Error While Installing Openshift With Redhat Subscrtiption Via Openshift.sh

Hi
I am getting the below error while trying to install openshift by script openshift.sh

subscription-manager repos --enable=rhel-6-server-ose-2.1-infra-rpms
Error: rhel-6-server-ose-2.1-infra-rpms is not a valid repo ID


Similar Content



Subscription Management

I am newly installed Redhat 7 , and try to yum package , but got the following error ,

I do not have paid for Redhat subscription , would advise if I want to yum package , I have to pay for Redhat ? if not , what can I do ? thanks

#yum install NetworkManager


the system is not registered to Redhat Subscription Management. you can use subscription-manager to register.

There are no enabled repos.

Run "yum repolist all" to see the repos you have

You can enable repos with yum-config-manager --enable <repo>

Can't Set Repos In RHEL6.0, Unable To Install Packages

Hi all.
RHEL 6.0 in Virtual Box, network is ok, it can resolve all repos (f.e. dl.fedoraproject.org, nginx.org),
but when I'm trying
Code:
# rpm -Uvh http://nginx.org/packages/rhel/6/noarch/RPMS/nginx-release-rhel-6-0.el6.ngx.noarch.rpm

I get:
Code:
curl: (6) Couldn't resolve host

When I'm trying with ip instead name:
Code:
curl: (22) The requested URL returned error: 404

Only rpmforge repo enabled, but it can't find any packets for install/update.

What can I do?
Thanks.

Unable To Register On The Subscription Manager

Hi, I am totally new to Linux, I have installed the operating system, and now I am required to register on the Red Hat Subscription Manager, but it gives me the following error "unable to reach server at subscription.rhn.redhat.com:443/subscription. Can someone please help me figure out how to resolve this problem.7

Repo Syntax Issue Rhel/centos

Hello again,

i need to understand once for all the syntax of files.repo.

When i need a repository i create under /etc/yum.repos.d/ the repository file

goofy.repo

with this syntax

[repository_name]
[goofy]
baseurl=ftp:///mydirectory/myrepodir
gpgcheck=0

---
Myrepodir contains all the *.rpm files i need

when i exit and save i get anytime this error

Code:
ftp:///mydirectory/myrepodir/repodata/repomd.xml: [Errno 14] PYCURL ERROR 6 - ""
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: repobase. Please verify its path and try again

What am i wrong for? How can i just say to my rhel/centos system
"Ehy, for rpm look inside /mydirectory/myrepo" ?

Thanks

How To Make Repository File In Red Hat Enterprise Linux 6.4 For Running Of Yum

Hello
I am working on Red Hat 6.4 Enterprise Server.Here commands systemctl and systemd are not working.Error comes command not found.I am using service command in place of systemctl to start,stop,enable and disable service etc.
example service httpd start
Also I am not able to install any software or package by using yum command.Whenever I try to install a package through yum the below error comes
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Repository 'repository_url': Error parsing config: Error parsing "baseurl = 'repository_url'": URL must be http, ftp, file or https not ""
Setting up Install Process
Nothing to do
Please advice some other commands or what to do.Regards Najam

Fail To Install Vsftpd

I use Redhat 6.3 , when I install run "yum install vsftpd" , it pops the following error, does it mean the library is not support , I have to update the kernel ? thanks

Code:
Loaded plugins: product-id, security
file:///media/localrepos/Server/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/localrepos/Server/repodata/repomd.xml
Trying other mirror.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package vsftpd.x86_64 0:2.2.2-11.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=============================================================================================================================
 Package                    Arch                       Version                            Repository                    Size
=============================================================================================================================
Installing:
 vsftpd                     x86_64                     2.2.2-11.el6                       RHEL-6.3                     151 k

Transaction Summary
=============================================================================================================================
Install       1 Package(s)

Total download size: 151 k
Installed size: 331 k
Is this ok [y/N]: 

Error Downloading Packages:
  vsftpd-2.2.2-11.el6.x86_64: failu  ../Packages/vsftpd-2.2.2-11.el6.x86_64.rpm from RHEL-6.3: [Errno 256] No more mirrors to try.
Loaded plugins

Centos 6.5 Error While Update Repos?

i'm get error while updating repo this is my log

======================================================
Loaded plugins: fastestmirror


File contains no section headers.
file: file://///etc/yum.repos.d/CentOS-Base.repo, line: 1
'iii\n'

======================================================
please help !!!!

RHEL Repo Sync To Local System

Hi Team,

I have RHEL satellite login credentials and I am able to update successfully my machine.Updating single worked for sometime.

