Uploading Pictures From Cellphone To Ubuntu

My son built me a new desktop from the ground up, which works beautifully, but I'm new to Linux (Ubuntu) and learning as I go. Since my computer is custom, I don't have any "instructions" to lean on. I want to upload pictures from my cell phone, but don't know how because I'm not very computer literate (sorry!). I have tried plugging in my LG G3 phone with a USB cable, but my computer doesn't seem to respond to it. Nothing happens. Can someone give me some pointers? Thanks!

Thanks so much, Ztcoracat, I did manage to get all the pictures printed out that I needed by using your idea of emailing them to my email address and then printing them out from there. Great idea and good advice!! Thanks again!!


Similar Content



Phone-to-computer Data Transfer From Samsung Convoy 3 With Mint 13

I was recently given a Samsung Convoy 3 phone as an insurance replacement. One of the phone's features is that you are supposed to be able to transfer data directly from the phone to your computer using a USB cable, but the phone's data transfer program (Mass Storage) has been hanging at the step where it contacts the computer. I am running Linux Mint 13, and I've determined that the operating system recognizes the phone when I plug it in, but it doesn't mount automatically. Verizon and Samsung have not been helpful.

Today I figured out how to mount and unmount the phone manually using mtpfs, but I wasn't sure what program to assign to open it, and the one I chose didn't work. Now I can't figure out how to change the program assignment -- no "open with" option comes up when I right-click on the icon on my desktop -- and I'm also not sure what program to use.

I'm willing to do the whole data transfer via command line if someone can walk me through it. I'm not very experienced with command-line prompts yet, but I've loved the ones I've learned so far.

Thanks!

Trying To Get Netgear Wireless USB Adapter To Work

I just built a computer and decided to give ubuntu a shot. It's a desktop, and hooking it up to Ethernet is a tad bit inconvenient as things stand, so I'm really reeling to figure out how to get this Netgear adapter to work. It's an AC1200, got it at Best Buy, and it comes with a CD with drivers for Windows. I don't seem to be able to install it.

This is my first post here and my first computer that I built, so I really have no clue if I've messed up somewhere down the line. That being said, I'd really appreciate if someone could help me with this one.

It looks like my kernel version is 3.13.0-32-generic and my Ubuntu version is 14.04.1, if that's important. I haven't messed with the settings at all yet, so pretend you're talking to a monkey that just installed Ubuntu with no idea what he's doing.

New Ubuntu Install...How To Recognize Cd, Dvd Players

New Ubuntu install....doesn't see cd or dvd players. Can't find how to access "Hardware" and "Properties" which typically list the hardware installed on desktop computer, in Windows by right-clicking when in "Computer".

Iphone Notrecognised By Ubuntu 14

I've downloaded ifuse and read and followed several instructions but cannot connect my iphone 4s to download pictures. I'm thinking it may be a hardware problem (usb?). There is no reaction to connecting the phone via usb cord. There's no instance of it in the file system.
Any help please. Thanks.

VAIO SVS1311... SteamOS Install.

Hello there! I'm completely new to linux; I've used ubuntu and other distributions but just at user level.
The problem is, I've got a Sony laptop with the inside H2O (3.9) BIOS, don't have the complete specs right now, but i can check them when i'm back at home. It has a NVIDIA 640M LE, 8gb ram, an Intel Core I7 processor, and a 750gb HD.
The screen, although working well enough, is broken, some plastic parts are broken also and it's not in good condition overall. It worked well in every aspect aside from those.
As i have a desktop, computer to work already, I don't need the laptop for working anymore, so I thought it could be a good idea to use it as an entertainment center in the living room, you know, for watching movies, playing some old-school games in local coop with and without emulators and so on.

I thought the still in beta SteamOS (Think it's a Debian-based distro) could be a nice option, so I've installed it. The installation process ran without issues till the first reboot; after that i only get "operating system not found" error and nothing else.
I unplugged the HD and made a complete installation from scrap with every reboot needed in my desktop computer and everything worked out fine: installing games, browsing the web, playing music, etc.
But, after plugging again the HD with the OS installed in the laptop I still get the same error; operating system not found.

