How Do I Use My AMD 280X To Render Game Graphics?

I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You

Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.

Hi all,

I need to swap out my HDDs this weekend due to some problems and at this point, am getting tired of Microsoft.

For the longest time I've stuck with windows because I was big into gaming, but these days not so much. And it seems like all of the games I like are available for Linux these days.

So, my questions are :

I've heard that every time a new version of Linux comes out you need to completely reinstall your OS. Is this true? I've got a feeling it may be partially true, but there is more to it. I'm assuming you only need to do this if you want the latest overall version, like Windows, but you get minor updates and can keep running it for years?


How do games run on it? My primary game (be nice..) is Minecraft and other games would be Half life 2, TF2, Counter Strike Source etc. I also run emulators for NES/SNES etc.

If I lose 5-10 FPS over it, it's not a deal killer.

I'll be installing a 250GB SSD + 1TB WD Green this weekend and ditching my two 1TB drives that are showing signs of trouble.


System specs going by memory are :

I5 750 running stock. EVGA P55 SLI motherboard. EVGA GTX 460 video card. 12GB Gskill Ripjaws ram.

I expect it will run any version of Linux fine, but would like opinions on that as well. The last I tried was a few versions of Ubunutu and had no complaints but that was back in 2008-2009.

All opinions are welcome.

OK, so I'm really new at this. And I just figured out how to download google earth. But then when I went to open it, it sadi that my graphics card was insufficient to run the graphics. Soooooo

1. What the heck IS a graphics card? Is it a piece of hardware or software?
2. How do I find out what kind I have?
3. How do I update it?

Thanks! I don't know what I'd do without ya!

Hello, y'all with vast Linux knowledge, I've built my own gaming desktop, here are the specs:
1-MOBO Asus M5A78L-M LX Plus
2-AMD Radeon Graphics R9 270, 2GB DDR5 Memory
3-2 Hyper X Memory Cards totalling 16 Gb of RAM

Have installed and runninbg Zorin 9.0 Ultimate (Ubuntu 14.4) - MY PROBLEM, I am unable to downlolad any games especially "Minecraft", "League of Legends" and a host of other games on "Steam". I have Wine Geko (32 bit) 2.1 version installed and have Winetricks as well, when I open it I can install a host of games, however, nothing is installed. This is the last straw for me, I have no clue what to do do being a Newbie and unfortunately the folks at "Zoringroup/helpdesk" have been absolutely useless as well. Thanks.

I'm having trouble getting OS installs to work on this low-end laptop. I've tried Linux Mint, OpenSuse, Manjaro, Zorin OS Core 9 (32bit, 64bit and lite versions). My problem is that once installed, the graphics aren't rendered correctly or (with Zorin) the system would freeze right after logging in. Manjaro did install and work, but the screen was so dark it was unusable, even after adjusting the brightness levels. With Linux Mint, the compatibility mode worked perfectly using the live cd, but the graphics were too distorted once installed. OpenSuse also had distorted graphics. I just want to put the laptop to use until it dies on my.

I've tested the hard drive with the on board diagnostics and I've checked the memory. Neither of those tests gave any errors.

The specs a

AMD Athlon 64 X2 Dual Core TK-55
2 gigs of DDR2 memory
Nvidia GeForce Go 6100 graphics card.

Any help would be appreciated. I'm not an expert, so be gentle with the help and recommendations.

Hi LQ,
I am currently experiencing an issue on a fresh install of Mint 17.1 Cinnamon in which I am permanently stuck in fallback mode (that is, unless I hard shutdown or reboot) on an aging laptop with AMD Radeon HD 4200 graphics (considered legacy). I believe this issue was caused by a failed install of AMD's latest linux graphics drivers, in which I literally opened the .run file and attempted to install. The install failed (some error), of course, but when I rebooted, I was kicked into fallback. After some googling, I autoremoved fglrx then installed fglrx, as I read would reinstall fglrx, the proprietary drivers for AMD cards and rebooted. Still stuck in fallback. I removed and installed Xorg and rebooted. Still stuck in fallback. I downloaded the AMD legacy drivers from AMD's site (my card's series included with this set). Had to change the permissions to run this .run file but eventually ran it from terminal, but this install also failed (claimed I was missing tool(s), despite not indicating precisely what I was missing). I'm still rummaging around for fixes, but maybe asking can help. I can provide some more info below, but let me know what else you need (and how to get it) if you wish to help. I really want linux to work out for me instead of shelling out $$ for Windows, but so far this has been a rocky start. Thanks


Code:

inxi -G

yields
Code:

Graphics:   Card: AMD RS880M [Mobility Radeon HD 4225/4250]
X.Org: 1.15.1
drivers: fbdev,ati,radeon (unloaded: fglrx,vesa)
Resolution: 1024x768@76hz
GLX Renderer: N/A
GLX Version: N/A

Code:

lshw -C video

yields
Code:

*-display UNCLAIMED
description: VGA compatible controller
product: RS880M [Mobility Radeon HD 4225/4250]
vendor: AMD
physical id: 5
...(bunch of stuff on specs)

Have also did apt-get update and apt-get dist-upgrade.
Still no luck, let me know what you think.

