Home

Linux Stuff
- General Linux Topics Here

Resize LVM Partitions

UPDATED:
I installed a Deb 7 Srv w LVM w following partitions:
The end product should become a mail server (Citadel) and in time also a Web server.
Code:

 df -hT 
Filesystem                Type      Size  Used Avail Use% Mounted on
rootfs                    rootfs    322M  141M  165M  46% /
udev                      devtmpfs   10M     0   10M   0% /dev
tmpfs                     tmpfs     100M  260K  100M   1% /run
/dev/mapper/deb--srv-root ext4      322M  141M  165M  46% /
tmpfs                     tmpfs     5,0M     0  5,0M   0% /run/lock
tmpfs                     tmpfs     200M     0  200M   0% /run/shm
/dev/sda1                 ext2      228M   18M  199M   9% /boot
/dev/mapper/deb--srv-home ext4      233G  188M  221G   1% /home
/dev/mapper/deb--srv-tmp  ext4      368M   11M  339M   3% /tmp
/dev/mapper/deb--srv-usr  ext4      8,3G  481M  7,4G   6% /usr
/dev/mapper/deb--srv-var  ext4      2,8G  236M  2,4G   9% /var

 fdisk -l 
Disk /dev/sda: 268.4 GB, 268435456000 bytes
255 heads, 63 sectors/track, 32635 cylinders, total 524288000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00064033

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      499711      248832   83  Linux
/dev/sda2          501758   524285951   261892097    5  Extended
/dev/sda5          501760   524285951   261892096   8e  Linux LVM

Disk /dev/mapper/deb--srv-root: 348 MB, 348127232 bytes
255 heads, 63 sectors/track, 42 cylinders, total 679936 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-root doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-swap_1: 2143 MB, 2143289344 bytes
255 heads, 63 sectors/track, 260 cylinders, total 4186112 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-swap_1 doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-usr: 8996 MB, 8996782080 bytes
255 heads, 63 sectors/track, 1093 cylinders, total 17571840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-usr doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-var: 2998 MB, 2998927360 bytes
255 heads, 63 sectors/track, 364 cylinders, total 5857280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-var doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-tmp: 398 MB, 398458880 bytes
255 heads, 63 sectors/track, 48 cylinders, total 778240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-tmp doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-home: 253.3 GB, 253289824256 bytes
255 heads, 63 sectors/track, 30794 cylinders, total 494706688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-home doesn't contain a valid partition table

 pvs 
PV         VG      Fmt  Attr PSize   PFree
/dev/sda5  deb-srv lvm2 a--  249,76g    0

 lvs 
LV     VG      Attr     LSize   Pool Origin Data%  Move Log Copy%  Convert
home   deb-srv -wi-ao-- 235,89g
root   deb-srv -wi-ao-- 332,00m
swap_1 deb-srv -wi-ao--   2,00g
tmp    deb-srv -wi-ao-- 380,00m
usr    deb-srv -wi-ao--   8,38g
var    deb-srv -wi-ao--   2,79g

Now i want to _shrink_ the HOME partition so I can expand my VAR partition. Looked for guides but haven't found any site useful so far

I tried to find a way to do it when I installed it but it didn't seem to offer me this at this time even I looked around for a while.

How do I do this shrinking of HOME and extending of VAR partition??
please be fairly specific as Im not a pro yet

Doesn't Contain A Valid Partition Table? Working For Months...

Everything is working great on this server, however I am seeing Disk doesn't contain a valid partition table. I have no issue reading and writing, this something that can be ignored?

