SSH And Opening Ports

This is a copy of my /etc/sysconfig/iptables.conf (w/o comments):
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A FORWARD -j REJECT --reject-with icmp-host-prohibited
COMMIT

- Added the port 80/21 entries.
vsftpd does work.

"iptables-save | grep 80" returns nothing.

My web server works (internal and external).

"systemctl is-active iptables" shows "inactive"
I have "just" gotten firewalld up and running thanks to questions answered here.

iptables is truly a mystery to me.

Can someone explain why my web server/vsftpd are up and working w/o iptables being active? How can I get my network and security both up and working safely together?

If I enable/activate iptables, is this going to break my web server?

Is this the appropriate forum for this question?

As always, thank you for your time and patience,

Skip

Hello! I hope this post get's in the right place, cause I'm a newbie @ Linux

I'm trying to set up a Webserver, apache. And I'm confused which chain to set in IPTables. I hope'd someone could answer me a little more in detail, I've tryed googeling, but the answers were quite confusing for me, anyway here are the statement;

-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT

and

-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT

A know that that -A INPUT is for incoming packaes, -p specifies protocol TCP. But I'm unsure what -m does? Cause in the first line it is just "-m tcp" and in the second it is "-m state --state". So if someone could explant the diffrence and which one to use, I would be grateful.

And another question while I'm at it; In the start of IPTables I have;
-A INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT

What happens if I get a packet destined for some service, that isn't a chain in IPTables? Take port 80 for example, will IPTables accept the packet, but drop it at the end because there isn't any hit? If you understand what I mean. If -A INPUT would be DENY istead of ACCEPT, would the packet never ever get examined further then the first line?

Almost and the bottom of IPTables ther is a line;
-A INPUT -j REJECT --reject-with icmp-host-prohibited

Is it the chain that will be matched if there is not hit prior to it? What would happen if this line wasn't there?

Thank you very much for your help, I'm just wanna be sure little how IPTables work.

Best Regards; Stefan

I recently changed from Debian 7 to 8 which now uses systemd as the default init.
I had a init file that worked fine (see below) and works fine when directly invoked
Code:

$ sudo /etc/init.d/iptables start

however fails when indirectly invoked
Code:

$ sudo service iptables start
Job for iptables.service failed. See 'systemctl status iptables.service' and 'journalctl -xn' for details.

Code:

$ systemctl status iptables.service
 iptables.service - LSB: Iptable setup
   Loaded: loaded (/etc/init.d/iptables)
   Active: failed (Result: exit-code) since Mon 2015-05-25 17:18:37 PDT; 5s ago
  Process: 4825 ExecStart=/etc/init.d/iptables start (code=exited, status=203/EXEC)

Code:

$ journalctl -xn
No journal files were found.

I don't understand the error except that it "failed" and is loaded.
I have disabled and re-enabled the service with these commands:

Code:

sudo systemctl disable iptables
sudo systemctl enable iptables

which completes successfully but did not fix the problem.


INIT file
Code:

### BEGIN INIT INFO
# Provides:          iptables
# Required-Start:    $network $remote_fs $syslog
# Required-Stop:     $network $remote_fs $syslog
# Should-Start:      $portmap
# Should-Stop:       $portmap
# X-Start-Befo     nis
# X-Stop-After:      nis
# Default-Start:     2 
# Default-Stop:      1
# X-Interactive:     false
# Short-Description: Iptable setup
# Description:       Sets iptable rules
#                    
### END INIT INFO

ipt=/sbin/iptables

loadrules() {

if [ -e /etc/iptables_ruleset ]; then iptables-restore < /etc/iptables_ruleset && exit 0; fi

$ipt -F
$ipt -X

# Policies and Chains
$ipt -P INPUT DROP
$ipt -P FORWARD DROP
$ipt -P OUTPUT ACCEPT
$ipt -N SSH
$ipt -N WEBSERVER

$ipt -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
$ipt -A INPUT -i lo -j ACCEPT # Allow loopback

# Services
$ipt -A INPUT -p tcp -m multiport --dport 443,80 -j WEBSERVER # WEBSERVER chain 
$ipt -A INPUT -p tcp --dport 22 -m conntrack --ctstate NEW -j SSH # Jump to SSH chain
$ipt -A INPUT -p tcp -s 192.168.1.1/24 --dport 445 -j ACCEPT # samba

