hye everyone... i newbie here..
how can i placing all ACL line in "squid.conf" into database...
so i can manage blocking website only in databse...
i had a problem, i installed and config squid on fedora complete but when i start service squid not success it was display job for squid.service fail. See "systemctl status squid.service" and "journalctl -xe" for details please help me
hye all... 1st of all merry Christmas...
i'm degree student.. and now i have to do final year project..
my project is proxy server.. my problem is i want to connect config file from squid to database server...
i must install squid on fedora and database on difference PC... anyone can help me...
I have setup proxy server as squid Now i would like to enable High Availability between two squid proxy servers acting as one.
I am in the process of setting up my first VPS to host a website that I have been working on. By profession, I am a programmer, so I know nothing of Linux or web hosting!!
Thanks to lots of help on here this weekend, I finally learned how to access my VPS using SSH. (That only took a day or two to learn!) And my first command-line task was learning how to copy a file to another folder while maintaining the original modified date. (That only took another half-day!)
Whew!
So the next thing that I need to do is set up MySQL on my VPS...
My VPS runs on CentOS 6, and it also comes with cPanel, but since astrogeek and Miati were persistent in explaining why it is better to do things via the command-line versus using a GUI, I figured I would check things out...
My cPanel comes with some "wizard" that supposedly sets up a MySQL database for you, but whenever I see "wizard" I tend to run!
Advanced Support for my web host said that I should definitely use cPanel to create my database and create the users, because if I did it using phpMyAdmin it would supposedly mess things up as cPanel wouldn't recognize things?
(BTW, I requested MySQL Root access this morning, but I do not have Root access to my VPS - by choice for now!)
Questions:
1.) Should I listen to my web host and use the cPanel wizard to create a new MySQL database?
2.) If I decide to bypass cPanel, how exactly would I use my MacBook to talk to my VPS and do MySQL stuff over command-line?
FWIW, I developed my entire database using phpMyAdmin in MAMP on my MacBook. When I created my original database in development, I used phpMyAdmin's GUI. And then for everything else (e.g. create table, indexes, queries, etc.), I hand-wrote the SQL in TextEdit and then ran it in phpMyAdmin.
But I have no clue how to do any of this on my VPS!!
3.) How would I use the command-line to create a new database and set up groups and users for MySQL?
4.) If I did things by command-line, is it true that I would break cPanel?
I have been working on my website for the last 3 years, and it is ready to "go live", but I am discovering that setting up my VPS properly - and with lots of security - and getting things like PHP and MySQL set up is a very daunting task!!!
Sincerely,
Rob
SIR
I HAVE RECENTLY INSTALLED CENTOS7 AND CONFIGURED SQUID ON IT . I AM FACING A TYPICAL PROBLEM I AM ABLE TO BROWSE THE NORMAL PAGES BUT WHEN ANY PAGE THAT STARTS WITH HTTPS:\\ IS NOT ALLOWED TO BROWSE.
I HAVE CHECKED MY SQUID.CONF FILE BUT AM UNABLE TO FIND THE PROBLEM.
I HAVE DISABLE SELINEX AND THERE ARE NO RULES IN IPTABLES ALSO.
KINDLY HELP
PASTING MY SQUID.CONF FILE
#
# Recommended minimum configuration:
#
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl all src all
#acl manager proto cache_object
#acl localhost 127.0.0.1/32
#acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl localnet src 191.254.178.0/24 191.254.28.0/24 10.0.43.0/24 10.0.42.0/24
http_access allow localnet
icp_access allow all
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
#http_access allow localhost manager
http_access allow localnet manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
#http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 8899
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
cache_peer 191.254.178.76 parent 3128 0 no-query no-digest
#icp_access allow all
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
I have a database , there are some table in it , in this database , there is a string "error" , I would like to change it to "warning" , except export all data to text , find and replace string , and then import back to database , is there other method may bulk update the string ? thanks
I'm a newby Slackware(14.1) user, I downloaded and installed the SlackBuild for lemonpos, also installed mysql database Ok, but when I star squeeze or lemon it asking me the administrator or supervisor username and password,I try admin-linux and didn't work, also get those error's:
setup Logs.. done, QSqlError(-1, "Unable to find table logs", "")
Login()
Error** : QSqlError(1046, "QMYSQL: Unable to execute query", "No database selected"
No database selected QMYSQL: Unable to execute query"
**Error** : QSqlError(1046, "QMYSQL: Unable to execute query", "No database selected")
squeeze(2233) KPlotWidget::Private::calcDataRectLimits: y1 and y2 cannot be equal. Setting y2 = y1 + 1.0
Any helps, I'll apreciate. the domain lemonpos is not available.
Homepage: http://lemonpos.org/.
We have 20 systems and I installed SQUID proxy on CENTOS to limit internet access but I'm unable to configure LAN and WAN. We have got one router in the network with 192.168.1.1 as default gateway. I installed squid successfully but unable to configure it in client systems as I'm unable to configure LAN and WAN ips in CentOS.
Please suggest me correct configuration of LAN and WAN for my network. We don't have any static IP with us. What series of IPs do I have to configure in Linux server? After that, what would be my Proxy IP?
I have basic knowledge about Linux...
Please suggest me Conf file accordlingly.
I am experiencing a strange issue where squid asks me to authenticate twice. Here is how it goes:
I have my Firefox browser set to go out my squid proxy. Whenever I open the browser I am prompted for my username and password, which I enter. Immediately the browser fetches my homepage, however, at almost the exact same time I am prompted to enter my username and password again.
Clearly the I entered the correct information the first time or the browser would never load my homepage. The odd part is that sometimes I can just cancel the second request for a username and password without issue. Other times I MUST enter it to continue browsing.
Here is a copy of my config: http://pastebin.com/mdM7gfLf
Any ideas on what is going on here? Thanks in advance to anyone who has some thoughts on this.
Hi!
I wrote a script shell about changing IP of the httpd.conf from text file and saving a new httpd.conf file for all IPs in the text file. The code is below, Im using mremote on windows (RHEL Release 5.7), and getting this error:
./script1.sh: line 19: syntax error: unexpected end of file
Please help me about that error. Thanks!
(ps: line 19 is the last line in the code => done < "$filename" )
#!/bin/bash
DATE='date +%Y%m%d_%H:%M:%S'
NAME=httpd_ip_change
EXTENSION=conf
max=10
filename="$1"
while read -r line
for ((i=2; i<=$max; ++i ))
do
touch $NAME$i.$EXTENSION.$DATE
sed "s/<VirtualHost 10.11.92.81:80>/$line/g" ./httpd.conf > $NAME$i.$EXTENSION.$DATE
done < "$filename"