Ata1 Srst Failed (errno=-16)

I`ve got this error message:
Sun May 31 01:03:53 2015
Disk cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Disk exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 fro
Disk status: { DRDY ERR }, Disk configured for UDMA/33
Disk qc timeout (cmd 0xa0)
sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata1: EH complete
ata1: link is slow to respond, please be patient (ready=0)
ata1: soft resetting link
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata1: device not ready (errno=-16), forcing hardreset

Could you help me with the solution?
Thanks a lot.

Hi! I have a failing disk and the kernel messages are the following:
Code:

Απρ 01 15:07:02 Arch kernel: ata1: lost interrupt (Status 0x50)
Απρ 01 15:07:03 Arch kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Απρ 01 15:07:03 Arch kernel: ata1.00: failed command: WRITE DMA
Απρ 01 15:07:03 Arch kernel: ata1.00: cmd ca/00:08:20:32:6a/00:00:00:00:00/e4 tag 0 dma 4096 out
                                         res 40/00:00:4b:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Απρ 01 15:07:03 Arch kernel: ata1.00: status: { DRDY }
Απρ 01 15:07:03 Arch kernel: ata1: soft resetting link
Απρ 01 15:07:03 Arch kernel: ata1.00: LPM support broken, forcing max_power
Απρ 01 15:07:03 Arch kernel: ata1.00: LPM support broken, forcing max_power
Απρ 01 15:07:03 Arch kernel: ata1.00: configured for UDMA/133
Απρ 01 15:07:03 Arch kernel: ata1.01: configured for UDMA/133
Απρ 01 15:07:03 Arch kernel: ata1: EH complete
Απρ 01 15:09:19 Arch kernel: ata1: lost interrupt (Status 0x50)
Απρ 01 15:09:20 Arch kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Απρ 01 15:09:20 Arch kernel: ata1.00: failed command: READ DMA EXT
Απρ 01 15:09:20 Arch kernel: ata1.00: cmd 25/00:20:e8:b2:fd/00:00:18:00:00/e0 tag 0 dma 16384 in
                                         res 40/00:00:4b:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Απρ 01 15:09:20 Arch kernel: ata1.00: status: { DRDY }
Απρ 01 15:09:20 Arch kernel: ata1: soft resetting link
Απρ 01 15:09:20 Arch kernel: ata1.00: LPM support broken, forcing max_power
Απρ 01 15:09:20 Arch kernel: ata1.00: LPM support broken, forcing max_power
Απρ 01 15:09:20 Arch kernel: ata1.00: configured for UDMA/133
Απρ 01 15:09:20 Arch kernel: ata1.01: configured for UDMA/133
Απρ 01 15:09:20 Arch kernel: ata1: EH complete

I have 2 disks: sda, sdb. Which disk is it referring to?

Thanks a lot

[root@Laptop yum.repos.d]# yum install transmission*
Loaded plugins: langpacks, refresh-packagekit
adobe-linux-x86_64 | 951 B 00:00:00
fedora/20/x86_64/metalink | 17 kB 00:00:00
fedora | 3.8 kB 00:00:00
rpmfusion-free | 3.3 kB 00:00:00
rpmfusion-free-updates | 3.3 kB 00:00:00
rpmfusion-nonfree | 3.3 kB 00:00:00
rpmfusion-nonfree-updates | 3.3 kB 00:00:00
updates/20/x86_64/metalink | 13 kB 00:00:00
updates | 4.9 kB 00:00:00
http://mirrors.xmission.com/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.fdcservers.net/fedora/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.osuosl.org/linux/updat...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.rit.edu/fedora/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://repo.atlantic.net/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.uci.edu/mirrors/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.metrocast.net/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://linux.mirrors.es.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cs.pitt.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.hmc.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.uoregon.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.mirrors.tds.net/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.nexcess.net/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.web-ster.com/fedora/up...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.gtlib.gatech.edu/pub/fedor...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://www.gtlib.gatech.edu/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.steadfast.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.cat.pdx.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://archive.linux.duke.edu/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.kernel.org/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.syringanetworks.net/f...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://lug.mtu.edu/fedora/linux/upda...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.osuosl.org/pub/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cc.vt.edu/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.pnl.gov/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.redsox.cc/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.symnds.com/distributio...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.unl.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
ftp://ftp.wallawalla.edu/pub/mirrors...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://fedora.bhs.mirrors.ovh.net/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://dl.fedoraproject.org/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.cogentco.com/pub/linux...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirrors.tummy.com/pub/fedora....ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.clarkson.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://ftp.linux.ncsu.edu/pub/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
http://fedora.mirrors.pair.com/linux...ta/repomd.xml: [Errno 12] Timeout on http://fedora.mirrors.pair.com/linux...ta/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
updates | 4.9 kB 00:00:00
http://mirror.ancl.hawaii.edu/linux/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.
updates | 4.9 kB 00:00:00
http://kdeforge2.unl.edu/mirrors/fed...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
Trying other mirror.


