i am very new to linux but i wanted to try it out, my main windows drive is tiny so i decided to format my usb hard drive and use that, first i tried to install ubuntu but i got a normal.mod not found error, so after some reserch and a grub reinstallation it booted once,
the next day however i got another error so i decided to switch to mint to see if it would work any better, but i'm still getting the normal.mod not found error.
i've tried a whole bunch of things like reinstalling mint and grub, boot repair, but nothing works, i'm kinda frustrated because i know it works because it booted up before but i just can't figure out how to fix it.
Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.
I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You
Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.
Hi, So im quite new to linux and im not surprised as iv tried before to check it out and failed then (old computers problem) but i decided to have another go on a new comp recently.
UEFI mobo
Nvidia geforce 770 as output.
I need a duel boot of win7 & mint. Win7 is installed.
UEFI has caused me so many problems its just beyond me ! (i had never heard of it before i brought this comp)
booting Mint from a cd/dvd works fine.
booting from a USB fails with a blank or locked up screen at the first mint logo. (many tests with dif methods of creating live USB)
Installing mint with grub over the top of win boot loader fails , i get no options to choose between win & linux it boots straight to linux and then fails (same error as above)
I have a small SSD with win7 , there is not a lot of space on it so i want to install mint 17.1KDE on a different HDD.
After a month or so of reading testing reading testing etc i ended up getting mint installed on partitions i created on secondary HDD but i had to keep the windows boot loader in place and use easyBCD.
However now i get the choice of win7 or linux and windows still actually works (breakthrough ^^) BUT linux just crashes at boot (at the first logo) and then the monitor looses all signal?
I am soo frustrated. Mint will run of a CD but i can not get it to work in any other way , please help
Thx.
Please Help,
I have a Windows 7 and Fedora 20 dual boot pc .
Today i deleted the fedora partition from windows disk management and then restarted my pc.
Now i am stuck in the 'grub rescue > ' screen ...... It is showing 'no such partition ' , after searching through the internet i tried these commands......
grub rescue > set boot=(hd0,msdos6)
grub rescue> set prefix=(hd0,msdos6)/*boot/grub
grub rescue> insmod normal (after this line ,i am getting the error , grub rescue > unknown filesystem)
grub rescue> normal
Don't know what to do ,but i want to get back to the windows os first ,also i don't have the windows or fedora live cd . My Windows recovery is stored in my pc hard drive....... plzz help so that i can resolve this issue
Did it again!
Last week, with help from this forum, I was able to install Linux Mint 17.1 dual boot with Windows 8.1. It worked so well, I decided to explore other Linux distros recommended by forum members as some I wanted to check out.
I was using Unetbootin to download and install these as live sessions on my Windows 8.1 partition.
On my last such download, something went wrong, and no doubt I caused the error, but no clue as to how.
When I opened up this PC, I got the normal dual boot option for Windows and Mint. When I selected Windows, I found an additional dual boot option between it and Unetbootin! Somehow I created a partition (?) on my C Drive for Unetbootin (see Thumbnail below).
This Unetbootin option only goes to a page for me to choose another OS. Further, when I rebooted, the Windows/Mint dual boot option no longer existed, just the Windows/Unetbootin one.
Been checking out various articles and websites about BCD/MBR repair, but nothing definitive (that I can understand) about modifying these to delete the Unetbootin partition and restoring the Windows/linux dual boot.
Naturally, this is a newbie land mine area, so I'm very reluctant to try anything I can't fully understand, which is the category everything I've Googled on this topic falls into.
Anyone know how I can resolve this short of a complete start over
installation based on steps that basically a PC fence post can follow?
TIA
Cheers!
I am installing Linuc Mint Rebecca on this computer: CPU: I7, motherboard: ASUS X99-A, HD: 2x 2TB, motherboard BIOS RAID1, so the total hard drive size is 2TB
While I was installing LINUX MINT on RAID1 hard drive, the installation system pop up ??? ???windows at Wher Are You step, after I click OK, jump to Installation Type, no matter which type I select: Erase disk and install Linux Mint or Someting else, ??? error message pop up at Where are you.
And if I click either of the two disk, it shows "Unable to mount location"
however, I can double click and see the content of RAID1 2TB disk.
Question: what's the problem of LINUX MINT installation on RAID1?
I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....
When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.
Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.
I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.
Thank you in advance for reading through this and for any help offered.....
Mikey
I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...
This is all on a 32 bit AMD system btw.
What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.
All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..
So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...
So, any help appreciated, thanks.
I downloaded Mint and burnt it to a CD. The computer boots up fine with the CD, goes to the Mint home screen, but when I try to install it and partition the hard drive to run next to Windows Vista, the screen completely garbles (green background with short different colored horizontal lines all over it). Is this normal? Should I let it run for a while and it will clear up? How long can I expect the partitioning to take?
After creating a bootable usb using Universal USB Installer. I booted up the sytstem (Dell Inspiron N4110) F12 boot on usb, did the install, everything went well until after copying files and then the error message that "The grub-pc package failed to install into /target.. So i continued without a boot loader and now am trying to figure out how to get it back.
Previously i did a perfect dual boot of Kali Linux wherein the Grub boot loader was present. I did however uninstall Kali, reclaim HDD space, and even use EasyBCD to remove Grub(i believe).
Also worth noting is that before this dual boot with pignuy and after uninstalling kali linux i did a complete reinstallation of my windows 7 system using the recovery HD.
Now i would like to know how i could get grub boot loader back onto my system so that i can boot up Pinguy OS. Thanks