello
I have linux mint 17.1 cinnamon installed on my computer, but the surround sound is not working (I only get stereo from two speakers)
When I run lspci I can see that my card is called
C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
there is another embeded card that came with my computer called
[AMD/ATI] Trinity HDMI Audio Controller
but I have my speakers hooked up to the first one and I have selected this card in the "output device" option on the lower right hand side of the screen, and I have selected the sound setting "analgog 4.0 surround".
My surround sound used to work when I had windows xp and xubuntu installed on an older computer with the same surround sound card attached. So I can't understand why it is not working now.
Can anyone help me with this?
when I run
aplay -l
I get:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 0: CMI8738 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 1: CMI8738 [C-Media PCI 2nd DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 2: CMI8738 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
inxi -Fzx
System: Host: rene-linuxmint Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Gnome Distro: Linux Mint 17.1 Rebecca
Machine: System: Gigabyte product: N/A
Mobo: Gigabyte model: F2A58M-DS2H version: x.x Bios: American Megatrends version: F1 date: 04/28/2014
CPU: Dual core AMD A4-4000 APU with Radeon HD Graphics (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 11977.2
Clock Speeds: 1: 1400.00 MHz 2: 1400.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Trinity [Radeon HD 7480D] bus-ID: 00:01.0
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz
GLX Renderer: Gallium 0.4 on AMD ARUBA GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card-1: Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio Controller driver: snd_hda_intel bus-ID: 00:01.1
Card-2: C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci port: d000 bus-ID: 03:06.0
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Qualcomm Atheros AR9485 Wireless Network Adapter driver: ath9k bus-ID: 02:00.0
IF: wlan0 state: up mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: e000 bus-ID: 01:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 820.2GB (35.7% used) 1: id: /dev/sda model: WDC_WD3200AVCS size: 320.1GB
2: USB id: /dev/sdc model: MQ01ABD050 size: 500.1GB
Partition: ID: / size: 290G used: 21G (8%) fs: ext4
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 0.4C mobo: N/A gpu: -3.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 169 Uptime: 4:07 Memory: 1209.9/3068.3MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Hardware device with all software conversions
sysdefault:CARD=CMI8738
C-Media CMI8738, C-Media PCI DAC/ADC
Default Audio Device
front:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Front speakers
rear:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI 2nd DAC
Rear speakers
surround40:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
4.0 Surround output to Front and Rear speakers
iec958:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct sample mixing device
dmix:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct sample mixing device
dmix:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct sample mixing device
dsnoop:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct sample snooping device
dsnoop:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct sample snooping device
dsnoop:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct sample snooping device
hw:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct hardware device without any conversions
hw:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct hardware device without any conversions
hw:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct hardware device without any conversions
plughw:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Hardware device with all software conversions
plughw:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Hardware device with all software conversions
plughw:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Hardware device with all software conversions
I just installed Ubuntu 14.04 on my Aspire E11 laptop. Everything works except sound. Nothing is muted. Alsamixer is in strange condition with no bars. Normally I find fixes by googling a question then finding then pasting commands into the terminal but all to no avail. I still have no sound. Any feedback would be appreciated.
Pulse audio controls show everything as normal with nothing muted.
This is the output forlspci -nnk | grep -i audio
$ lspci -nnk | grep -i audio
00:1b.0 Audio device [0403]: Intel Corporation ValleyView High Definition Audio Controller [8086:0f04] (rev 0e)
j
I tried setting my FiiO-Dac as default alsa sound device using changes in my alsa.conf, but after a reboot, alsa always went back to my broken onboard sound. Help would be appreciated.
cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
2 snd_usb_audio
3 snd_usb_audio
cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe600000 irq 16
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfe080000 irq 59
2 [Device ]: USB-Audio - USB PnP Sound Device
C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:12.2-2.3, full spe
3 [Audio ]: USB-Audio - DigiHug USB Audio
FiiO DigiHug USB Audio at usb-0000:00:12.2-2.4, full speed
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: Audio [DigiHug USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: Audio [DigiHug USB Audio], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
lsmod | grep snd
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 65536 1
snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
snd_usb_audio 151552 0
snd_hda_intel 28672 0
snd_usbmidi_lib 28672 1 snd_usb_audio
snd_rawmidi 28672 1 snd_usbmidi_lib
snd_seq_device 16384 1 snd_rawmidi
snd_hda_controller 28672 1 snd_hda_intel
snd_hda_codec 114688 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 16384 2 snd_usb_audio,snd_hda_codec
snd_pcm 90112 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller snd_timer 28672 1 snd_pcm
snd 69632 12 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_h da_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 16384 2 snd,snd_hda_codec
usbcore 200704 11 uas,snd_usb_audio,usb_storage,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xh ci_pci
Install Ethernet, Intel 4965AGN 802.11abgn
Postby xpdin on Fri May 15, 2015 6:53 am
Hi,
I can't set my wireless anymore like before with the next command,
Code: Select all
sudo apt-get install bcmwl-kernel-source
Can someone help me please?
The new log for
Code: Select all
inxi -Fxz
is:
xpd@Multix ~ $ inxi -Fxz
System: Host: Multix Kernel: 3.13.0-37-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.6 (Gtk 2.24.23) Distro: Linux Mint 17.1 Rebecca
Machine: System: Hewlett-Packard (portable) product: N/A version: F.09
Mobo: Hewlett-Packard model: 30D7 version: KBC Version 83.12
Bios: Hewlett-Packard version: 68MDD Ver. F.09 date: 01/11/2008
CPU: Dual core Intel Pentium Dual CPU T2390 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 7447.96
Clock Speeds: 1: 800.00 MHz 2: 1600.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV516/M62-S [Mobility Radeon X1350] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon FAILED: fbdev,vesa Resolution: 1152x864@60.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Broadcom BCM4311 802.11a/b/g driver: b43-pci-bridge bus-ID: 10:00.0
IF: N/A state: N/A mac: N/A
Card-2: Intel 82562GT 10/100 Network Connection driver: e1000e ver: 2.3.2-k port: 5000 bus-ID: 00:19.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (1.7% used) 1: id: /dev/sda model: Hitachi_HTS54252 size: 250.1GB
Partition: ID: / size: 49G used: 4.1G (9%) fs: ext2 ID: swap-1 size: 40.00GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 48.0C mobo: 27.9C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 141 Uptime: 2 min Memory: 191.2/2015.6MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
xpd@Multix ~ $
Thank you very much.
Hello, my video card "Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350]"
create something which can be seen with dmesg "drm: registered panic notifier".
Should I install the fglrx driver instead of keeping the open source radeon as per current install?
I have antix which is a debian wheezy based system https://wiki.debian.org/ATIProprietary# ... 2Wheezy.22
Thanks for any advice before I do it.