Grafic Card

When I installed mint today from cd, I had to use the save-mode because of the nvidia card. So I was aware I had to change driver after install.

Right after install I checked these '10 thing to first do after install'.
http://itsfoss.com/things-to-do-afte...mint-16-petra/
I did these
Improve battery life
Change screensaver timing
Install RAR

Then I checked the driver manager to deal with the graphic driver. I tried all 3 in the driver manager, but with each mint crashes with this message right after login.

Quote:
cinnamon just crashed you are currently running in Fallback Mode
It asks if I want to restart, click 'yes' and it just refreshes the screen with the same message. click 'no' the message goes away but cinnamon does not work.

So I don't know if its crashing because of the driver or because of those things I changed after the install.

I googled some and this issue is all over linux forums, but I can't find a solution anywhere.

I install fgrlx driver on vivid os the driver look like is istalled correct on system and built the necessary kernel modules because the dpkg log not report any errors, i configured the driver by simple commands like:

sudo aticonfig --initial

sudo aticonfig --screen-layout=on

i reboot the machine , but i face an strange issue the boot splash screen is hangup,i cant enter my lvm password to boot the system, i was have a chance to boot into rescue mode when boot to rescue mode the display not read by the system i try to export display by

export DISPLAY=:0

I try to configure /etc/X11/xorg.conf there is not good resaults the boot splash still hang up

I edited the grub , i uncomment "quiet splash" modified by "nomodeset"

i can boot without boot splash but im faced other issue i cant switch to virtual tty

i dont know is this a bug in the driver or in the kernel

any suggest

new computer from boxes, does not install nvidia driver
Booted from USB then ran YaST, I am new with OpenSuse but have two times before installed OpenSuse on fresh HDD's and Nvidia cards with ease.

The symptoms are like when I switched from a GTX 640 that only has mother board power to the GTX 750 Ti and needed power that I did not connect at first. Until I added extra power to the graphics card I only got a single low res VGA output. This 750 card definitely has power but still can only provide single low res to VGA output.

Terminal (dmesg) ......The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:1380)installed in this system is not supported by the 304.125 NVIDIA Linux driver release. Please see 'Appendix A - supported NVIDIA GPU Products' in this release's README, available on the Linux driver download page at www.nvidia.com. .... None of the VVIDIA graphics adapters were initialized!

Terminal (uname -r) 3.16.7-21 -default [OpenSuse version]

Terminal (/sbin/lspci) VGA Compatible controller: Nvidia Corporation GM107 [GeForce GTX 750 Ti] (rev 02)

have tried:
1. different power cables to graphic card
2. two GTX 750 Ti cards, neither work.
3. re-installed OpenSuse
4. removed card and mother board can run two monitors in high res. DVI cables are new and work. Monitors (4) are all AOC i2367 and working.

5. added to repository 'bumblebee' which contains NVIDIA drivers and tried rebooting. I am not good at repositories yet. However, I didn't need to do this twice before on new installs with NVIDIA cards.

6. downloaded from www.geforce.com file:///home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(1).run but when I run it error, "The file /home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(3).run was opened with UTF-8 encoding but contained invalid characters."It is set to read-only mode, as saving might destroy its content.
Either reopen the file with the correct encoding chosen or enable the read-write mode again in the menu to be able to edit it."

Hardware list: Asus H81M-E motherboard, i5 4460 CPU, 550W power, Asus GeForce GTX 750 Ti graphic card,

Note: two graphic cards on hand, both work in another OpenSuse computer.

I am just learning Linux so I need simple step by step instructions.

Thank you in advance.

I bought an old Thinkpad R51 (with Pentium M CPU) and have installed Linux Mint 14 which supports non-PAE CPUs.
The seller said the touchpad did'nt work any more after installing windows 7 (And the OS key was illegal).
I want it to work and found The UltraNav driver which is touchpad driver for the ThinkPad R51 at LenovoDriver.com.

I did not find a version for Linux, though. And I found this comment:
"Your ThinkPad R51′s touchpad might not operate for the reason that the touchpad is incompatible together with the operating technique installed around the laptop. That is ordinarily the case when applying an unsupported version of your Windows OS or an option OS which include Ubuntu".

I downloaded the version for Windows XP and tried to run it in the Terminal. But this is my very first day on Linux Mint (!!!) and I did not get it to work.

Is the touchpad lost forever, or does some solution exist?
Does anyone know?

Hello.

I am a newcomer to Linux, coming from Windows, desktop PC user. I already have a few months' experience with Ubuntu and Mint. I can handle some basic terminal commands, but I prefer the GUI whenever possible.

I'm not an IT specialist, far from it. Just a normal average computer user who can read a few things if they are understandable enough, and wants a decent operating system. So please speak to me in simple human terms, I can handle high tech jargon only so much. Thanks.

I have 2 main questions:

1. I've encountered problems when booting from LiveCD (written to USB) with both Mint and Lubuntu. The boot menu appeared but when I pressed any of the “try live” or “install” options, the screen froze with garbled checkerd pixels. Web searching for solutions, I found the thing with accessing special boot options and adding kernel parameters like 'nomodeset' and 'noaccel' and doing that I could proceed with installation. Then, after installing proprietary drivers, everything was fine.

