OpenSuse Install Question

I have multiple computers to install Linux onto.

Some of my computers do not have DVD drives.

I want to boot Linux from C:, not the USB drive.

Do I download the ISO onto a C: drive.
Copy the image to the USB with the image mover.

My confusion is that this all seems to make a boot-able USB drive.

How do I install OpenSuse without having a DVD and end up booting from the C: drive?

Do I first have to boot from the USB?

I figured out there is a possibility that I can change the algorithm in the built-in cryptor, in the openSUSE install. The default algo loaded is AES and I want to change it to Twofish. I saw a post in gentoo's forums where it seems to be possible, although I don't know if I can do the graphic install after it nor how to procceed.

The command would be similar to:

Code:

cryptsetup -y --cipher twofish-cbc-essiv:sha512 --key-size 256 luksFormat /dev/sda3

What should I do? How to install the system afterwards? (with graphical install). Also, is there a way to check the encryption description after the system install?

I want to install openSUSE 12.3

I'm having trouble getting OS installs to work on this low-end laptop. I've tried Linux Mint, OpenSuse, Manjaro, Zorin OS Core 9 (32bit, 64bit and lite versions). My problem is that once installed, the graphics aren't rendered correctly or (with Zorin) the system would freeze right after logging in. Manjaro did install and work, but the screen was so dark it was unusable, even after adjusting the brightness levels. With Linux Mint, the compatibility mode worked perfectly using the live cd, but the graphics were too distorted once installed. OpenSuse also had distorted graphics. I just want to put the laptop to use until it dies on my.

I've tested the hard drive with the on board diagnostics and I've checked the memory. Neither of those tests gave any errors.

The specs a

AMD Athlon 64 X2 Dual Core TK-55
2 gigs of DDR2 memory
Nvidia GeForce Go 6100 graphics card.

Any help would be appreciated. I'm not an expert, so be gentle with the help and recommendations.

Good morning

I wanted to ask if someone can enlighten me in how to debug the pxe service. I have a pxe server that serves some images of linux flavors, the server is working fine in regards to the direct text and graphical installations. I have also some opensuse distro's that should be installable via ssh and vnc, if I am trying to perform this, nothing is loading anymore after the ready status(respectively after the kernel and initrd is loaded). the options for starting the ssh install are ssh=1, sshpassword=blabla, console=ttyS0,57600 and off-course initrd.

I verified the tftp server logs, everything is looking normal, the same as when the x11 or text installations that work perfectly, firewallis off. dhcp is offering an IP.

Is there some way to debug this issue, I have tried to find something on google but with no luck.

pxe server distro is opensuse 12,3

Thanks in advance.

I've just started tinkering with Linux and have a question about installing it to my current machine.

I'm running Win 7 Pro and have installed Oracle VM Virtual Box on the C:\ drive which is a 256 GB SSD. I want to create a 15 GB virtual hard drive on a second internal hard drive that has more space on it, and install Zorin 9.1 to it. Currently my C: drive is about 60% full and I'd rather not fill it up past that.

So my question is: Can I run Zorin off of a hard drive other than the C: drive?

Thanks for your consideration.

Dave

Hi all,

I must confess that I haven't posted for more than a year, although I have been reading the emails that your admin staff kindly sends me. I was just about to bother you with a question regarding installing and booting into Linux from a flash drive on laptop with no hard drive in it. However, I just discovered http://www.pendrivelinux.com/, so I'll post my questions there first, since they apparently specialize in this kind of installation. Of course, comments and suggestions here would also be welcome and appreciated.

Thank you,
Bob

Hi every One

I' like to install linux in my new laptop , I want to install a distribution based on Red hat Linux, so which one do you suggest to me (CentOS, OpenSuSe or Fedora). I've already an Ubuntu Debian based linux (I have Ubuntu 14.04 LTS installed in my second laptop).

Thanks a lot.

