Gpsr Error

Hi , i desinstall ns2.34 and i want to reinstall again so i was follow your step
$ tar xvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34/
$ patch -p0 < lwx+LTE+dccp+MPTCP.patch
$ export CC=gcc41 CXX=g++41 && ./install

and with this patch i add another patch for wimax "wimax-awg26_ns235.patch"

but when i install ns2.34 this erreur was showen
common/packet.h: In static member function ‘static void p_info::initName()’:
common/packet.h:402: error: ‘PT_WIMAXBS’ was not declared in this scope
make: *** [common/scheduler.o] Error 1
Ns make failed!

can you tell me where is the problem ???

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.


(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

Hi all,

i have installed ns-2.33 and also i have ns2.31_fhmip.patch.gz. How to patch ns2.31_fhmip.patch in ns-allinone-2.33/ns-2.33

when i tried to untar
it gave me error
PHP Code:
chase@chase-desktop:~/ns-allinone-2.33/ns-2.33$ tar -zxvf ns2.31_fhmip.patch.gz 
tar: This does not look like a tar archive
tar: Skipping to next header
tar: Exiting with failure status due to previous errors 



Thanks & Regards

Pon

hello
i installed sumo-0.9.8 and ns-2.35 in fedora 15. i want to use TraNS.
i know that TraNS no need to install. but it needs to be configured for using ns-2.
when i use the command patch -p0 < traci.patch
the error is appeared
Quote:
[root@Fedora-15 ns-allinone-2.35]# patch -p0 < traci.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** Makefile.in.2.29 2005-10-20 06:45:22.000000000 +0200
|--- Makefile.in 2007-09-11 13:46:57.000000000 +0200
--------------------------
File to patch: traci.patch
patching file traci.patch
Hunk #1 FAILED at 85.
Hunk #2 succeeded at 90 with fuzz 2 (offset -1 lines).
Hunk #3 succeeded at 152 with fuzz 2 (offset -2 lines).
Hunk #4 succeeded at 318 with fuzz 2 (offset -3 lines).
Hunk #5 FAILED at 345.
2 out of 5 hunks FAILED -- saving rejects to file traci.patch.rej
can't find file to patch at input line 74
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** common/mobilenode.h.2.31 2007-09-20 13:13:18.000000000 +0200
|--- common/mobilenode.h 2007-09-20 13:13:59.000000000 +0200
--------------------------
and when i use the command patch traci.patch
it needs too time to patch .(the traci.patch is 3kB).
what's the matter?

thanks

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html


After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:

g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:

bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.


Do you have any ideia how to correct this?

Thank you in advance.

i needs patch codes of GPSR ,GEOPPS GEODTN+NAV routing protocols of VANET NS2 patch codes. so please send me patch codes of these routing protocols in ns2 .thanks

Hi everyone,

I want to do some simulation of CR-MAC protocols under NS2.31-CRCN patch...

I installed crcn patch in NS2.31...

There are some MAC protocols given but they seem to be incomplete...

Can anyone guide me how to do the simulations of the given MAC protocols in NS2.31 using CRCN patch?
IS there any available online simulation document of these protocols using crcn patch...


Please guide me as I need it urgently...

thanks to all and one in advance.............

Hi mates,

I am trying to patch ospf in ns-2.34 i have downloaded the patch file from link:

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/

$ cd ns-allinone-2.34/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.34/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns ospf0.tcl

i followed the procedure from below LQ link post no #3

http://www.linuxquestions.org/questi...-a-4175492253/

it is successfully patchinf file but it is showing error when i execute ospf0.tcl file



Quote:
(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)



pls anyone suggest me ideas to get rid of this err.

Thanks in Advance,

Pon

I found that the mobiwan patch file only for ns-2.33.

If I want to run the mobiwan in NS-2.31 , anyone can provide the mobiwan patch file that can run in NS-2.31 ? In the same time , can provide me the method to install it in NS-2.31 ?

I will be really please if you can help me in this problem. Your reply will be really appreciated.

Thank you very much in advance.