One of the configured repositories failed (Fedora 20 - x86_64 - Updates),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:

1. Contact the upstream for the repository and get them to fix the problem.

2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).

3. Disable the repository, so yum won't use it by default. Yum will then
just ignore the repository until you permanently enable it again or use
--enablerepo for temporary usage:

yum-config-manager --disable updates

4. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:

yum-config-manager --save --setopt=updates.skip_if_unavailable=true

failu repodata/repomd.xml from updates: [Errno 256] No more mirrors to try.
http://mirrors.xmission.com/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.fdcservers.net/fedora/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.osuosl.org/linux/updat...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.rit.edu/fedora/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://repo.atlantic.net/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.uci.edu/mirrors/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.metrocast.net/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://linux.mirrors.es.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cs.pitt.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.hmc.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.uoregon.edu/fedora/lin...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.mirrors.tds.net/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.nexcess.net/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.web-ster.com/fedora/up...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.gtlib.gatech.edu/pub/fedor...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://www.gtlib.gatech.edu/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.steadfast.net/fedora/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.cat.pdx.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://archive.linux.duke.edu/pub/fe...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.kernel.org/fedora/upd...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.syringanetworks.net/f...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://lug.mtu.edu/fedora/linux/upda...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.osuosl.org/pub/fedora/linu...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cc.vt.edu/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.pnl.gov/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.redsox.cc/pub/fedora/l...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.symnds.com/distributio...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.unl.edu/fedora/linux/u...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
ftp://ftp.wallawalla.edu/pub/mirrors...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.bhs.mirrors.ovh.net/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://dl.fedoraproject.org/pub/fedo...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.cogentco.com/pub/linux...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirrors.tummy.com/pub/fedora....ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://mirror.clarkson.edu/fedora/li...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://ftp.linux.ncsu.edu/pub/fedora...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://fedora.mirrors.pair.com/linux...ta/repomd.xml: [Errno 12] Timeout on http://fedora.mirrors.pair.com/linux...ta/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://mirror.ancl.hawaii.edu/linux/...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
http://kdeforge2.unl.edu/mirrors/fed...ta/repomd.xml: [Errno -1] repomd.xml does not match metalink for updates
[root@Laptop yum.repos.d]#

Hi everyone,
i tried to install mysql on my slackware 14.1.
typed mysql_install_db --user=mysql and went to the automatic configuration of secure access and receive this "Enter current password for root (enter for none):
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysql/mysql.sock' (2)".
How can remove this installation, to try to reinstall the db?


