How To Patch OSPF In Ns2.34

Hi Everyone
i m working on ns2.35 ubuntu 12.04
when i follow these steps for olsr patching
all commands ran without error

cd ns-allinone-2.35/ns-2.35/
tar zxvf um-olsr-1.0.tgz
ln -s ./um-olsr-1.0 ./um-olsr
patch -p1 < um-olsr/um-olsr_ns-2.35_v1.0.patch

but while running the olsr.tcl
it again shows the same error
invalid command name "Agent/OLSR"
while executing
"Agent/OLSR set use_mac_ true"
(file "olsr.tcl" line 38)
please help me , thnx in advance

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html


After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:

g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:

bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.


Do you have any ideia how to correct this?

Thank you in advance.

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.


(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

hello
i installed sumo-0.9.8 and ns-2.35 in fedora 15. i want to use TraNS.
i know that TraNS no need to install. but it needs to be configured for using ns-2.
when i use the command patch -p0 < traci.patch
the error is appeared
Quote:
[root@Fedora-15 ns-allinone-2.35]# patch -p0 < traci.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** Makefile.in.2.29 2005-10-20 06:45:22.000000000 +0200
|--- Makefile.in 2007-09-11 13:46:57.000000000 +0200
--------------------------
File to patch: traci.patch
patching file traci.patch
Hunk #1 FAILED at 85.
Hunk #2 succeeded at 90 with fuzz 2 (offset -1 lines).
Hunk #3 succeeded at 152 with fuzz 2 (offset -2 lines).
Hunk #4 succeeded at 318 with fuzz 2 (offset -3 lines).
Hunk #5 FAILED at 345.
2 out of 5 hunks FAILED -- saving rejects to file traci.patch.rej
can't find file to patch at input line 74
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** common/mobilenode.h.2.31 2007-09-20 13:13:18.000000000 +0200
|--- common/mobilenode.h 2007-09-20 13:13:59.000000000 +0200
--------------------------
and when i use the command patch traci.patch
it needs too time to patch .(the traci.patch is 3kB).
what's the matter?

thanks

Hi , i desinstall ns2.34 and i want to reinstall again so i was follow your step
$ tar xvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34/
$ patch -p0 < lwx+LTE+dccp+MPTCP.patch
$ export CC=gcc41 CXX=g++41 && ./install

and with this patch i add another patch for wimax "wimax-awg26_ns235.patch"

but when i install ns2.34 this erreur was showen
common/packet.h: In static member function ‘static void p_info::initName()’:
common/packet.h:402: error: ‘PT_WIMAXBS’ was not declared in this scope
make: *** [common/scheduler.o] Error 1
Ns make failed!

can you tell me where is the problem ???

I m learning Tcl and write short code. After running code i got same error repeatedly and not able to find mistake,,,i wrote it as it is from a tutorial. here is the code below

set ns [new Simulator]

set f1 [open out.nam w] #open nam file out.nam
$ns namtrace-all $f1

proc finish{} {
global ns f1
$ns flush-trace
#close $tracefile1
close $f1
exec nam out.nam &
exit 0
}


set n1 [$ns node] # 3 nodes defined
set n2 [$ns node]
set n3 [$ns node]

set duplex-link $n1 $n2 10mb 10ms Droptail
set duplex-link $n2 $n3 10mb 10ms DropTail
set duplex-link $n3 $n1 10mb 10ms DropTail

set udp1 [new Agent/UDP] #UDP agent attached to node n1
$ns attach-agent $n1 $udp1

set cbr1 [new Application/traffic/CBR]
$cbr1 set packetSize_ 500
$cbr1 set interval_ 0.005
$ns attach-agent cbr1 udp1

set null1 [new Aggent/Null]
$ns attach-agent $n2 $null1


$ns connect $udp1 $null1

$ns at 0.5 "$cbr0 start"
$ns at 4.5 "$cbr0 stop"


$ns at 12.0 "finish"

$ns run



ERROR:wrong # args: should be "set varName ?newValue?"
while executing
"set f1 [open out.nam w] #open nam file out.nam"
(file "11.tcl" line 19)

I found that the mobiwan patch file only for ns-2.33.

If I want to run the mobiwan in NS-2.31 , anyone can provide the mobiwan patch file that can run in NS-2.31 ? In the same time , can provide me the method to install it in NS-2.31 ?

I will be really please if you can help me in this problem. Your reply will be really appreciated.

Thank you very much in advance.

Hi all,

i have installed ns-2.33 and also i have ns2.31_fhmip.patch.gz. How to patch ns2.31_fhmip.patch in ns-allinone-2.33/ns-2.33

when i tried to untar
it gave me error
PHP Code:
chase@chase-desktop:~/ns-allinone-2.33/ns-2.33$ tar -zxvf ns2.31_fhmip.patch.gz 
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors 



Thanks & Regards

Pon

Hi,
I have patched GPSR to ns-2.35 using keliu' code. It works fine with given tcl file. I need to move nodes according to mine own mobility scenario and compare them to AODV protocol.
I have two problems
1. I don't understand what this command in gpsr.tcl file means Code:

proc gpsr-create-mobile-node { id args } {
         .........................	
if [info exists opt(energy)] {
	$node addenergymodel [new $opt(energy) $node 10 0.5 0.2]}
         .............

What are these figures (0.5, 0.2), are these energy consumed in reception and transmission or some thing else.

Secondly I want move mobile node created using proc defined in gpsr.tcl file according to my own mobility plan e.g. Code:

 $ns_ at 0.000000000000 "$node_(0) setdest 144.816950690450 20.073824649527 0.324133202939"
$ns_ at 0.000000000000 "$node_(1) setdest 93.957720171475 192.140808646867 1.452613500562"
$ns_ at 12.158688172971 "$node_(23) setdest 113.137798368154 39.443538618334 0.902003496971"
$ns_ at 14.805074599534 "$node_(2) setdest 152.227654369397 20.766089279052 1.742469780423"

But when I run simulation it gives error like this:[QUOTE]Load complete...
Starting Simulation...
ns: _o18 setdest 144.816950690450 20.073824649527 0.324133202939:
(_o18 cmd line 1)
invoked from within
"_o18 cmd setdest 144.816950690450 20.073824649527 0.324133202939"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o18" line 2)
(SplitObject unknown line 2)
invoked from within
"_o18 setdest 144.816950690450 20.073824649527 0.324133202939"
[\QUOTE]
Urgent help is needed please