My current requirement is to keep a separate VM locally in my environment and sync the RHEL repo to my machine.

How do I do it.

Thanks in advance

Error After Running Yum Update - Black Screen

Can you guys advise on how to resolve this? We have a machine (RHEL 6 32bit 2.6.32-504.8.1.el6.i686) that boots to a black screen. I can SSH into it from my machine, but when you're physically at the machine it just displays a black screen.

I have tried booting from the previous 2 kernels, but still get the black screen.

I am assuming something got hosed with the video stuff? Its an ATI Radeon 4000series card. Should I install the ATI driver from their website and try? We have never had to do that with these machines though.


Also, when running a yum update, we receive this error. I'm not sure how to resolve this and if resolving this will fix the video issues.

Code:
# yum update
Loaded plugins: downloadonly, product-id, refresh-packagekit, rhnplugin, security, subscription-manager
This system is receiving updates from RHN Classic or RHN Satellite.
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: libudev = 147-2.46.el6 for package: libgudev1-147-2.46.el6.i686
---> Package libudev.i686 0:147-2.57.el6 will be an update
---> Package libudev-devel.i686 0:147-2.46.el6 will be updated
---> Package libudev-devel.i686 0:147-2.57.el6 will be an update
---> Package udev.i686 0:147-2.46.el6 will be updated
---> Package udev.i686 0:147-2.57.el6 will be an update
--> Finished Dependency Resolution
Error: Package: libgudev1-147-2.46.el6.i686 (@rhel-i386-workstation-6)
           Requires: libudev = 147-2.46.el6
           Removing: libudev-147-2.46.el6.i686 (@rhel-i386-workstation-6)
               libudev = 147-2.46.el6
           Updated By: libudev-147-2.57.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.57.el6
           Available: libudev-147-2.29.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.29.el6
           Available: libudev-147-2.35.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.35.el6
           Available: libudev-147-2.40.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.40.el6
           Available: libudev-147-2.41.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.41.el6
           Available: libudev-147-2.42.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.42.el6
           Available: libudev-147-2.46.el6_4.2.i686 (rhel-i386-workstation-6)
               libudev = 147-2.46.el6_4.2
           Available: libudev-147-2.51.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.51.el6
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest


Heres after running yum update --skip-broken:

Code:
# yum update --skip-broken
Loaded plugins: downloadonly, product-id, refresh-packagekit, rhnplugin, security, subscription-manager
This system is receiving updates from RHN Classic or RHN Satellite.
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: libudev = 147-2.46.el6 for package: libgudev1-147-2.46.el6.i686
---> Package libudev.i686 0:147-2.57.el6 will be an update
---> Package libudev-devel.i686 0:147-2.46.el6 will be updated
---> Package libudev-devel.i686 0:147-2.57.el6 will be an update
---> Package udev.i686 0:147-2.46.el6 will be updated
---> Package udev.i686 0:147-2.57.el6 will be an update
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
---> Package libudev.i686 0:147-2.57.el6 will be an update
--> Processing Dependency: libudev = 147-2.57.el6 for package: libudev-devel-147-2.57.el6.i686
--> Running transaction check
---> Package udev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: udev = 147-2.46.el6 for package: libudev-devel-147-2.46.el6.i686
---> Package udev.i686 0:147-2.57.el6 will be an update

Packages skipped because of dependency problems:
    libudev-147-2.57.el6.i686 from rhel-i386-workstation-6
    libudev-devel-147-2.57.el6.i686 from rhel-i386-workstation-6
    udev-147-2.57.el6.i686 from rhel-i386-workstation-6

Thanks in advance.

RHEL 7: No Output From Ip Commands

Hi,

Apologies if this is in the wrong forum, wasn't sure which was most appropriate...

I've built a Redhat 7 VM from an ISO and I've carried out various configuration on it and for some reason when I now run ip commands (for examnple 'ip addr show') I no longer get any output on screen.

Example...
[root@rhel-7-xx2 ~]# ip addr show
[root@rhel-7-xx2 ~]#

Version I'm using is:
Red Hat Enterprise Linux Server release 7.0 (Maipo)

I built another server and had the same problem and managed to fix it by yum updating all packages so it looks like a package needs to be updated but not sure which one.

If I pipe the output to a text file I can see the output okay in the file.

I have a ticket open with Redhat but it's taking a while to troubleshoot with them so thought I'd see if anyone else had seen this in the meantime...

Thanks
James