And another error when try to reinstall :
"bash-4.2# mysql_install_db --user=mysql
Installing MariaDB/MySQL system tables in '/var/lib/mysql' ...
150130 9:40:11 [ERROR] mysqld: File '/var/lib/mysql/aria_log_control' not found (Errcode: 13)
150130 9:40:11 [ERROR] mysqld: Got error 'Can't open file' when trying to use aria control file '/var/lib/mysql/aria_log_control'
150130 9:40:11 [ERROR] Plugin 'Aria' init function returned error.
150130 9:40:11 [ERROR] Plugin 'Aria' registration as a STORAGE ENGINE failed.
150130 9:40:11 [ERROR] mysqld: Can't find file: './mysql/db.frm' (errno: 13)
ERROR: 1017 Can't find file: './mysql/db.frm' (errno: 13)
150130 9:40:11 [ERROR] Aborting

150130 9:40:11 [Note] /usr/libexec/mysqld: Shutdown complete


Installation of system tables failed! Examine the logs in
/var/lib/mysql for more information.

The problem could be conflicting information in an external
my.cnf files. You can ignore these by doing:

shell> /scripts/mysql_install_db --defaults-file=~/.my.cnf

You can also try to start the mysqld daemon with:

shell> /usr/libexec/mysqld --skip-grant --general-log &

and use the command line tool /usr/bin/mysql
to connect to the mysql database and look at the grant tables:

shell> /usr/bin/mysql -u root mysql
mysql> show tables

Try 'mysqld --help' if you have problems with paths. Using
--general-log gives you a log in /var/lib/mysql that may be helpful.

The latest information about mysql_install_db is available at
http://kb.askmonty.org/v/installing-...sql_install_db.
MariaDB is hosted on launchpad; You can find the latest source and
email lists at http://launchpad.net/maria

Please check all of the above before mailing us! And remember, if
you do mail us, you should use the /usr/bin/mysqlbug script!
bash-4.2#
"

Hello,
I can't get nfsd start at boot on openwrt linux.

I followed this guide:
http://wiki.openwrt.org/doc/howto/nfs.server

but when I turn the computer on:

Code:

root@OpenWrt:~# showmount -e localhost
clnt_create: RPC: Program not registered

Code:

root@OpenWrt:~# dmesg | tail
[   22.252000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   24.228000] eth1: link UP - 100/full - flow control off
[   24.244000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   30.124000] svc: failed to register nfsdv3 RPC service (errno 5).
[   31.588000] device eth1 entered promiscuous mode
[   31.596000] br-lan: port 1(eth1) entered forwarding state
[   31.600000] br-lan: port 1(eth1) entered forwarding state
[   31.652000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.684000] eth1: link UP - 100/full - flow control off
[   33.604000] br-lan: port 1(eth1) entered forwarding state

but if I do
Code:

root@OpenWrt:~# /etc/init.d/nfsd start
root@OpenWrt:~# showmount -e localhost
Export list for localhost:
/mnt/3tb *

so it works well, but I look at dmesg
Code:

root@OpenWrt:~# dmesg | tail
[   24.228000] eth1: link UP - 100/full - flow control off
[   24.244000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   30.124000] svc: failed to register nfsdv3 RPC service (errno 5).
[   31.588000] device eth1 entered promiscuous mode
[   31.596000] br-lan: port 1(eth1) entered forwarding state
[   31.600000] br-lan: port 1(eth1) entered forwarding state
[   31.652000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.684000] eth1: link UP - 100/full - flow control off
[   33.604000] br-lan: port 1(eth1) entered forwarding state
[16642.280000] svc: failed to register lockdv1 RPC service (errno 124).

I tried several times
Code:

root@OpenWrt:~# /etc/init.d/portmap enable
root@OpenWrt:~# /etc/init.d/nfsd  enable

and reboot but, again, I have to start nfsd manually after every reboot.

What am I doing wrong? On Attitude Adjustment I never had any issue.

Please help!

I am using Fedora 22 (64 bit), My lap is ProBook 4540s

I am trying to configure ZoneMinder but failed to get my webcam woring

When I try below command, I am getting an error

zmu -d /dev/video0 -q -v

Error, failed to enumerate standard 0: Inappropriate ioctl for device

Any idea how to go about this issue

Thanks and Regards

So I'm brand spanking new at this. I'm trying to teach myself about Linux and RPM-based distributions specifically because it's a requirement for a job that I really, really want (very tired of being a barista). Beyond that as someone who primarily uses my computer for gaming, I'm quite satisfied with using Windows 7.