This is not the first time this happened. As far as I understand this is related to the nouveau driver.

Does this happen only with some distros, like, for example, Ubuntu and its derivatives, or is it a larger problem from the main Linux kernel? From what I've read on some forums, such problems happened with other graphic cards as well, and it seems to be an old problem as old as 2011 if not older.

Why nothing could have been done to fix these issues so far? Couldn't all distros use some option from boot menu to either go with simple safe vesa graphics mode or a text based helpful install that might guide the user afterwards in downloading the proprietary drivers if s/he desires?...

And what is the main cause of the problem? Nvidia not doing FOSS drivers? Nouveau not being flexible enough? Linux kernel not keeping up? Particular distros that don't care about adding an extra boot option? A combination of all these? What is to be done? Would switching to other distro help in this regard? how would I know which distros use nouveau and which don't?

2. I'd like to look into other distros as well. What I need is stability, meaning as bug free as possible, as few apps hanging or crashing as possible, while still being user friendly. But no rolling realeases, please. I want to update the system without fear that I won't boot into desktop – again!

I need distros that come with multimedia codecs, Flash and stuff out of the box and also an easy option to install the proprietary video card graphics driver. I am all for FOSS, but for now I'm also being realistic, and unfortunately have to go with proprietary drivers.

What recommendations do you have?

Thank you.

hello, i have installed ubuntu one hour ago and i cant change my screen resolution. In displey options i have only two basic options: 1024x768 and 800x600. My monitor is has a resolution of a 1920x1080 and on windows it works fine. I havent checked third-party softwares when i was installing ubuntu and i think that i past by graphic driver(on windows i had ati control center). If anyone can help im using Gigabyte radeon r7 260x oc 1gb ddr5. I would realy love to change my screen resolution and play games.

I downloaded Mint 15 - MATE and made an iso image DVD disk. Then rebooted with DVD in drive. The followinh happened
Splash screen with Linux Mint on
Then Automatic boot in 9, 8, 7 etc secs
Then Linus Mint 15 in Courier with 4 dots underneath
After 2/3 mins screen turned black, covered in white U letters with Welcome to Linux in background
Then wide red and black horizontal bands
Then a more graphic screen with 2 Linux Mint logos on green and white bands, top one a bit fuzzy. Cursor has a red box around it. Icons for Computer, Mint Home and Install Linux mint 'ghosted' with background showing through
Firefox loads, again ghosted, but cannot access internet even though wifi light lit on computer.

Computer is Fujitsu Seimens Amilo L7320 1.7 GHz and 960 RAM

What is going wrong?

Want to try Linux as computer freezes in Windows XP after about 20 mins.

Help appreciated.

Hey guys. So I just went out and bought a Sager 8268-s (clevo p150sm-a) With an i7 4910mq and a Nvidia 980m gt. As I am a computer tech by trade, every time i see Windows i get horrible PTSD so i decided to try Linux instead. After many hours of trying to get a dual boot working finally got Linux Mint 17 Cinnamon installed on my computer, but when I went to install the Nvidia driver it landed me in fallback mode which I could not escape. So then I tried Ubuntu 14.04 LTS thinking maybe Mint was incompatible with the driver and the same thing happened.

So here is my method:

(sorry i don't know how to make a code box :/ )

First I log in to get root access:

$ su

Then I Update the xorg:

$ sudo apt-add-repository ppa:xorg-edgers/ppa

Then update my system:

$ sudo apt-get update && sudo apt-get dist-upgrade

Then i go into Virtual terminal (Ctrl+Alt+F1) and disable the display manager:

$ sudo service mdm (or lightdm for Ubuntu) stop

Then i install the drivers which i have done multiple ways:

$ sudo apt-get install nvidia-current nvidia-settings

or

$ sudo apt-get install nvidia-343 nvidia-settings

or by downloading the driver from Nvidia (first designating the file as executable)

$ sudo sh nvidia.run && sudo apt-get install nvidia-settings

Then after install, I create the config file:

$ sudo nvidia-xconfig

Then I reboot. After I get the low res mode in Ubuntu or fallback mode in Mint and Driver manager doesn't detect any proprietary drivers and I have to reinstall to get the OS working again. Any suggestions would be greatly appreciated.

Hi ,

I'm new to Linux , I installed Kali linux on my pc and the wifi card isn't working ..

It is a usb wifi card , It has a cd for its driver. There is a folder in the cd called " Linux Driver " and here's what is inside it

First folder :

http://imgur.com/WTNgnEm

Second folder :

http://imgur.com/PyH07Cs

And here it is when I write lsusb :

http://i.imgur.com/NiPbbxSh.jpg

I'd like to know the steps to install it , Thanks in advance ..

hello there,
OK here is the problem;
Whenever I try to start my laptop the grub menu loads as usually, it starts booting but upon completion, there is this blinking cursor and screen and then nothing. It started when I logged out of one of my account and logged into Root account and again logged out of the root account. That was the time when this thing started.
I dont know what happened. I researched, found lots of threads but with no help..
There is no any graphics card in the laptop. (so couldnt be a driver issue i think)
Edited the grub ( quite splash nomodeset, etc etc,, but didnt work )
I really dont know what to do at this stage,
P.S i am a noob though.