Disk /dev/xvda: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders, total 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/xvda1 * 16065 62910539 31447237+ 83 Linux

Disk /dev/xvdf: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdf doesn't contain a valid partition table

Disk /dev/xvdh: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdh doesn't contain a valid partition table

Disk /dev/xvdg: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdg doesn't contain a valid partition table

Disk /dev/xvdi: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdi doesn't contain a valid partition table

Disk /dev/mapper/vgebs-lvebs: 4398.0 GB, 4398029733888 bytes
255 heads, 63 sectors/track, 534696 cylinders, total 8589901824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 2097152 bytes / 4194304 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vgebs-lvebs doesn't contain a valid partition table

Disk /dev/xvdj: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders, total 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdj doesn't contain a valid partition table

Trouble With Fdisk

I got this configuration.

fdisk -l

Disk /dev/sda: 493.9 GB, 493921239040 bytes
255 heads, 63 sectors/track, 60049 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac38

Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 32636 261630976 8e Linux LVM

Disk /dev/mapper/vg_gazduire-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vg_gazduire-lv_swap: 5100 MB, 5100273664 bytes
255 heads, 63 sectors/track, 620 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vg_gazduire-lv_home: 209.1 GB, 209119608832 bytes
255 heads, 63 sectors/track, 25424 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

df -h

Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_gazduire-lv_root
50G 21G 27G 44% /
tmpfs 2.4G 0 2.4G 0% /dev/shm
/dev/sda1 485M 161M 299M 35% /boot
/dev/mapper/vg_gazduire-lv_home
192G 17G 166G 9% /home
/usr/tmpDSK 2.0G 981M 955M 51% /tmp

I want to increase the /dev/sda1 with aproximativ 200 gb who remains ! My plans a i want to make /dev/sda3 and i want to put in
vg_gazduire!

VG Name vg_gazduire
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 249.51 GiB
PE Size 4.00 MiB
Total PE 63874
Alloc PE / Size 63874 / 249.51 GiB
Free PE / Size 0 / 0

When i type fdisk /dev/sda3 the system give me Unable to open /dev/sda3!

Could anyone tell me the solution?

Virtual CentOS 6.4 Server Expand Disk For Splunk Instance

As I'm sure there are other posts for this, I'm terrified to mess with disks in Linux as I'm very green. I've looked at one other post which suggests to run the following so I'm going to do the same. The drive provisioned originally had 400 gb, but currently has 500 gb allocated in vmware. Thanks so much in advance!

Code:

fdisk -l
pvs
vgs
lvs
df -h

Code:

[root@uspk10splunk ~]# fdisk -l

Disk /dev/sda: 8589 MB, 8589934592 bytes
64 heads, 32 sectors/track, 8192 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c255c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           2         501      512000   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             502        8192     7875584   8e  Linux LVM
Partition 2 does not end on cylinder boundary.

Disk /dev/sdb: 536.9 GB, 536870912000 bytes
255 heads, 63 sectors/track, 65270 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x69437664

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       52216   419424988+  8e  Linux LVM

Disk /dev/mapper/vg_uspk10vsp03-lv_root: 3833 MB, 3833593856 bytes
255 heads, 63 sectors/track, 466 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_uspk10vsp03-lv_swap: 4227 MB, 4227858432 bytes
255 heads, 63 sectors/track, 514 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_opt-lv_opt: 429.5 GB, 429488340992 bytes
255 heads, 63 sectors/track, 52215 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Code:

[root@uspk10splunk ~]# pvs
  PV         VG             Fmt  Attr PSize   PFree
  /dev/sda2  vg_uspk10vsp03 lvm2 a--    7.51g    0
  /dev/sdb1  vg_opt         lvm2 a--  399.99g    0

Code:

[root@uspk10splunk ~]# vgs
  VG             #PV #LV #SN Attr   VSize   VFree
  vg_opt           1   1   0 wz--n- 399.99g    0
  vg_uspk10vsp03   1   2   0 wz--n-   7.51g    0

Code:

[root@uspk10splunk ~]# lvs
  LV      VG             Attr      LSize   Pool Origin Data%  Move Log Cpy%Sync                     Convert
  lv_opt  vg_opt         -wi-ao--- 399.99g                                                          
  lv_root vg_uspk10vsp03 -wi-ao---   3.57g                                                          
  lv_swap vg_uspk10vsp03 -wi-ao---   3.94g

Code:

[root@uspk10splunk ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_uspk10vsp03-lv_root
                      3.6G  1.5G  1.9G  45% /
tmpfs                 1.9G     0  1.9G   0% /dev/shm
/dev/mapper/vg_opt-lv_opt
                      394G  374G  422M 100% /opt
/dev/sda1             485M   32M  428M   7% /boot

Trying To Dd A Server With LVM To Another Ext HD, Then To Another Server

I have Linux enterprise server 11 sp3 with 3 250 GB WD blue drives in a raid 5 configuration.

