Need To Install The N53 PCI Network Card From Asus Without Installing Anything Before

Hi, I am trying to install a smartcard reader driver onto my ubuntu machine. I am not able run the make file.

The output of makefile is as follows:
Code:

amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$ sudo make
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.release ./define.h
make -C /lib/modules/3.16.0-36-generic/build SUBDIRS=/home/amit/Downloads/Linux Driver/rts_pstor modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-36-generic'
arch/x86/Makefile:136: CONFIG_X86_X32 enabled but no binutils support
Makefile:652: Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: -fstack-protector not supported by compiler
make[1]: *** No rule to make target `Driver/rts_pstor'.  Stop.
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-36-generic'
make: *** [default] Error 2
amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$

The make file for this driver is as follows:

Code:

TARGET_MODULE := rts_pstor

EXTRA_CFLAGS := -Idrivers/scsi 

obj-m += $(TARGET_MODULE).o

$(TARGET_MODULE)-objs := rtsx.o rtsx_chip.o rtsx_transport.o rtsx_scsi.o rtsx_card.o \
			 general.o sd.o xd.o ms.o spi.o

default:
	sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
	cp -f ./define.release ./define.h
	make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
debug:
	sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
	cp -f ./define.debug ./define.h
	make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
install:
	cp $(TARGET_MODULE).ko /lib/modules/$(shell uname -r)/kernel/drivers/scsi -f
clean:
	rm -f *.o *.ko
	rm -f $(TARGET_MODULE).mod.c

Please let me know any of your comments.

Thanks,
Amit

Hi ,

I'm new to Linux , I installed Kali linux on my pc and the wifi card isn't working ..

It is a usb wifi card , It has a cd for its driver. There is a folder in the cd called " Linux Driver " and here's what is inside it

First folder :

http://imgur.com/WTNgnEm

Second folder :

http://imgur.com/PyH07Cs

And here it is when I write lsusb :

http://i.imgur.com/NiPbbxSh.jpg

I'd like to know the steps to install it , Thanks in advance ..

OK,

Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...

No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).

Here is the drivers log file:

==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================

I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.

Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?


Thanks in Advance!


JustAnotherHuman

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

hi,

Because i am cross compiling busybox for an arm board and can't install directy busybox on it (it don't have apt-get/sudo/make) i tried to compile busybox with arm-linux-gcc and "make" it in a custom directory with /usr/ /bin/ sbin/ this way i could copy paste the folder and the exe in a clean root and transfert this root to my board.

Sadly i don't seems to be able to change the installation patch.
i tried with :
Code:

make install PREFIX=/home/blabla1/blabla2/blabla3

but when going into the blabla3 folder i find no file (/usr/ /bin/ and /sbin/ are present because i created them myself).

./configure can't be used because the file don't exist.

Any idea on how i could change the installation patch ?

hello! im using linux suse 11, i need to install network drivers hv tried with this command sudo/sbin/insmod -f but it comes out with an error.

new computer from boxes, does not install nvidia driver
Booted from USB then ran YaST, I am new with OpenSuse but have two times before installed OpenSuse on fresh HDD's and Nvidia cards with ease.

The symptoms are like when I switched from a GTX 640 that only has mother board power to the GTX 750 Ti and needed power that I did not connect at first. Until I added extra power to the graphics card I only got a single low res VGA output. This 750 card definitely has power but still can only provide single low res to VGA output.

Terminal (dmesg) ......The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:1380)installed in this system is not supported by the 304.125 NVIDIA Linux driver release. Please see 'Appendix A - supported NVIDIA GPU Products' in this release's README, available on the Linux driver download page at www.nvidia.com. .... None of the VVIDIA graphics adapters were initialized!

Terminal (uname -r) 3.16.7-21 -default [OpenSuse version]

Terminal (/sbin/lspci) VGA Compatible controller: Nvidia Corporation GM107 [GeForce GTX 750 Ti] (rev 02)

have tried:
1. different power cables to graphic card
2. two GTX 750 Ti cards, neither work.
3. re-installed OpenSuse
4. removed card and mother board can run two monitors in high res. DVI cables are new and work. Monitors (4) are all AOC i2367 and working.

5. added to repository 'bumblebee' which contains NVIDIA drivers and tried rebooting. I am not good at repositories yet. However, I didn't need to do this twice before on new installs with NVIDIA cards.

6. downloaded from www.geforce.com file:///home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(1).run but when I run it error, "The file /home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(3).run was opened with UTF-8 encoding but contained invalid characters."It is set to read-only mode, as saving might destroy its content.
Either reopen the file with the correct encoding chosen or enable the read-write mode again in the menu to be able to edit it."

Hardware list: Asus H81M-E motherboard, i5 4460 CPU, 550W power, Asus GeForce GTX 750 Ti graphic card,

Note: two graphic cards on hand, both work in another OpenSuse computer.

I am just learning Linux so I need simple step by step instructions.

Thank you in advance.

Hi everyone, I am a new member and also new to linux, I encountered a problem, but last week I tried but did not solve
I downloaded iso file linux 1.1.0 on page potassium https://www.kali.org, I installed on my Dell inspiron n4010, it works very well and does not have any errors, but after I update and upgrade all packages, I rebooted the system switches to the command line, I lost a lot of time to return to the graphics, but when booting up the network manager icon not seen, I have set the package network-manager-gnome_0.9.4.1-0ubuntu2_i386.deb network manager icon show but when click on the network manager icon only contained text "network manager is not running."
I also installed Wicd but could not run "could not connect to wicd's D-Bus interface. Check the wicd log for error messages."
wireless driver apparently was set before
root@kali:~# airmon-ng
PHY Interface Driver Chipset

phy0 wlan0 wl Broadcom Corporation BCM4313 802.11b/g/n (rev 01)

please help me!
please guide installed offline, my kali linux no internet connection. can download package from another machine to install.

Hi folks,

I'm trying to install the drivers for my "legacy" nvidia graphics card.
I've downloaded the file from nvidia's website to install the driver, but during the process I get this message...

Kernel header file ' /lib/modules/3.13.0-37-generic/build/include/linux/version.h ' does not exist .

The most likely reason is the kernel source files in ' /lib/modules/3.13.0-37-generic/build ' have not been configured.

Anyone know how to configure this file? I've been working on this for a few days now...it's getting old!

Thanks for your help.

Joe

Hi,

I installed ghostscript via yum package manager. Later I wanted a newer version of ghostscript and compiled it from source. "make install" placed the gs executable file under /usr/local/bin/gs. This works if I run the command with absolute path, but if try to run gs, the shell will output

"-bash: /usr/bin/gs: No such file or directory"

if I echo the path variable it will display

/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin

If i run whereis it will give me the correct path
gs: /usr/local/bin/gs

How do I make it work so that typing "gs" will run the executable file from the /usr/local/bin/gs?

(I am using Centos 6)

Thanks.