I'm trying to install Debian 7.8 on my eMac G4 (700mhz, 640 Mb RAM). I've tried multiple methods but I keep running into problems one way or another. Since my eMac only has a Sony CD-RW drive and a busted Ethernet port I can't install from a DVD nor a netinstall CD which would be the easiest options unfortunately. First I tried using the multiple CD option, which seemed promising at first; until I had to swap to the next disk during "configure the package manager". it won't eject the CD when I use the eject key on my keyboard (imac g3 pro keyboard so I go back to the main menu and select the "eject a CD from the drive" option at the near bottom then things seem to get clustered. When I tried inserting the next disk, nothing else will install. It keeps telling me I need disk 1 again through every step. Then at the end, it tells me the installation is complete before I even install a desktop environment from the final CD. Then I just end up booting into garbled text and errors.

After all of that nonsense, I tried making a bootable USB from the DVD ISO with the OS X terminal. This method usually works with just about anything I've done before. However for some reason Debian apparently simply refuses to boot. As I tried selecting it on the boot menu on the start up, it gives me a black screen then goes straight back to the boot screen with disordered graphics. When I tried booting it from open firmware, it goes to the first screen, then when I hit enter to actually boot to the installer, nothing but errors. Finally I tried booting it straight from the ISO file on the hard drive, that method didn't even work at all.

Could someone point out what I'm doing wrong if possible or perhaps recommend me a different option?

new computer from boxes, does not install nvidia driver
Booted from USB then ran YaST, I am new with OpenSuse but have two times before installed OpenSuse on fresh HDD's and Nvidia cards with ease.

The symptoms are like when I switched from a GTX 640 that only has mother board power to the GTX 750 Ti and needed power that I did not connect at first. Until I added extra power to the graphics card I only got a single low res VGA output. This 750 card definitely has power but still can only provide single low res to VGA output.

Terminal (dmesg) ......The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:1380)installed in this system is not supported by the 304.125 NVIDIA Linux driver release. Please see 'Appendix A - supported NVIDIA GPU Products' in this release's README, available on the Linux driver download page at www.nvidia.com. .... None of the VVIDIA graphics adapters were initialized!

Terminal (uname -r) 3.16.7-21 -default [OpenSuse version]

Terminal (/sbin/lspci) VGA Compatible controller: Nvidia Corporation GM107 [GeForce GTX 750 Ti] (rev 02)

have tried:
1. different power cables to graphic card
2. two GTX 750 Ti cards, neither work.
3. re-installed OpenSuse
4. removed card and mother board can run two monitors in high res. DVI cables are new and work. Monitors (4) are all AOC i2367 and working.

5. added to repository 'bumblebee' which contains NVIDIA drivers and tried rebooting. I am not good at repositories yet. However, I didn't need to do this twice before on new installs with NVIDIA cards.

6. downloaded from www.geforce.com file:///home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(1).run but when I run it error, "The file /home/shark/Downloads/NVIDIA-Linux-x86_64-346.72(3).run was opened with UTF-8 encoding but contained invalid characters."It is set to read-only mode, as saving might destroy its content.
Either reopen the file with the correct encoding chosen or enable the read-write mode again in the menu to be able to edit it."

Hardware list: Asus H81M-E motherboard, i5 4460 CPU, 550W power, Asus GeForce GTX 750 Ti graphic card,

Note: two graphic cards on hand, both work in another OpenSuse computer.

I am just learning Linux so I need simple step by step instructions.

Thank you in advance.

hello dear Linux-experts,


today i create a rescue-system for the emergency-situation:

i am creating a little resque-usb for SUSE-DVD on USB-Stick


aimed: to create a litle Rescue-USB while using Suse-ISO DVD on a USB medium 1:1 copied

step 1. Suse-ISO download:

he http://ftp5.gwdg.de/pub/linux/suse/o...-CD-x86_64.iso

step 2 copy the file onto a USB stick with the following command

Code:

dd if=openSUSE-13.2-Rescue-CD-x86_64.iso of=/dev/sdX bs=32k

where sdX=sdb or sdc is the USB stick


ready - now i can test the rescue-usb