I'm currently attempting, and so far failing, to install OpenMandriva on a completely blank 1TB external HDD. I've finally gotten the install to boot from the DVD disk properly, but now I'm running into this error:

"Partitioning failed: FAT resizing failed: ntfs resize failed: ntfsresize v2014.2.15 (libntfs-3g)
Error: device '/dec/sdd1' is mounted. You must 'unmount' it first."

What I've tried so far is this what this site has provided: http://windows.microsoft.com/en-us/w...#1TC=windows-7

Unfortunately, the same error pops up regardless. What am I missing? Also, pretend that you're trying to explain this to your grandpa. I probably won't understand what you're trying to tell me otherwise. Please help! I'm near the end of my rope over here.

After creating a bootable usb using Universal USB Installer. I booted up the sytstem (Dell Inspiron N4110) F12 boot on usb, did the install, everything went well until after copying files and then the error message that "The grub-pc package failed to install into /target.. So i continued without a boot loader and now am trying to figure out how to get it back.
Previously i did a perfect dual boot of Kali Linux wherein the Grub boot loader was present. I did however uninstall Kali, reclaim HDD space, and even use EasyBCD to remove Grub(i believe).
Also worth noting is that before this dual boot with pignuy and after uninstalling kali linux i did a complete reinstallation of my windows 7 system using the recovery HD.

Now i would like to know how i could get grub boot loader back onto my system so that i can boot up Pinguy OS. Thanks

Hello,
I'm new user of ns-2.I've installed the ns-2.29 and nist-ns-2.29.mob
when i tried to install the patch pmip6-for-ns-2.29-nist.patch.
I had this errors
patching file p1
Hunk #1 FAILED at 124.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 304.
Hunk #2 FAILED at 444.
Hunk #3 FAILED at 514.
Hunk #4 FAILED at 639.
Hunk #5 FAILED at 2746.
Hunk #6 FAILED at 3251.
Hunk #7 FAILED at 3284.
Hunk #8 FAILED at 3848.
8 out of 8 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 922.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
The next patch would create the file p1,
which already exists! Assume -R? [n] y
patching file p1
Hunk #1 FAILED at 1.
File p1 is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 77.
Hunk #2 FAILED at 365.
Hunk #3 FAILED at 542.
3 out of 3 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 228.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 177.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 201.
Hunk #2 FAILED at 324.
2 out of 2 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 38.
Hunk #2 FAILED at 52.
Hunk #3 FAILED at 86.
Hunk #4 FAILED at 852.
Hunk #5 FAILED at 968.
5 out of 5 hunks FAILED -- saving rejects to file p1.rej
patching file p1
Hunk #1 FAILED at 316.
1 out of 1 hunk FAILED -- saving rejects to file p1.rej
Could anyone help me???

Hi im extremely new to theese things and spent all night trying to do this since, my dad wont let me login to the router so i can forward my ps4 ports, since i expereience extreme delay in gameplay about 1/4 of a second, so im trying to use hydra on cygwin so far i gotten to make step, but i keep getting this error code,

gcc -I. -Wall -O2 -o pw-inspector pw-inspector-logo.o pw-inspector.c
gcc: error: pw-inspector-logo.o: No such file or directory
Makefile:61: recipe for target 'pw-inspector' failed
make: [pw-inspector] Error 1 (ignored)
gcc -I. -Wall -O2 -c hydra-vnc.c -DHAVE_MATH_H
gcc: error: spawn: No such file or directory
Makefile:64: recipe for target 'hydra-vnc.o' failed
make: *** [hydra-vnc.o] Error 1

now do i need to download any packages? or another command please help me out im so close but im only learnt this over night! it would be extremely gratefull