Server �A� (external drive not plugged in):
Code:

Disk /dev/sda: 499.0 GB, 499021512704 bytes
255 heads, 63 sectors/track, 60669 cylinders, total 974651392 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059fd2

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     1028095      513024   83  Linux
/dev/sda2         1028096    21993471    10482688   82  Linux swap / Solaris
/dev/sda3        21993472   974651391   476328960   8e  Linux LVM

Disk /dev/mapper/VG_SYSTEM-ROOT: 487.8 GB, 487755612160 bytes
255 heads, 63 sectors/track, 59299 cylinders, total 952647680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/VG_SYSTEM-ROOT doesn't contain a valid partition table

I am trying to clone this machine to another server, both servers are Dell Poweredge 1900, with 3 � 250 WD drives (the only difference is the �B� server has WD Cavier drives), pretty much identical machines, same processor and ram. I have a 2TB ext hard drive that I am using to store the output of DD. I have booted from the CD to a rescue system, then mounted my 2TB ext and did the following:
Code:

    # dd if=/dev/sda conv=sync,noerror bs=64k | gzip �c | split �a3 �b 2G �verbose - /mnt/exthd/

This gives me the following files on my external hard drive:
Code:

    
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:00 aaa
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:31 aab
-rwxr-xr-x 1 root root 2147483648 Jan 10 21:53 aac
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:05 aad
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:10 aae
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:17 aaf
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:24 aag
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:31 aah
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:37 aai
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:43 aaj
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:50 aak
-rwxr-xr-x 1 root root 2147483648 Jan 10 22:56 aal
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:02 aam
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:06 aan
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:12 aao
-rwxr-xr-x 1 root root 2147483648 Jan 10 23:32 aap
-rwxr-xr-x 1 root root  324998512 Jan 10 23:35 aaq

Now, I boot to the rescue system on server �B� with the external drive plugged in, and run fdisk:
Code:

Disk /dev/sda: 498.8 GB, 498753077248 bytes
255 heads, 63 sectors/track, 60636 cylinders, total 974127104 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00059fd2

   Device Boot      Start         End      Blocks   Id  System

Disk /dev/sdb: 2000.4 GB, 2000398933504 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029167 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00015a3d

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048  3907028991  1953513472    c  W95 FAT32 (LBA)

Notice sda is only 498.8GB where on server �A�, it was 499.0. when I try to restore my files from the DD, I get an out of space error. To restore, I use the following:
Code:

    # cat /mnt/exthd/aa* | gunzip �c | dd of=/dev/sda
    
dd: writing to �/dev/sda�:  No space left on device
974127105+0 records in
974127104+0 records out
498753077248 bytes (499 GB) copied, 37067.3 s, 13.5MB/s

My guess, is that although the drives are the same capacity (3 � 250GB in RAID 5 array), the number of cylinders is different because it is a different model, and that is where it is running out of space, although I wouldn�t think it would.

Please correct me if I am wrong as I am a newbie, but if I do �# dd if=/dev/sda� that will take all the partitions with it? Such as sda1, sda2, sda3 correct?

LVM Mount Via USB

My father passed away about 6 months ago and I'm just getting around to going threw all 18 hard drives... I have been using Ubuntu 14.04 for over a year now and while I'm not a pro I can handle most things.