# Reject message for LAN
$ipt -A INPUT -s 192.168.1.1/24 -j REJECT

# WEBSERVER chain
$ipt -A WEBSERVER -p tcp -m multiport --dport 443,80 -m conntrack --ctstate NEW -j LOG
$ipt -A WEBSERVER -p tcp -m multiport --dport 443,80 -j ACCEPT

# SSH chain
$ipt -A SSH -p tcp --dport 22 -m recent --set --name SSH # Set SSH recent
$ipt -A SSH -p tcp --dport 22 -m recent --name SSH --update --seconds 10 --hitcount 2 --rttl -j LOG # Log if over counter
$ipt -A SSH -p tcp --dport 22 -s 192.168.1.1/24 -m recent --name SSH --update --seconds 10 --hitcount 10 --rttl -j REJECT # Reject from lan if over counter
$ipt -A SSH -p tcp --dport 22 ! -s 192.168.1.1/24 -m recent --name SSH --update --seconds 10 --hitcount 2 --rttl -j DROP # Drop if over counter
$ipt -A SSH -p tcp --dport 22 -j ACCEPT

iptables-save > /etc/iptables_ruleset
}

removerules() {
$ipt -P INPUT ACCEPT
$ipt -P FORWARD ACCEPT
$ipt -P OUTPUT ACCEPT
$ipt -F
$ipt -X
}

restartrules() {
rm /etc/iptables_ruleset
loadrules
}

case "$1" in
	start)
		loadrules
		;;
	stop)
		removerules
		;;
        restart)
                restartrules
                ;;
    	*)
        	echo "Usage: $0 start|stop|restart" >&2
        	exit 3
        	;;
esac

Edit:
Checking /var/log/daemon.log gives me this info:
Code:

May 25 19:13:29 hostname systemd[6004]: Failed at step EXEC spawning /etc/init.d/iptables: Exec format error
May 25 19:13:29 hostname systemd[1]: iptables.service: control process exited, code=exited status=203
May 25 19:13:29 hostname systemd[1]: Failed to start LSB: Iptable setup.
May 25 19:13:29 hostname systemd[1]: Unit iptables.service entered failed state.

Hi everyone
I have a question about iptables

This line
Code:

iptables -A INPUT -p tcp  -m tcp --dport 80 -j ACCEPT

why there is a "-m tcp"? what does this mean? I checked some book and man, I did not find what does this mean.

Thank you very much for your help.

Hi all,
I am brand new to Linux, playing around a bit with different things to see how I can use it in the future. Here is my problem:

I have written a simple program in Ada that works well on windows. It opens a TCP port (20000) and listens for incoming connections. I tried it on my internal network and it works well. I can connect from other windows machines and even from my Linux machine.

Now I moved the program to Linux and compiled it there. It starts ok and then listens for the connections. I can connect to it from that same Linux machine but not from any other machine on my network.

I checked the firewall status on Linux with ufw status and it is disabled. I also tried to add a rule to the iptables with
iptables -A INPUT -p tcp --dport 20000 -j ACCEPT

but still nothing. I can not connect from another machine on my network. I also tried to open a simple telnet connection from a windows machine and that too is blocked. I thought without the firewall all incoming connections would be allowed but obviously something is not working as I thought.

Any help would be greatly appreciated

Dear all,

This is my current iptables (with default policy = Accept) and no rules.
Code:

[root@racnode1 ~]# iptables -L -v
Chain INPUT (policy ACCEPT 77072 packets, 7890K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 70306 packets, 129M bytes)
 pkts bytes target     prot opt in     out     source               destination         
[root@racnode1 ~]#

I have decided to allow only incoming network connection from my own subnet and hence

Code:

[root@racnode1 ~]# iptables -A INPUT -s 192.168.0.0/24 -j ACCEPT
[root@racnode1 ~]# iptables -L -v
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
  178  9055 ACCEPT     all  --  any    any     192.168.0.0/24       anywhere            

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 186 packets, 316K bytes)
 pkts bytes target     prot opt in     out     source               destination         
[root@racnode1 ~]#

Noted that my default policy is still ACCEPT, hence I

Code:

[root@racnode1 ~]# iptables --policy INPUT DROP

===============================================================

Upon this, I have 2 issues

a) my iptables -L -v command can't display fully, i am stuck at below

Quote:
[root@racnode1 ~]# iptables -L -v
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
b) my ssh login is very slow

Quote:
login as: root
-- waited quite sometime before prompting me for password
===============================================================

If i removed revert the INPUT policy to ACCEPT, then everything will be fine as normal.

