Installing Linux Alongside Windows 8 (For Now) Question

Hi all,

As you can probably tell I am new to Linux and new to the forum, I am using Kali and Mint both as live Linux environments on USB drives, all is good and I am finding my way around, the reason for the post is that I need to copy 15 CF cards that have multiple partitions, Windows isn't really an option as it can only see one partition on a removable drive, so here goes with Linux.

The CF cards contain Windows Embedded XP in one partition and a separate partition for user data which isn't protected, not that the contents matter, only the fact that it is bootable with multiple partitions, the object is to upgrade the old 2gb cards to 4gb cards to add an additional program on the embedded drive, but they are both full.

as long as I can copy both partitions over the partition size doesn't matter as I can resize that if necessary, but I need both partitions to copy over to the new drive.

I have read that dd command is the way to go but cant find much on multiple partitions which display in Linux as two drives, so how do I go about this, any pointers

Ideally I would like to automate the process as this is something that we could end up doing on a regular basis, I have seen a USB drive that was plugged into a PC and through a basic GUI allowed you to copy a HDD but I don't know If that would do both partitions, something for the future?

Hi,

Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.

Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.

Hi All,

I recently decided to tryout Linux and dual booted my laptop (originally just had windows 8) with Xubuntu. Now I want to try out Kali Linux. So I downloaded Kali and made a bootable USB, the problem is that when I try to boot from the USB it just brings up the grub menu asking me to select Xubuntu, Windows etc. I've changed the boot menu in the BIOS but that has no effect.

I've tried booting into windows and the restarting by holding shift but when I select the usb option it just says:

"system doesn't have any USB boot option. Please select other boot option in Boot Manager Menu"

and then returns to the grub menu. I don't understand because I used a bootable usb to install xubunto?

I'd be really grateful if anyone can help me out with this!

Thanks

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

Hello everyone,
Recently, I installed Linux Mint 17 (Cinnamon) on my HP dv6 Laptop. During installation Linux was not detecting my original Windows 7 and was attempting to occupy the entire hard disk. So I used the "Something Else" option to manually create separate partitions for Linux (Previously I had allocated around 120 GB free space for Linux using Windows Disk Management). This installed the Linux but after booting it does not detect Windows 7 and directly boots to Mint. I have tried installing and updating the grub but it did not help either.
Please Help...

how do i input this into the CLI?

Create two new files a.txt and b.txt, create a tarball of the two files

using kali linux on windows 7

I have installed linux(mint and ubuntu) on a few laptops, but i have an ASUS eEEE netbook PC..Atom processor...No DVD drive...

I have chosen PUPPY Linux distro, and I have booted from a thumb a few times to make sure everything seems to work....but...when I start trying to install...well...its asking me about using the partition tool to change the types of partitions that are best for linux...

I am not understanding the instructions...as far as what i need to do...has anybody done this install ,,,the current netbook OS is Windows Starter 7. I just want to REPLACE it entirely with linux puppy. I did not encounter this on my laptop installs..i just said yes...replace the current OS..but somehow the netbook install is acting different....do i need to change the partitions or can i just take the defaults...I forge the exact partition extentsions..something line ntfs and it says to change to ext2 and ext3...not sure how to do that...

Can some direct me to the best way to do this? thx.

Hi, all, I am new to the forum and quite new to Linux, I am running Mint and Kali from a USB drive, all is going well with with the software and I am starting to find my way around it.

So, now to my question, I have 15 machines which all run from a CF card and the card has multiple partitions and is a Windows Embedded XP, not that the operating system makes any difference, I need to upgrade all the CF cards from 2gb to 4gb, so unfortunately Windows isn't an option to use to copy the drives as it doesn't recognise multiple partitions on a removable drive, so I cant just remove the drive, clone it and fit the new one.

What I need is a method of cloning the drive completely with both partitions, I have read about dd but cant seem to see anything about doing this with multiple partitions, as Linux sees it as two drives when I plug it in, how can I use dd or anything else to clone the drive which is bootable and has two partitions?

At some point I would like to automate the process as I could have many of these machines/drives to upgrade, is there a way to write a program that will automatically back up the drives from a USB drive and then reinstall it, I have seen this done before but I am not sure if this method did the whole drive, just the main drive or all partitions?

One thing i love about Linux is the many different distros! And today i decided to spend a a little on a new lesser expensive laptop to dual boot Ubuntu and Kali.. No Windows at all on that machine. I have an outlook web access account for any microsoft needs. The new machine should be here by the weekend! Cant wait to get it all installed. Im doing it this way to force my hand to use it more often. I am also in school for InfoSec so it makes sense to me. Ubuntu is traditional it seems while kali is the pen-testing king

-Randy

Any suggestions? Oradvice?

I am trying to install Kali-Linux. and I get a message that I have the wrong installer kernal that doesn't match. what do I do??? the attachment is a pic of the warning.