One drive has LVM on it. I have attached it via a USB2.0 to SATA cable. I followed the instructions he http://linuxers.org/howto/how-mount-...rtitions-linux

Code:

michael [ ~ ]$ sudo fdisk -l
[sudo] password for michael: 

Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x38431b10

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048  1464322047   732160000    7  HPFS/NTFS/exFAT
/dev/sda2      1464322048  2930272255   732975104    7  HPFS/NTFS/exFAT

Disk /dev/sdb: 256.1 GB, 256060514304 bytes
255 heads, 63 sectors/track, 31130 cylinders, total 500118192 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000656a3

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    33560575    16779264   82  Linux swap / Solaris
/dev/sdb2   *    33560576    75505663    20972544   83  Linux
/dev/sdb3        75505664   500117503   212305920   83  Linux

Disk /dev/sdc: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000da346

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *        2048      499711      248832   83  Linux
/dev/sdc2          501758  1465147391   732322817    5  Extended
/dev/sdc5          501760  1465147391   732322816   8e  Linux LVM
michael [ ~ ]$ sudo pvs
  PV         VG         Fmt  Attr PSize   PFree
  /dev/sdc5  ubuntu1-vg lvm2 a--  698.39g    0 
michael [ ~ ]$ sudo lvdisplay /dev/ubuntu1-vg
  --- Logical volume ---
  LV Path                /dev/ubuntu1-vg/root
  LV Name                root
  VG Name                ubuntu1-vg
  LV UUID                StErnb-Mtop-NaEy-faw4-wNk0-bY5I-6ARBmI
  LV Write Access        read/write
  LV Creation host, time ubuntu1, 2014-08-12 18:45:21 +0900
  LV Status              NOT available
  LV Size                694.39 GiB
  Current LE             177765
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
   
  --- Logical volume ---
  LV Path                /dev/ubuntu1-vg/swap_1
  LV Name                swap_1
  VG Name                ubuntu1-vg
  LV UUID                62DxMC-qLAo-6cU9-kA5H-kNoL-7B4t-1ZCQcK
  LV Write Access        read/write
  LV Creation host, time ubuntu1, 2014-08-12 18:45:21 +0900
  LV Status              NOT available
  LV Size                4.00 GiB
  Current LE             1024
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
   
michael [ ~ ]$ mount /dev/ubuntu1-vg/root /mnt
mount: only root can do that
michael [ ~ ]$ sudo mount /dev/ubuntu1-vg/root /mnt
mount: special device /dev/ubuntu1-vg/root does not exist

So where did I go wrong?

Knoppix Cant See Hard Drvie From Gui

Im experimenting. I loaded knoppix, my older version on cd used to work great but I suppose the 2005 cd just met its end of life. The machine Im on boots fine to Windows I just want to play around with Knoppix.

Anyway, I downloaded burned and loaded KNoppix 7.4. Im on it as I type.

pix@Microknoppix:/dev$ cat /proc/partitions
major minor #blocks name

240 0 10608000 cloop0
252 0 2115392 zram0
8 0 244198584 sda
8 1 1536000 sda1
8 2 233490432 sda2
8 3 9170944 sda3
11 0 4182848 sr0

and

knoppix@Microknoppix:~$ fdisk -l

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x17807de0

Device Boot Start End Blocks Id System
/dev/sda1 2048 3074047 1536000 27 Hidden NTFS WinRE
/dev/sda2 * 3074048 470054911 233490432 7 HPFS/NTFS/exFAT
/dev/sda3 470054912 488396799 9170944 17 Hidden HPFS/NTFS

That crusty old version of KNoppix .. I think 5.x era showed a hda1 or sda1 on the desktop. I could just navigate that through the windows files.

So I guess Im asking... how do I get the harddrive to show up in the gui .. or how do I unhide the drives ?

UEFI Vs Debian - Cannot Boot Into Grub After Installation

The installation of the latest stable on my Lenovo G505s went just fine in UEFI mode but when the installation finished I never reach grub during the bootup process. I put Refind media onto a usb stick and boot into my computer using it after that I tried to follow this guide https://wiki.debian.org/GrubEFIReinstall but I'm having some trouble.

When I start the computer with the "Refind media" it gives me 3 options where the first is

"Boot EFI\debian\grubx64.efi from 510 Mib Fat Volume" If I choose this option it takes me to grub via eufi(?) and then I can get into my computer as usual.

How can I make my computer understand that it should recognize and boot from EFI\debian\grubx64.efi, 510 Mib Fat Volume?

