Slackware 14.1/adduser Command/session Files

hi there once again
Now I am getting this problem which running the cmd "honeyd -d -f honeyd.conf"
root@kali:/etc/honeypot# honeyd -d -f honeyd.conf
Honeyd V1.5c Copyright (c) 2002-2007 Niels Provos
honeyd[4726]: started with -d -f honeyd.conf
honeyd[4726]: listening promiscuously on eth0: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip )) and not ether src 98:4b:e1:94:62:46
honeyd[4726]: [eth0] trying DHCP
honeyd[4726]: Demoting process privileges to uid 65534, gid 65534
honeyd[4726]: [eth0] got DHCP offer: 192.168.23.2
honeyd[4726]: Updating ARP binding: 00:00:24:26:26:1d -> 192.168.23.2
honeyd[4726]: arp reply 192.168.23.2 is-at 00:00:24:26:26:1d
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1

what does it mean? because it starts to spam the terminal with such errors. or it is not??

I think, I have to edit the "honeyd.conf" file, but no clue.
the following is my honeyd configuration.

route entry 10.0.0.1
route 10.0.0.1 link 10.2.0.0/24
route 10.0.0.1 add net 10.3.0.0/16 10.3.0.1 latency 8ms bandwidth 10Mbps
route 10.3.0.1 link 10.3.0.0/24
route 10.3.0.1 add net 10.3.1.0/24 10.3.1.1 latency 7ms loss 0.5
route 10.3.1.1 link 10.3.1.0/24

# Example of a simple host template and its binding
create template
set template personality "Microsoft Windows XP Professional SP1"
set template uptime 1728650
set template maxfds 35
# For a complex IIS server
add template tcp port 80 "sh /usr/share/honeyd/scripts/win32/web.sh"
add template tcp port 22 "/usr/share/honeyd/scripts/test.sh $ipsrc $dport"
add template tcp port 23 proxy $ipsrc:23
add template udp port 53 proxy 141.211.92.141:53
set template default tcp action reset
# Use this if you are not running honeyd as 'honeyd' user:
# Debian-specific (use nobody = 65534 instead of 32767)
# set template uid 65534 gid 65534

create default
set default default tcp action block
set default default udp action block
set default default icmp action block

create windows
set windows personality "Microsoft Windows XP Professional SP1"
set windows default tcp action reset
add windows tcp port 135 open
add windows tcp port 139 open
add windows tcp port 445 open

set windows ethernet "00:00:24:ab:8c:12"
dhcp windows on eth0


urgent help needed please. thanks in advance

i need to complete this exercise but my code has some issues
HERE is the PRoblem:
Create a script that can accept ANY amount of numbers from the command line. Process the numbers one at a time, where numbers greater than 10 print “large”, numbers less than or equal to 10 print “small”
E.g. process 5 10 15 would print
small
small
large

and here is my code so far
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi

any help would be greatly appreciated

Hello,

I installed Mint 17 xfce onto a friend's HP netbook a few months ago. Up until now all has been working pretty perfectly.

From this evening, she tells me that after she types in her password the following message appears:

no exec. line in this session file [her password appears here in plain text!] running the GNOME failsafe session instead

The only option at this point is seemingly to click ok. After that, this message appears:

Could not find the GNOME installation will try running the failsafe xterm session

Again the only option is to click ok, then this appears for a few seconds:

Cannot find xterm start a failsafe session

Then it goes to a black screen (though you can see the mouse cursor) on which it stays indefinitely.

She tells me that she wasn't trying to do anything other than web browsing and email checking before this started happening so there doesn't seem to be any logical reason behind it. Does anybody have any idea what is happening and how to fix it?

i try to install centreon but at step 7 i have this message "" Could not find CENTREON_ETC. Session probably expired.""
plz help me to solve it ...i tried all the oether issues but it does not work

I am not sure what happened here, and I find it oddly disturbing that a Putty session from Window could do this, but here is what I did -

I was attempting to open a ssh redirect session from Putty command line on my W7 work PC to my home PC running Ubuntu 14.04. I've done this before with the Putty GUI and had no issues at all, but this time I was using cmd line and it never did connect. I ran this command:
Code:

putty -ssh -D 1080 -P 22 domain.com

The Putty window opened but never connected. I tried twice and when it didn't connect, I gave up and went back to the GUI. I connected with the GUI just fine, but after connecting an SSH session to my Ubuntu server at home, I noticed it was acting odd.

