Error: Unknown File System Entering Rescue Mode...

Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.

Dear gurus,

I am using NAS with Linux BizNAS-02H5 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux OS version.

I am facing problem with rootfs / , it is 100% full, its total size is 9.7GB.

Now i want to increase the space of rootfs, i have free space on attached drives, both partioned and unpartioned space is free,

How can I mount space on root folder or ( / ) folder.

Regards,

Khurram Khurshid

I compose on a Dell laptop model #Latitude D505. I have Xubuntu 12.04 (it won't upgrade) on it. Here are the Dell's specs:

Quote:
Dell Inspiron 8600 (Pentium M 710 1.4GHz, 1GB RAM, 40GB HDD)
And it has 20 GB free space. I guess on paper it should run the Xubuntu easily but it is deadly slow. Most of the things I do in the terminal don't complete (I tried to install Dropbox--no luck.). Sometimes I can't even open the Ubuntu Software Center, let alone install stuff from there.

I have LibreOffice 4.2 something on there and that is all I need. Like I was saying Dropbox would be nice though.

So I stared checking out lighter distros. (I was told Xubuntu was one of the lightest--btw I have two desktops with Xubuntu on them as well--distros out there but was shocked when I started investigating.) (see screenshot)

So as long as I can install a relatively recent version of LibreOffice (and like I said Dropbox would be nice) I will be happy.

To reiterate: I'm just using the laptop as a word processor. Yes, I would have to be online (and can be) to use Dropbox but Dropbox is not essential.

Btw. The libreoffice on there now works well (once it gets going) as a word proccesor, but with all those distros that are so much smaller I was thinking that I could even improve on the word processor's speed.

Thanks.

I always thought dual booting was a very complicated thing: partitions, swaps, etc. But I was just installing Xubuntu 15.04 on a Windows computer and it gave me the option to install my Xubuntu next to the Windows. That's dual booting then, right?

And is that cool to do or should I choose the custom choice (I clicked on it to check it out and it looked mega complicated)?

I have a RHEL 5.3 machine with the following partitions and free space:

Free space on the partitions
/ : 74GB
/boot : 81MB
/var : 73GB
/home : 37GB
/icat : 758MB
/opt : 1.5GB

Now is it possible to allot a free space of some other partitions to /opt? I want around 100 GB more space on /opt. Thus, if it is possible I could move 50GB from /var and /20 GB from /home to /opt. This can make at least 70 GB space available.
What are other possible ways to increase space on /opt?
Thanks in advance !!!

I am new to LINUX and am trying to install Fedora 20 on an ACER Aspire Z5600, the specs are as follows : Pentium Dual Core 64-bit 2.7 GHz processor, 3 GB RAM and well over 100 GB of free HDD space.
When it starts I get the message: not enough memory to load image.
Not sure what the problem is.

dear all. i do have an image of a system with all the settings and i got it flashed to the new drives (cf, sd, hard disk....). the problem i am facing is that the original image is 2GB and it does not see the whole space of the disk. now everytime that i have to expand it i mount it to another system and through gparted i do system expansion.
I came across raspberry and i have seen the raspi-config(https://www.raspberrypi.org/document...aspi-config.md) they do have and it is really cool. it has a function to expand the partition without user interference.
is there a way to have a tool like this in debian 6 or 7 so i could call it and expand the partition?

I was wondering if I can repair my current partitioning setup using gparted, or if I should just reload Xubuntu. Basically I screwed up by making the primary partition only 256M, and made a massive extended logical partition for everything else, and did not leave swap space. I am doing this on an older PC with MBR, dual processor, 2G RAM each processor, 160GB hard drive space. It is single boot, no Windows. I would like the partioning to be as follows, leaving empty disk space for other Linux flavors:

/ 13GB ext4
/home 50GB ext4
swap 8GB swap

sudo parted /dev/sda print all
Code:

Model: ATA ST3160812AS (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type      File system  Flags
 1      1049kB  256MB  255MB  primary   ext2         boot
 2      257MB   160GB  160GB  extended
 5      257MB   160GB  160GB  logical
                                                                       
Error: /dev/mapper/xubuntu--vg-swap_1: unrecognised disk label

Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/xubuntu--vg-root: 158GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End    Size   File system  Flags
 1      0.00B  158GB  158GB  ext4
                                                                          
Error: /dev/mapper/sda5_crypt: unrecognised disk label

df -hT
Code:

Filesystem                   Type      Size  Used Avail Use Mounted on
/dev/mapper/xubuntu--vg-root ext4      145G  6.5G  131G   5% /
none                         tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev                         devtmpfs  989M  4.0K  989M   1% /dev
tmpfs                        tmpfs     201M  1.1M  200M   1% /run
none                         tmpfs     5.0M     0  5.0M   0% /run/lock
none                         tmpfs    1003M   88K 1003M   1% /run/shm
none                         tmpfs     100M   24K  100M   1% /run/user
/dev/sda1                    ext2      236M  120M  104M  54% /boot
/home/mbrk/.Private          ecryptfs  145G  6.5G  131G   5% /home/mbrk

Hello!

TL;DR: Deleted Linux partition from Windows. Stuck at Grub rescue prompt.

I'm sorry to trouble you guys, because I'm an idiot.

So I'm wanting to dual-boot Kalilinux and Windows 8.
I went through the steps such as creating a bootable USB, changing the
boot order and so on. I get into Kali, start Gparted and try to partition stuff.

I'm far from an expert, so I wasn't sure what to do. Long-story short, I
didn't seem to get Kali installed correctly, due to something with an EFI
drive being required. So I boot into windows and then stupidly, because it said in the guide,try to "uninstall" Kali by removing it's partition, inside Win8 haha... So I did.

Now I simply get the Grub rescue command prompt when I boot from the same
USB and I have no idea how to fix it. I've run bootrec.exe/fixmbr in Windows haha,
for what it's worth. However Grub can't find any partition it says.

In windows, I have like... 2-3 Recovery partitions. Does anyone know how to remove
them??? I've tried to clear as much as I can, besides the C drive and Auxillary D drive.

Any advice would be very appreciated.

How do I convert a single hard drive to GPT without losing data and without re-installing.

Current systems
Windows 7 Partition /dev/sda1 (Primary)
xubuntu 14.10 /dev/sda5 (Logical) (maybe upgraded to 15.04 when released)
Swap /dev/sda6 (Logical)

I read some guides they were not clear. They also said it is better to do a clean install of each system. None of the guides give a step by step, they always leave something out.

I am not turning on secure boot but I am turning on uefi.

I have a Mini-partition wizard boot cd that can help out but wouldn't covert a system partition.

I have a way to make an iso for xubuntu 14.10


When do you turn on UEFI in the bios before or after converting drive?





Mod, please move to correct forum if needed