I found https://wiki.debian.org/EFIStub and since my
/boot/efi/EFI/debian looks like; grubx64.efi initrd.img-3.16.0-4-amd64 vmlinuz-3.16.0-4-amd64
I tried the following
Code:

# efibootmgr -c -g -L "Debian (EFI stub)" -l '\EFI\debian\grubx64.efi' -u 'root=UUID=$UUID ro quiet rootfstype=ext4 add_efi_memmap initrd=\\EFI\\debian\\initrd.img-3.16.0-4-amd-64'
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory

Code:

    [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
    EFI boot on HDD


     apt-get install --reinstall grub-efi

went just fine and I have /dev/sda1 mounted on /boot/efi
but when I try grub-install I get

Code:

grub-install /dev/sda
Installing for x86_64-efi platform.
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory
Installation finished. No error reported.

What is going wrong here?

Code:

    update-grub
    Generating grub configuration file ...
    Found background image: .background_cache.png
    Found linux image: /boot/vmlinuz-3.16.0-4-amd64
    Found initrd image: /boot/initrd.img-3.16.0-4-amd64
    Adding boot menu entry for EFI firmware configuration
    done

Code:

file /boot/efi/EFI/debian/grubx64.efi
/boot/efi/EFI/debian/grubx64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows

but efibootmgr --verbose | grep debian gives me nothing. If I run efibootmgr without grep I get:

Code:

    efibootmgr --verbose
    BootCurrent: 0002
    Timeout: 0 seconds
    BootOrder: 2001,0003,0004,0001,0000,2002,2003
    Boot0000* USB HDD     : SanDisk U3 Cruzer Micro    BIOS(2,500,00)..................3.......1...5........................................
    Boot0001* USB ODD     : SanDisk U3 Cruzer Micro    BIOS(3,500,00)..................;.......9...=........................................
    Boot0002* EFI USB Device   ACPI(a0341d0,0)PCI(10,0)USB(2,0)0311050000HD(1,800,2d5f,55fc859c-5227-4cd5-bd64-a4fd678ba8b6)RC
    Boot0003* SATA HDD    : ST1000LM014-1EJ164                         BIOS(2,0,00).......................................................................
    Boot0004* SATA ODD    : MATSHITADVD-RAM UJ8C2                      BIOS(3,0,00).......................................................................
    Boot2001* EFI USB Device   RC
    Boot2002* EFI DVD/CDROM   RC
    Boot2003* EFI Network   RC

Here is some additonial information which might be relevant.

Code:

    # df -h
    Filesystem                 Size  Used Avail Use% Mounted on
    /dev/dm-1                  9.1G  2.5G  6.2G  29% /
    udev                        10M     0   10M   0% /dev
    tmpfs                      1.4G  9.1M  1.4G   1% /run
    tmpfs                      3.5G   68K  3.5G   1% /dev/shm
    tmpfs                      5.0M  4.0K  5.0M   1% /run/lock
    tmpfs                      3.5G     0  3.5G   0% /sys/fs/cgroup
    /dev/sda2                  237M   35M  190M  16% /boot
    /dev/sda1                  511M  132K  511M   1% /boot/efi
    /dev/mapper/ludo--vg-home  893G  103M  848G   1% /home
    tmpfs                      713M  4.0K  713M   1% /run/user/117
    tmpfs                      713M  8.0K  713M   1% /run/user/1000

Code:

fdisk -l

Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0080BBEA-1B46-4EAE-9471-CC523BFCAD44

Device       Start        End    Sectors   Size Type
/dev/sda1     2048    1050623    1048576   512M EFI System
/dev/sda2  1050624    1550335     499712   244M Linux filesystem
/dev/sda3  1550336 1953523711 1951973376 930.8G Linux filesystem

GPT PMBR size mismatch (13695 != 2009726) will be corrected by w(rite).