Hello

I have linux mint 17.1 cinnamon installed on my computer, but the surround sound is not working (I only get stereo from two speakers)

When I run lspci I can see that my card is called

C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)

there is another embeded card that came with my computer called

[AMD/ATI] Trinity HDMI Audio Controller

but I have my speakers hooked up to the first one and I have selected this card in the "output device" option on the lower right hand side of the screen, and I have selected the sound setting "analgog 4.0 surround".

My surround sound used to work when I had windows xp and xubuntu installed on an older computer with the same surround sound card attached. So I can't understand why it is not working now.

Can anyone help me with this?

when I run

aplay -l

I get:

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 0: CMI8738 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 1: CMI8738 [C-Media PCI 2nd DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: CMI8738 [C-Media CMI8738], device 2: CMI8738 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0

inxi -Fzx
System: Host: rene-linuxmint Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Gnome Distro: Linux Mint 17.1 Rebecca
Machine: System: Gigabyte product: N/A
Mobo: Gigabyte model: F2A58M-DS2H version: x.x Bios: American Megatrends version: F1 date: 04/28/2014
CPU: Dual core AMD A4-4000 APU with Radeon HD Graphics (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 11977.2
Clock Speeds: 1: 1400.00 MHz 2: 1400.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Trinity [Radeon HD 7480D] bus-ID: 00:01.0
X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1600x900@60.0hz
GLX Renderer: Gallium 0.4 on AMD ARUBA GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card-1: Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio Controller driver: snd_hda_intel bus-ID: 00:01.1
Card-2: C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci port: d000 bus-ID: 03:06.0
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Qualcomm Atheros AR9485 Wireless Network Adapter driver: ath9k bus-ID: 02:00.0
IF: wlan0 state: up mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: e000 bus-ID: 01:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 820.2GB (35.7% used) 1: id: /dev/sda model: WDC_WD3200AVCS size: 320.1GB
2: USB id: /dev/sdc model: MQ01ABD050 size: 500.1GB
Partition: ID: / size: 290G used: 21G (8%) fs: ext4
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 0.4C mobo: N/A gpu: -3.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 169 Uptime: 4:07 Memory: 1209.9/3068.3MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4


aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Hardware device with all software conversions
sysdefault:CARD=CMI8738
C-Media CMI8738, C-Media PCI DAC/ADC
Default Audio Device
front:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Front speakers
rear:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI 2nd DAC
Rear speakers
surround40:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
4.0 Surround output to Front and Rear speakers
iec958:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct sample mixing device
dmix:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct sample mixing device
dmix:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct sample mixing device
dsnoop:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct sample snooping device
dsnoop:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct sample snooping device
dsnoop:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct sample snooping device
hw:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Direct hardware device without any conversions
hw:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Direct hardware device without any conversions
hw:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Direct hardware device without any conversions
plughw:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Hardware device with all software conversions
plughw:CARD=CMI8738,DEV=1
C-Media CMI8738, C-Media PCI 2nd DAC
Hardware device with all software conversions
plughw:CARD=CMI8738,DEV=2
C-Media CMI8738, C-Media PCI IEC958
Hardware device with all software conversions

Hello I'm real new to Linux mint 17 and I was wondering why some games work and some don't. Are they for different operating systems? The games that do work are really good so far. And also what should I do if the operating system hangs up just turn off the computer or is there something else I should do?

hi folks , total linux noob here hopefully somebody can help me with a problem
i wanted to try out linux mint on my apple imac and i seem to have ended up with this ramdisk or memdisk which is some sort of security version of linux

this damn thing has total root access and has setup all sorts of remote server connections and wont let me do a bloody thing , even format a usb stick

its corrupted my apple install and base efi and just got me on total lockdown

anybody know how to get rid of this ? please

Install Ethernet, Intel 4965AGN 802.11abgn

Postby xpdin on Fri May 15, 2015 6:53 am
Hi,

I can't set my wireless anymore like before with the next command,

Code: Select all
sudo apt-get install bcmwl-kernel-source



Can someone help me please?

The new log for

Code: Select all
inxi -Fxz

is:

xpd@Multix ~ $ inxi -Fxz
System: Host: Multix Kernel: 3.13.0-37-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.6 (Gtk 2.24.23) Distro: Linux Mint 17.1 Rebecca
Machine: System: Hewlett-Packard (portable) product: N/A version: F.09
Mobo: Hewlett-Packard model: 30D7 version: KBC Version 83.12
Bios: Hewlett-Packard version: 68MDD Ver. F.09 date: 01/11/2008
CPU: Dual core Intel Pentium Dual CPU T2390 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 7447.96
Clock Speeds: 1: 800.00 MHz 2: 1600.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV516/M62-S [Mobility Radeon X1350] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon FAILED: fbdev,vesa Resolution: 1152x864@60.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Broadcom BCM4311 802.11a/b/g driver: b43-pci-bridge bus-ID: 10:00.0
IF: N/A state: N/A mac: N/A
Card-2: Intel 82562GT 10/100 Network Connection driver: e1000e ver: 2.3.2-k port: 5000 bus-ID: 00:19.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (1.7% used) 1: id: /dev/sda model: Hitachi_HTS54252 size: 250.1GB
Partition: ID: / size: 49G used: 4.1G (9%) fs: ext2 ID: swap-1 size: 40.00GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 48.0C mobo: 27.9C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 141 Uptime: 2 min Memory: 191.2/2015.6MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
xpd@Multix ~ $


Thank you very much.