Elementary Luna 'grub-efi Package' Installation Failure

After creating a bootable usb using Universal USB Installer. I booted up the sytstem (Dell Inspiron N4110) F12 boot on usb, did the install, everything went well until after copying files and then the error message that "The grub-pc package failed to install into /target.. So i continued without a boot loader and now am trying to figure out how to get it back.
Previously i did a perfect dual boot of Kali Linux wherein the Grub boot loader was present. I did however uninstall Kali, reclaim HDD space, and even use EasyBCD to remove Grub(i believe).
Also worth noting is that before this dual boot with pignuy and after uninstalling kali linux i did a complete reinstallation of my windows 7 system using the recovery HD.

Now i would like to know how i could get grub boot loader back onto my system so that i can boot up Pinguy OS. Thanks

Hi everyone.
Earlier I posted a reply on a thread about a problem with partitions while installing Elementary OS Freya as dual-boot, and yancek answered giving me a link with a tutorial (thank you!).

However, after I continue with the installation it stopped with an error saying that grub wasn't installed, something like that. But when I start my computer (with USB boot priority), pops a window with the option to 'Try Elementary..." and "Install Elementary..." and if I press Esc a grub console appears. Doesn't that mean grub is installed? What should I do to fix this?

Best regards,
a Linux amateur

Hello!

TL;DR: Deleted Linux partition from Windows. Stuck at Grub rescue prompt.

I'm sorry to trouble you guys, because I'm an idiot.

So I'm wanting to dual-boot Kalilinux and Windows 8.
I went through the steps such as creating a bootable USB, changing the
boot order and so on. I get into Kali, start Gparted and try to partition stuff.

I'm far from an expert, so I wasn't sure what to do. Long-story short, I
didn't seem to get Kali installed correctly, due to something with an EFI
drive being required. So I boot into windows and then stupidly, because it said in the guide,try to "uninstall" Kali by removing it's partition, inside Win8 haha... So I did.

Now I simply get the Grub rescue command prompt when I boot from the same
USB and I have no idea how to fix it. I've run bootrec.exe/fixmbr in Windows haha,
for what it's worth. However Grub can't find any partition it says.

In windows, I have like... 2-3 Recovery partitions. Does anyone know how to remove
them??? I've tried to clear as much as I can, besides the C drive and Auxillary D drive.

Any advice would be very appreciated.

I have tried installing a Ubuntu OS onto a partition (sda3).
When I had difficulties with the install, I decided to delete everything from the partition.

But now when I boot the computer, I get taken to the 'grub rescue' prompt.
I have tried to find grub in my other partitions (sda1 and sda2).
However, the command 'ls (hd0,msdos1)/' for example, does not show a grub directory.
It must've transferred grub to sda3 somehow and now I've deleted it.

I have debian live USB and am trying to install grub with:
Code:

apt-get install-grub /dev/sda

But I get the error message:
Code:

bash: grub-install: command not found

So now I don't know what's going on. Can anyone please help?

Please Help,

I have a Windows 7 and Fedora 20 dual boot pc .
Today i deleted the fedora partition from windows disk management and then restarted my pc.
Now i am stuck in the 'grub rescue > ' screen ...... It is showing 'no such partition ' , after searching through the internet i tried these commands......

grub rescue > set boot=(hd0,msdos6)

grub rescue> set prefix=(hd0,msdos6)/*boot/grub

grub rescue> insmod normal (after this line ,i am getting the error , grub rescue > unknown filesystem)

grub rescue> normal

Don't know what to do ,but i want to get back to the windows os first ,also i don't have the windows or fedora live cd . My Windows recovery is stored in my pc hard drive....... plzz help so that i can resolve this issue

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

Hi,

Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.

Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.

Hello, I hope someone can assist. I have installed 17 on 2 laptops and 17.1 on another all with windows 8 upgraded to 8.1 Now I have a new PC with 8.1 and cannot get 17.1 to install. I go thru all the steps but when I get past "something else" and choose the "free space" that I partitioned in windows and hit install the window pops up with "no root file system is defined" "Please correct from partitioning menu.. I have never had this happen, did I not do something? There is 1 300mb(fat32, efi) partition, ntfa, free space(which is where I am trying to install Linux), 1 small and 1 large "free space". Then the define for boot loader installation, which I do not remember needing to do before. Can someone please help. The PC is an Acer Aspire, amd10, 3.7ghz, quad core, radeon hd 8670 graphics , 1 terabyte hdd, 4gb ram, windows 8.1

Hello all,

I am new to linux but not new to PC's.

