Linux Purchase On Amazon, Loaded 3 Disc,s Wont Advance To Upgrade, From 8.2 To 11.4

Hi. Sorry to be so stupid, but I just managed to load and install this Linux (which I really like a lot) on my previously windows <--(bad) system.
But now I need to upgrade some software (like Adobe flash), and I have no clue how to do this. I understand I should go to my original linux distrubutor, and select software thru them (my "Linux distro").
But actually, it's been awhile since I did the install, and I dont exactly remember where I even got this distribution. (I know, I'm dumb--sorry).
Is there a way I can look at my linux system files and see who my distribution is thru, and where is their website. Or would it be easier if I just went thru the whole download and install of linux again <--(not really looking forward to that).
Or even, am I wrong about going thru the distro to do installs/upgrades?
Anything you can tell me will be greatly appreciated.

Long Live Linux !! David K

Hi, all, I am new to the forum and quite new to Linux, I am running Mint and Kali from a USB drive, all is going well with with the software and I am starting to find my way around it.

So, now to my question, I have 15 machines which all run from a CF card and the card has multiple partitions and is a Windows Embedded XP, not that the operating system makes any difference, I need to upgrade all the CF cards from 2gb to 4gb, so unfortunately Windows isn't an option to use to copy the drives as it doesn't recognise multiple partitions on a removable drive, so I cant just remove the drive, clone it and fit the new one.

What I need is a method of cloning the drive completely with both partitions, I have read about dd but cant seem to see anything about doing this with multiple partitions, as Linux sees it as two drives when I plug it in, how can I use dd or anything else to clone the drive which is bootable and has two partitions?

At some point I would like to automate the process as I could have many of these machines/drives to upgrade, is there a way to write a program that will automatically back up the drives from a USB drive and then reinstall it, I have seen this done before but I am not sure if this method did the whole drive, just the main drive or all partitions?

Trying to upgrade I get the following message "The upgrade needs a total of 913 M free space on disk '/'. Please free at least an additional 525 M of disk space on '/'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean". I went to the terminal and entered sudo apt-get clean. I have used Gparted to re-size each of of the partitions on the Linux side of my machine but I still get the message. What should I do?

Good Morning/Afternoon/Evening

As my subject line states I am trying to upgrade the MOBO/CPU/RAM on a system that has Mandrake 9.2 as the OS. Everything is terribly outdated on it, but unfortunately the OS is running a custom program that I did not develop and talking to the developer seems to be an impossible task. I have no working knowledge of any Linux based OS, so I am trying to get pointed in the right direction on possible troubleshooting that may occur. The system is not connected to the internet so it wont be able to automatically update the necessary drivers that I already know. I haven't gone forward with the upgrades as of yet, one because I am waiting on the CPU to arrive and two because my lack of knowledge makes me hesitant. I know that someone is thinking why not just upgrade the OS, the reason behind that is because I am unsure on if the custom software will even run on it. Any help would be appreciated.

tl;dr
Will I be able to just plug and play the new hardware as long I have the correct drivers?

Hi.

I've just bought this spanking new Dell with Ubuntu Linux on it, but when I'm trying to upgrade from 12.02 to 14.04, it just freezes during installation when it's unpacking adium ubuntu theme.

What should I do?

Should I restore factory settings and try again? or should I just leave it at 12.02?

I've searched online already, but it's been fruitless.

EDIT: Of course, I've updated everything else before I did the switch.

I don't know if anyone can help with this question, but I have an old Samsung R40 Laptop which used to run Windows XP. The specs show that it will not upgrade to Windows 7,8 or any other OS beyond XP. Yesterday I wiped the HDD clean and installed Linux Mint 17.1 Cinnamon which looks good and runs a little slowly but without problems. The Laptop is in good condition therefore I thought I would upgrade it by adding more memory to speed it up. The Memory installed is 2x512mbs PC2-3200S-333 DDR2 200pin, unfortunately I have not been able to obtain any. I would like to double the memory to 2x1gb (2056mbs). If anyone knows for certain where I can get this memory (or Compatible) in the UK or Europe I would be most grateful.

Thanks,

gael.

