Tumbler Crash

Running Xubuntu 14.10 (and out of patience). Got a Nikon Coolpix L15 and hooked it up to my Dell Optiplex 170L via a USB cord. The camera icon pops up. I double click on it and get to the photos, but then the whole thing starts bogging down and I can't copy the photos and something crashes. (Not the whole computer.) I'll attach the report. (It's in two screenshots because it didn't fit in one.)

And when it bogged it also gave me an error message window with 'One or more applications are keeping the volume busy. (PID-0)'

And I thought it was kind of treating the camera as a usb drive. When I hovered the cursor over the camera icon it showed:

'Mounted in "gphoto2://[usb:004,002]/"

and it showed:

0 bytes left (0 bytes total)

And there was four photos and a video on the camera.

I checked and was able to download the photos and video on a Windows computer, so I don't think the issue is with the camera or the files.

Because of the 'volume busy' error message I closed out everything on the computer and was still getting the same messages when I tried to transfer.

It seems close to doing it. I can highlight a photo but then it all bogs down and crashes.

Hi, i am newbie. I have problems to transfer files between Linux to Windows. Here goes mi situation.

I have already install pscp in windows, i tested it typing pscp in command line, its ok. I have read that pscp is primordial to perform the transfers.

The problem is the next: i am located in /root, trying to transfer install.log to c:\temp, doing the next: pscp.exe root@192.168.x.x: /root/install.log c:\temp
and the result is:
-bash: pscp.exe: command not found

I am searching in the internet for a solution but with no success yet. Could you help me please?

Hi,

I have a target board running embedded Linux, and a host PC that runs Ubuntu. I want to be able to transfer files from the host PC to the target board through serial interface, (something like I have a terminal program on the host side that talks to the target, and I issue some command from the terminal to transfer a file to the target, the target receive the file and store it in some RAM location for later), How can I do it?
I know how to do this using ymodem on the host terminal and loady on target's u-boot command prompt, but how can I do it when target is running Linux?

Thank you all,
Wei

I am working on LAR protocol, ns2 version = 2.32
OS = ubuntu 12.04

i successfully installed LAR NS on my system . but nam does not qork with ns-2.32 . so i tried to install with the following command

sudo make install nam ===> it successfully installed namv1.15 . but when i run box.tcl it is giving me the following error

SORTING LISTS ...DONE!
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 220.0
Segmentation fault (core dumped)

then i tried to remove the nam with this command sudo apt-get remove nam ==> removed
then i installed this nam from (nam_1.14_amd64.deb) . when i write nam it shows me network animator window v1.14 but segmentataion fault error remains the same .

I also tried to install nam-1.14.i586.tar.gz , first untar it and then the following command sudo cp nam /usr/local/bin but still the error .
i also tried with nam-1.14-x86_64.tar.gz but still no success.

if i dont use nam , then my box file runs successfully.
plz suggest me how to rectify this error.

I am reading a gnuplot pdf FAQ. In section 3.13 it says: "This requires you to write contours into a temporary file using the table terminal." Then I google and all I get is terminal-table. It says: install terminal-table by applying this command:

Quote:
$ sudo gem install terminal-table
What is it all about? What is a table terminal? What is a terminal-table? It looks like terminal table is to print tables in a terminal, right?

Thanks, - A.

I try to install ubuntu 9 on woindows 7.The ubuntu is working quite fine.I try to see where my bin files are located.Its in folder FILE SYSTEM.
My commands ip addr,ls are working.

The command sudo cd/usr/bin is not working.

Please let me know where problem is.

I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....

When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.

Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.

I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.

Thank you in advance for reading through this and for any help offered.....

Mikey

Hi all,
i am new to linux, i am using Centos 6. There is some problem in the network settings as i am able to browse internet from a browser but when i am trying to use the terminal (using ping command) for any of the website (say www.google.com) nothing is happening. suppose i want to install some software (like hdf5), when i am using "sudo yum install hdf5" it shows large number of error massages like "error could not connect to the host". It would be a great help if someone provide the solution.
Thanks in advance.

Durgesh

Hey guys. So I just went out and bought a Sager 8268-s (clevo p150sm-a) With an i7 4910mq and a Nvidia 980m gt. As I am a computer tech by trade, every time i see Windows i get horrible PTSD so i decided to try Linux instead. After many hours of trying to get a dual boot working finally got Linux Mint 17 Cinnamon installed on my computer, but when I went to install the Nvidia driver it landed me in fallback mode which I could not escape. So then I tried Ubuntu 14.04 LTS thinking maybe Mint was incompatible with the driver and the same thing happened.

So here is my method:

(sorry i don't know how to make a code box :/ )

First I log in to get root access:

$ su

Then I Update the xorg:

$ sudo apt-add-repository ppa:xorg-edgers/ppa

Then update my system:

$ sudo apt-get update && sudo apt-get dist-upgrade

Then i go into Virtual terminal (Ctrl+Alt+F1) and disable the display manager:

$ sudo service mdm (or lightdm for Ubuntu) stop

Then i install the drivers which i have done multiple ways:

$ sudo apt-get install nvidia-current nvidia-settings

or

$ sudo apt-get install nvidia-343 nvidia-settings

or by downloading the driver from Nvidia (first designating the file as executable)

$ sudo sh nvidia.run && sudo apt-get install nvidia-settings

Then after install, I create the config file:

$ sudo nvidia-xconfig

Then I reboot. After I get the low res mode in Ubuntu or fallback mode in Mint and Driver manager doesn't detect any proprietary drivers and I have to reinstall to get the OS working again. Any suggestions would be greatly appreciated.

Hi all,

I'm not quite a newbie having been using Linux for around a year now and think I know some of the basics at least. In the main it does what I want, some things better than they ever did on Window while some things frustratingly more awkward!

I have a load of music files that I'd like to search through and transfer some to the external sd card of my android phone. This was something that was a doddle during my Windows days but seems unbelievably difficult now. Back then I used a media player I loved, Mediamonkey, and could simply drag and drop whichever tracks I wanted, or right click and move to a device that way. Sadly this doesn't work too well with WINE though so is fine on XP through Virtualbox, apart from a lack of USB function.

I'm using Linux Mint 17.1 with a KDE desktop.

When I plug my phone into a USB port, it is recognised straight away as an android phone and I can navigate around it with no problems in Dolphin. I could look for each individual file and transfer them that way but with around 30,000 mp3s the task would take quite some time!

None of the media players I've tried so far recognise the phone or the storage on it.

I've installed Windows XP on Virtualbox and have Mediamonkey on there with all my audio files. I can't seem to get Virtualbox to recognise any USB devices so I can't transfer files that way either.

I find it annoying that, in effect, Android is a variety of Linux yet connectivity between the two is so complicated. Airdroid has been the best way that I've found but that's not an option.

I've been trying for 4 hours now and have got nowhere. If anyone can help I'd be grateful Thanks