I am self taught in everything i know so far.

I have an issue i am looking for some guidance on, i have burned an ISO copy of AVLinux & booted from the Live DVD.

chose to install on partition & created all the necessary file systems etc with GParted then proceeded with the install.

Completed install but when i try to boot no joy.

I have EasyBCD installed on Vista to manage to boot processes.

I am able to get to Grub4dos window & grub> prompt.

I have tried many commands of which i have identifeid the partition is there as correct filesystem, when running the /vmlin....TAB command it locates the name of the linux distro, if i set the drive partition to makeactive it boots up saying no operating system them have to change it back to Vista.

I have two pics that show the grub configuration reading from the live DVD, the install appears to have some missing or not right as opposed to the DVD, can anyone assisst how i can fix this issue?

Do i have to copy each file over manually from the Live DVD's folders?

Cant attach images here so here is the differeneces,

these are the listing on the Grub configuartion being read using the Live DVD,

1. /etc/grub.d
2. /boot/grub/device.map
3. grub-install
4. grub-mkconfig
5. grub-mkdevicemap--device
6. grub-mkfont
7. /boot/grub
8. /boot/grub/grub.cfg
9. /etc/default/grub

Here is what way they are on Live DVD,

1. Present
2. Present
3. Present
4. Present
5. Present
6. Present
7. Present
8. Yellow information bubble
9. Present

My install on partition,

1. Present
2. Yellow information bubble
3. Red X bubble
4. Red X bubble
5. Yellow information bubble
6. Present
7. Yellow information bubble
8. Yellow information bubble
9. Present

what do i need to do to remedy this?

i have attempted the install on couple of different drives, no success.

Ubuntu 12.04

I installed updates, which included a new kernel. I went to remove one of the older kernels and got:

Code:

jnojr@DEV:~$ sudo apt-get purge linux-image-3.13.0-46-generic
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-3.13.0-46-generic gir1.2-ubuntuoneui-3.0 wireless-regdb iw
  linux-headers-3.13.0-46 crda linux-headers-3.5.0-23-generic lesstif2
  linux-headers-3.5.0-23 libubuntuoneui-3.0-1 thunderbird-globalmenu
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
  linux-image-3.13.0-46-generic*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 197 MB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 340656 files and directories currently installed.)
Removing linux-image-3.13.0-46-generic ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
update-initramfs: Deleting /boot/initrd.img-3.13.0-46-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found Windows Vista (loader) on /dev/sda1
Found CentOS release 6.6 (Final) on /dev/sdb1
Found linux image: /boot/vmlinuz-3.13.0-51-generic
Found initrd image: /boot/initrd.img-3.13.0-51-generic
Found linux image: /boot/vmlinuz-3.13.0-49-generic
Found initrd image: /boot/initrd.img-3.13.0-49-generic
Found linux image: /boot/vmlinuz-3.13.0-48-generic
Found initrd image: /boot/initrd.img-3.13.0-48-generic
Found Windows Vista (loader) on /dev/sda1
Found CentOS release 6.6 (Final) on /dev/sdb1
Found memtest86+ image: /boot/memtest86+.bin
error: syntax error.
error: Incorrect command.
error: syntax error.
error: Incorrect command.
error: syntax error.
error: line no: 146
Syntax errors are detected in generated GRUB config file.
Ensure that there are no errors in /etc/default/grub
and /etc/grub.d/* files or please file a bug report with
/boot/grub/grub.cfg.new file attached.
done
Purging configuration files for linux-image-3.13.0-46-generic ...
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic
run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-46-generic /boot/vmlinuz-3.13.0-46-generic

I have no idea how I'd "ensure there are no errors" in the /etc/grub related files... I have no idea what's supposed to be there. Looking at the line it's complaining about in /boot/grub/grub.cfg.new doesn't tell me anything. How do i find out what it's unhappy about?