I don't know why I want this, but is there a way the Code:

sudo aptitude install <package>

or Code:

sudo aptitude upgrade

command could bypass the confirmation stage? It's always occurred to me shouldn't there be some command parameter for install/upgrade that does the work?

Let me give an example. Suppose I want to install Variety, the wallpaper changing application. Now, I know that I want to install the software with all the dependencies it requires to install/run - the entire package. So, isn't it obvious that I would press Y when aptitude shows the info what it's going to download/install and asks for permission?

I can't, however, imagine scenarios when seeing that information I'd change my mind and press N to abort the install/upgrade procedure.

What Is Linux Kernel?

Those who don't know what is the Linux Kernel they should know it because Linux kernel is the essential part of any Linux operating system. It is responsible for resource allocation, low-level hardware interfaces, security, simple communications, basic file system management, and more. Written from scratch by Linus Torvalds (with help from various developers), Linux is a clone of the UNIX operating system. It is geared towards POSIX and Single UNIX Specification compliances.

Latest Stable Linux Kernel Version 3.18.1
It's been a quiet week, and the patch from rc7 is tiny, so 3.18 is out.
I'd love to say that we've figured out the problem that plagues 3.17 for a couple of people, but we haven't. At the same time, there's absolutely no point in having everybody else twiddling their thumbs when a couple of people are actively trying to bisect an older issue, so holding up the release just didn't make sense. Especially since
that would just have then held things up entirely over the holiday break.
So the merge window for 3.19 is open, and DaveJ will hopefully get his bisection done (or at least narrow things down sufficiently that we have that "Ahaa" moment) over the next week. But in solidarity with Dave (and to make my life easier too let's try to avoid introducing any _new_ nasty issues, ok?]

To read all the changes and bugs fixed Download the changelog below -
Changelog

Why to Upgrade to the Latest Linux kernel

Recently in December Linux Kernel version 3.18.1 has been released and announced by Linus Torvalds. If you are using Ubuntu 14.04/14.10 or Linux Mint or any other debian/Ubuntu based then you can update to the latest kernel 3.18.1 to fix bugs, increase performance and security of the system.


Install Linux Kernel 3.18.1

Because it is not available via PPA, the needed deb packages of Kernel 3.18.1 are available via kernel.ubuntu.com. Follow the instructions for your system’s architecture exactly, in order to get a successful installation.

To install or update Latest Stable Kernel 3.18.1 on Ubuntu 15.04 vivid vervet, Ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS) , Linux Mint 17.1 Rebecca, Linux Mint 17 Qiana, Pinguy OS 14.04, Elementary OS 0.3 Freya, Elementary OS 0.2 Luna, Peppermint Five, Deepin 2014, LXLE 14.04, Linux Lite 2.0, Linux Lite 2.2 and other Ubuntu derivative systems, open a new Terminal window and bash (get it?) in the following commands:


For Linux system 32 bit :

Pass the following commands in the terminal to download the kernel file.

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

Install Linux Kernel 3.18.1


$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

For Linux system 64 bit :

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

Install Linux Kernel 3.18.1

$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

How To Uninstall Linux Kernel 3.18.1

If you come across any problem after installing/upgrading to linux kernel, can uninstall the newly installed kernel and switch back to old kernel.

$ sudo apt-get remove 'linux-headers-3.18.1*' 'linux-image-3.18.1*'

I try to upgrade the disto currently running in my box:

Description: Debian GNU/Linux 6.0 (squeeze)
Release: 6.0
Codename: squeeze

My sources.list looks like following:

deb http://security.debian.org/ wheezy/updates main
deb-src http://security.debian.org/ wheezy/updates main
# wheezy-updates, previously known as 'volatile'
deb http://mirrors.kernel.org/debian/ wheezy-updates main
deb-src http://mirrors.kernel.org/debian/ wheezy-updates main

After 2 commands:

aptitude update
aptitude upgrade

I have the same old good squeeze.
Help, please

yours`
sehrguey

I am running Antergos Linux 64 bit on virtual box. when I try to do full system upgrade I get a error:

resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: virtualbox-guest-modules: requires linux<4.0


I am using Ubuntu as my host OS and it's kernel version is 3.13.0-49-generic and in Antergos is using 3.19.3-3-ARCH. I guess both are less than linux 4.0

I don't know how to solve this.