Why ?

Thanks and look forward to your advises.

Regards,
Noob ;(

I was reading the frozentux appendix for dhcp (https://www.frozentux.net/iptables-t...tml/x6316.html) and I was wondering how could this Code:

$IPTABLES  -I INPUT -i $LAN_IFACE -p udp --dport 67:68 --sport 67:68 -j ACCEPT

be made to be more restrictive? The author himself says that this ca be done, but doesn't give any details in this respect.

I am interested in both cases - if the computer is a dhcp server or if it is only a dhcp client. Can you help me out with this?

I am trying to set up a "Proxy Server" in Linux, without using Squid (Part of my project). However I have beginner's knowledge of iptables. I am using the following script from "http://www.aboutdebian.com/proxy.

#!/bin/sh
INTIF="eth1"
EXTIF="eth0"
EXTIP="`/sbin/ifconfig eth0 | grep 'inet addr' | awk '{print $2}' | sed -e 's/.*://'`"
/sbin/depmod -a
/sbin/modprobe ip_tables
/sbin/modprobe ip_conntrack
/sbin/modprobe ip_conntrack_ftp
/sbin/modprobe ip_conntrack_irc
/sbin/modprobe iptable_nat
/sbin/modprobe ip_nat_ftp
echo "1" > /proc/sys/net/ipv4/ip_forward
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
iptables -P INPUT ACCEPT
iptables -F INPUT
iptables -P OUTPUT ACCEPT
iptables -F OUTPUT
iptables -P FORWARD DROP
iptables -F FORWARD
iptables -t nat -F
iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT
iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE

Question is there is no packet forwarding from eth1 to eth0 (verified from wireshark, a windows is using eth1's ip address as its default gateway)

Any help would be highly appreciated!

Hello

I have problem with creating pptp connection on my centos vps.
VPS is under OpenVZ, so in customer panel i enabled TUN/TAP, PPP and IPSEC.

On my centos 6.5 vps i made changes based on this tutorial
http://www.zedt.eu/tech/linux/settin...os-openvz-vps/

and on windows 7 this
http://www.howtogeek.com/51237/setti...ver-on-debian/

And now, windows 7 is giving me 807 error.

Is this iptables rules are correct ?
Code:

iptables -A INPUT -i venet0 -p tcp --dport 1723 -j ACCEPT
iptables -A INPUT -i venet0 -p gre -j ACCEPT
iptables -t nat -A POSTROUTING -j SNAT --to-source [VPS's IP]
iptables -A FORWARD -i ppp0 -o venet0 -j ACCEPT
iptables -A FORWARD -i venet0 -o ppp0 -j ACCEPT

I have no ppp0 interface, and i have additionally vnet0:0 with external ip, and gre0 and gretap0 interfaces.

So ifconfig -a shows:
Code:

[root@vps ~]# ifconfig -a
gretap0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          BROADCAST MULTICAST  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

gre0      Link encap:UNSPEC  HWaddr 00-00-00-00-FF-FF-80-4B-00-00-00-00-00-00-00-00  
          NOARP  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          inet6 addr: 2602:ffc5::ffc5:6f61/128 Scope:Global
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:101201 errors:0 dropped:0 overruns:0 frame:0
          TX packets:42319 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:131220862 (125.1 MiB)  TX bytes:4717867 (4.4 MiB)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:x.x.x.x  P-t-P:x.x.x.x  Bcast:x.x.x.x
Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

So is vnet0 should be vnet0:0 ?
And what should be instead of ppp0 interface ?

Hi,

So, I am learning meteor.js and signed up for a (cheap, i.e no support) VPS to host my Meteor app. Everything is running fine but I am trying to understand better how Linux works so here is my question:

I am running CentOS 7 on the VPS but it still uses iptables for its firewall.

I had to enable port 80 to access the web server. However, if I reboot the server, it stops working until I do
Code:

iptables -F

Then everything works. But I am thinking that -F might not be the best thing. I have changed the default SSH port from 22 to something else and that also works but I don't think I ever added it to the iptables rules.

If I do a port scan, the new SSH port is indicated as open as well as port 80 but others are closed as they are supposed to be.

Any idea what is doing on behind the scenes that requires iptables -F for the web access to work properly and if I shouldn't be doing iptables -F (I have it in the rc.local file), what is the right way of doing it?

(BTW, I am computer literate but not that familiar with Linux, which I am trying to learn now.)


Kamal