Disk /dev/sdb: 981.3 MiB, 1028980224 bytes, 2009727 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: E4A93BB9-2F9C-4487-B090-91B620879E4C

Device     Start   End Sectors  Size Type
/dev/sdb1   2048 13662   11615  5.7M EFI System

Disk /dev/mapper/sda3_crypt: 930.8 GiB, 999408271360 bytes, 1951969280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-root: 9.3 GiB, 9999220736 bytes, 19529728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-swap_1: 14.4 GiB, 15439233024 bytes, 30154752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/mapper/ludo--vg-home: 907.1 GiB, 973967720448 bytes, 1902280704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Extended Partition Error On Boot

Did you find any way to get out with this error ? I've got the same with an extended partition...
Code:

# fdisk /dev/sda

Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Command (m for help): p
Disk /dev/sda: 55,9 GiB, 60022480896 bytes, 117231408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00015c35

Device     Boot    Start       End  Sectors  Size Id Type
/dev/sda1  *        2048  19531775 19529728  9,3G 83 Linux
/dev/sda2       19533822 117229567 97695746 46,6G  5 Extended
/dev/sda5       19533824  23558143  4024320  1,9G 82 Linux swap / Solaris
/dev/sda6       23560192 117229567 93669376 44,7G 83 Linux

Code:

# dmesg|less
[   84.343741] EXT4-fs (sda2): unable to read superblock
[   84.348074] EXT4-fs (sda2): unable to read superblock
[   84.352391] EXT4-fs (sda2): unable to read superblock
[   84.357159] XFS (sda2): Invalid superblock magic number
[   84.373676] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   84.373891] FAT-fs (sda2): bogus logical sector size 65535
[   84.373897] FAT-fs (sda2): Can't find a valid FAT filesystem
[   84.378220] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   84.378444] FAT-fs (sda2): bogus logical sector size 65535
[   84.378449] FAT-fs (sda2): Can't find a valid FAT filesystem
[   84.386262] ntfs: (device sda2): is_boot_sector_ntfs(): Invalid boot sector checksum.
[   84.386270] ntfs: (device sda2): read_ntfs_boot_sector(): Primary boot sector is invalid.
[   84.386275] ntfs: (device sda2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[   84.386279] ntfs: (device sda2): ntfs_fill_super(): Not an NTFS volume.
[   84.390737] MINIX-fs: unable to read superblock
[   84.395176] attempt to access beyond end of device
[   84.395185] sda2: rw=16, want=3, limit=2
[   84.395191] hfsplus: unable to find HFS+ superblock
[   84.404204] qnx4: no qnx4 filesystem (no root dir).
[   84.408959] You didn't specify the type of your ufs filesystem

mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[   84.417367] hfs: can't find a HFS filesystem on dev sda2

Incorrect Disk Space Of External Disk

I have an external disk connected to a raspberry pi to act as a nas, which I am accessing from a linux mint desktop machine.
The nas disk is 30GB, but according to my desktop machine, which connects through the file browser via samba, only around 318MB are reported as available.
If I try to copy a 400MB file it tells me there is insufficient space.
The disk is currently empty, so all 30GB should be available.

On the nas box, cfdisk seems to report the disk size and the partition size correctly:
Code:

                          cfdisk (util-linux 2.20.1)

                              Disk Drive: /dev/sda
                        Size: 30016659456 bytes, 30.0 GB
              Heads: 64   Sectors per Track: 32   Cylinders: 28626

    Name        Flags      Part Type  FS Type          [Label]        Size (MB)
 ------------------------------------------------------------------------------
    sda1        Boot        Primary   ext4                             30016.66*

I'm not sure where to look next.

Partition Using Fdisk Gone Wrong.

Code:

Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 60801 cylinders
Units = cylinders of 16065 * 512 bytes

   Device Flag    Start       End    Blocks   Id  System
/dev/sda1             0     60795 488335837+  83  Linux native
/dev/sda2  u      60795     60801     48195   82  Linux swap
/dev/sda3             0     60801 488384032+   5  Whole disk

Actually i created 100 mb lvm partition using fdisk but after checking in fdisk, i am getting this. I don't know next time my system will boot or not.

What should i do in this situation to recover from this situation?

I am using centos6 x64.

Resize LVM Partitions

Similar Content