Long story short: It was in a "read-only" mode, saying the file system was read-only. I couldn't run apt-get update or even create a new folder in my Home folder or desktop. I remotely rebooted the machine and it never came back online.

When I got home I checked it, and it told me that Ubuntu had found some errors, and was asking if I wanted to correct them. I said yes and it took a short while, but then finally let me log back in.

After this, the box is about 90-95% back to normal except for a couple of odd things that I don't understand.

The main issue is that my Samba shared drives are no longer working. The fstab file looks the same and can connect to other machines, but nothing can connect back to the Ubuntu box. The folder permissions are correct also. I have a CentOS7 box, a Fedora laptop and a W7 box - none of them can connect to my Ubuntu box. I only run Samba and connect with it, even from Linux boxes, just to make it simple (since Windows is stupid and can't use NFS) - this has always worked in the past. Now for the life of me, I can't figure out why nothing will connect.

Is there a logfile or trouble-shooter I could look at it see what happened? It should be in /var/log somewhere, but I don't know where to start. SSH? Samba? The entire filesystem was read-only for a short while, so is there a FS or System log in /var/log?

I am kinda confused on this one, any help is appreciated.

Hello everyone,

I just tried upgrading to Linux Mint 17 from version 16, and I obviously did something wrong since when I'm prompted for my password, I get an error message saying "failed to load session cinnamon."

Then there are some error logs which say failed to connect to virtual box kernel service for several lines, then below that "unable to find cinnamon-fullback-mount-helper."

I tried doing ctrl alt f2, but I get a whole bunch of gobbledy gook which I'm unable to copy and paste.

I also tried burning a new DVD-R with Mint 17, but my computer doesn't even read it when I power it on. Otherwise, I would have tried reinstalling the OS.

So any suggestions you have will be greatly appreciated.

Thanks.

Hello Everyone,

I have a question about how to give sudo privileges to a user that log in via public key without password.

I created a normal user and I added this user to the "visudo" folder with ALL privileges.

when the user is logged in the system via public key and the user wants to become a root, a password is requested but i don't want to type the password.

Also to add the public key to the root it is not possible because i track the user log in in the system and if they log via root i cannot do that.

Thank you in advance.

hi guys

i am trying to find the "size" of a "block" of data in LARGE data files, the example below test_data.txt is very simplified. by "size" i mean the difference in line numbers of a block, and the "size" will be constant throughout the file so

1234 6.600000 4321
1234 8.500000 4321
1234 1.800000 4321
1234 2.300000 4321
1234 8.500000 4321
1234 2.800000 4321

if i define a block as whenever i find 8.500000 in the second column, then in the example the the block size would be 3 becasue 8.500000 occurs on the 5th line and on the 2nd. right now i am using

Code:

 grep -n "8.500000" test_data.txt | cut -f1 -d:

and/or

Code:

 awk '/8.500000/ {print FNR}' test_data.txt

obviously i don't remeber how to tag text as code?

btw, the grep command is much much faster

both of these commands give an entire list (long list of number for files greater than a gig) of line numbers which i then have to subtract one from another to come up with 3 in the example. not that i'm opposed to doing math, but i would think awk or grep should be able to do this for me

ideas?

tabby

Dear Friends ,

I have more that 20 linux server running into my environment . It is very difficult for me to take system report like ( Disk usage, user session information etc) . So I want to prepare a centralized report on a linux server so that I can take the following report :

1) Disk usage (df -h)
2) Session Login/Logout report (lastlog/last)

Is there any available tool in linux to prepare it or give me a good idea to manage it .

I have SLES 11.3 (x86_64).
When I try to connect to this server via ssh or console without kde everything is OK.
But when I try to connect to this server through kde, in /var/log/messages I can see:

Mar 25 10:03:04 server1 kdm: :0[6560]: Cannot open ConsoleKit session: Unable to open session: Failed to execute program /lib64/dbus-1/dbus-daemon-launch-helper: Success
Mar 25 10:03:04 server1 kdm: :0[6560]: Client start failed
Mar 25 10:03:04 server1 kdm: :0[6560]: Cannot close ConsoleKit session: Unable to close session: no session open

# ls -l /lib64/dbus-1/dbus-daemon-launch-helper
-rwsr-x--- 1 root messagebus 47912 Oct 15 2012 /lib64/dbus-1/dbus-daemon-launch-helper

Can you help me to resolve my problem?