Any ideas of how to solve it? Thank you in advance, and sorry about my english

Is A DHCP Router A Network Server?



I have several computers connected to a D-Link DIR605L router, two with ethernet cables and two through wifi. The Windows XP computer can see itself and nobody else. The Ubuntu (trusty) desktop and Ubuntu (lucid) netbook computers see nobody (unable to retrieve file list from server) and the Windows Vista computer only sees itself. Clearly, I have failed to configure something or a set of somethings.
Do I have to have one of the computers always on, acting as some kind of file server or can the router do this job? This is a new router. My old one (whose power supply went phut) connected everybody without arguing about it and we could share files around, even with a mix of OSs.
Since this is a local network only, I have no firewalls enabled, as far as I know ...
All of the network set-up posts I've found rabbit on about how to get your internet connection working through your router, which is not an option for me. I have dial-up working on the XP computer and a mobile wireless USB dongle for internet access on the trusty desktop.
I've installed samba and a few other packages, but so far, none of them have solved my problem. Can someone please tell me where to start and which tutorials to read? If I have to set up a computer as a file server, I guess it will have to be the XP thing, as it's the only one that is always running, but I'd like to avoid that, if possible, as I speak XP worse than I speak Ubuntu.
BTW, D-Link are no help at all, two hours on the 'phone and they were still trying to get me to connect to an ADSL service I don't have ...

Linux Accepped Address Needed For My Charge Controllers .

The two charge controllers for my solar system are connected to my router allowing my computer to access them for data gathering. Using the address required in Windows is "tsmppt13190256/" for one of them ( tsmppt plus the serial number ). This address works with all browsers with windows .

Using the same browser on various Linux machines yields "web page not found" Morningstar ,who makes these excellent controllers , says they support only Windows. I've tried using the numbered ( 4 groups of 4 digits ) equal and even the "tiny URL" but nothing works .

I've tried adding ".,com " and HTTP:// "

How can I how can I get my Linux browsers to accept this address ?

Thanks a lot .

Ralph

How To Open Linux File/software In Windows 8?

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

How To Install Mint Without Crying

i have ubuntu on my computer. i keep hearing about how great mint is so i want to duel install it with my current system. i have downloaded and burned the iso disk file to the dvd. NOW WHAT? there isnt anyone on the web says what to do next. do i boot up my computer and press install? is it a terminal command? do i book from the dvd? what am i supposed to do next. i want to have a duel boot on my computer of ubuntu and mint.
your clueless geek wannabe friend!

How To Disable A Gui On Boot

hello all at linuxquestions

first off would just like to say how useful this resource is, Ive been setting up a VM server in lubuntu recently and this site has given me alot of help and helped me get it off the ground. Im certainly a linux noob and only been messing around in linux for a week, so please forgive me for any derpy terminology

anyway, I installed lubuntu onto a VM as an intention to use it as a server
to be honest it was an ISO I had lying around and due to it being "light" I just went for it

however I have since discovered ubuntu do a flavour known as "ubuntu server"

first off..
what is the difference between ubuntu server and regular ubuntu/lubuntu etc?
is it just that it does not load a full fat gui?
if there is a big diffrence would it be easy to "turn" lubuntu into ubuntu server? since they are sort of based off each other?

secondly, lubuntu loads up lxde upon boot, I was wondering if there was a way for it to just boot up without the gui with the option to turn it on via shell (startx etc)
this is because I have little ram to play with but I also like to use the GUI sometimes when needing to do certain admin stuff, for example I use steam via Wine to download steam games sometimes

I was pondering the idea of installing ubuntu server and then downloading the lxde desktop and going that route, but Im not sure if it would bring any benefit opposed to just modifiying my current lubuntu installation

any advise or tips would be welcome

thanks!