MyHeritage-FamilyTreeBuilder Sw - Installation To Linux Nearly OK. - Small Problem.

Good day everyone,

I'm currently a student and as far as I'm aware I still need windows for some program I need, but I am going over to Linux.
(Thus I'm running Windows 8 at this moment)

Today I was going to install Ubuntu 14.04.01 alongside Windows 8, everything went well till I hit the 4th step (Installation type page) of the installation:

A message like follows showed:
"This computer currently has Debian GNU/Linux (Kali Linux 1.0.7) on it. What would you like to do?"

There are then 3 options available:
1) Install Ubuntu alongside Debian GNU/Linux (Kali Linux 1.0.7)
2) Replace Debian GNU/Linux (Kali Linux 1.0.7) with Ubuntu
3 and 4 is greyed out.
5) Something else (You can create resize partitions yourself, or choose multiple partitions for Ubuntu.

I just want to make sure what option to choose, I cant afford to lose all my data and windows.

Problem: Showing Kali Linux as current OS and not Windows 8.

Possible reason for showing Kali Linux as current OS:
I have a live CD of Kali Linux and ran it a few times in the past, but according to my knowledge it shouldn't have changed anything.

Maybe the 1st option is still the right one even though the current OS isn't listed right? Or the 3rd option is like a manual setting I guess.

Thanks for the time reading and helping!

Hi,

Could anyone please explain as understandable as possible how could I on my Windows 8 open either single file or install (and use) entire software which is supposted to work on Linux and/or Ubuntu? I have absolutelly NO experience with Linux and have never used it. Honestly, I don't know if there is any difference between Linux and Ubuntu. I want to be inside my Windows 8 while using Linux files/sofware. The only solution I could think of are actually two but neither of them is useful for me:

1. Vmware (i don't know how to use it)
2. Rent remote computer (vps/rdp) with linux OS installed (this would let me be in Windows 8 while being able to use Linux file/software [on remote computer] but sooner or later I would want to have Windows installed there too)

Tried program Linux Reader but didn't work on my Windows 8. Although I would need solution for installation/usage of software (that can be used only on linux/ubuntu), regardless of details***, the current problem is basically related to single files only: I have two files, both in IMG extension. Don't know how to open them because Deamon Tools doesn't handle IMG. The problem is that filesystem in one of them is "Linux" and filesystem in another is "142". The error I am getting when I try to open them is:

"File with harddrive/disc snapshot is corrupted."

But this is most likely because they are supposted to be used in linux environment, hence such question.

*** when i said "details" I was referring to basically anything: type of software, size, purpose, whether or not it needs network connection, whether or not it contains logging in (username password, etc) requirement, etc.

The following solution for current situation (quoted error above) works only partially:

http://www.sysprobs.com/simple-tip-h...thout-software

I am able to open/run/mount IMG if I do what is described on this link (im basically opening iso in this case - see the website) but when opening the virtual drive, the following error message proves that the file can be used in linux/ubuntu only:

"Windows cannot access that drive. Drive could be corrupted. Make sure the drive is in condition that can be recognized by Windows. If drive isn't formatted then format it before usage."

Would need detailed instructions, for total beginner, who has never used linux/ubuntu, what to do in such case: how to use in win8 files/software that are supposted to be used in linux/ubuntu. Also answer on how to open IMG would be highly appreciated.

Kindest regards and thank you a million in advance.

Hello,

I am working on a board (sbc6000x with at91sam9261 micro, linux 2.6.24 to be precise) and having some fun making script i wanted to make real application.
The board is coming with a cross compilation toolchain. When trying to make a simple "hello world" executable to print on the terminal there is no problem.
I open my terminal, give the path of the compiler, cd into the folder where my .c file is and then i type :
Code:

arm-linux-gcc -o hello hello.c

Which create my executable "hello" and this one is working. But like i said, this program only played with the terminal.

The board is starting with a script calling another executable which use the lcd display, i have the source of this executable. My idea was to look at what was in the source of this application (lots of folders and files) in order to understand how it was working. I wanted to test the toolchain on the source (with the makefile) to see if i was able to generate an executable from a application with folderS/fileS but when i try to "make" it i have this error.

In my understanding this is an object file but aside from that i don't see why it would not works.

Thank you for your future answers !

Hi,
I am very new to linux, and frankly I do not know a whole lot about computers in general, as I'm entirely self taught, and that was all on windows. I really like the idea and concept of linux and ubuntu, and am in the process of learning. I have recently installed Ubuntu 8.04 LTS on an ex Vista computer at work (upon the urging by the boss). I can give more information on the system if needed. However, I think the problem may not be with the system. This is what I got. I installed the o/s and started downloading the updates from the list. As I tried to install Samba and Wine, all of a sudden things started to become complicated. As I'm doing this at work, and everyone is excited to 'play' with this new o/s, someone tried to download limewire as well, when I was away. I didn't see the error messages at that point, but they apparently had some message about java, and tried to shut everything down. Now when I came back, I get this message:

E: dpkg was interrupted you must manually run 'dpkg -- configure - a' to correct.
Problem E: _cache->open()failed

So, not knowing much about linux and even less about using the terminal, I did open the terminal, and typed in: dpkg--configure-a and hit enter. Then it tells me that that command is not found.

I have followed some other posts that deal with this problem, however, all the remedies that worked for them did not work for me. I could use some help, please. My other option is to just reinstall the o/s all over and start new. Thank you.

hi everybody
I'm trying to install glomosim in fedora linux
I was following the guide to glomosim steps and I faced a problem in this step:

<< Now, you have to change some environmental parameters according to the destination folder which you put the Parsec.
You can create a file called “.bashrc” inside the root or home folder (if it does not already exist), and include the
following:
export PCC_DIRECTORY=/home/parsec
PATH=$PATH:$PCC_DIRECTORY/bin
export PATH
*Your PCC_DIRECTORY should be set to the targeted destination folder which you created earlier.
Now, type:
$ pcc >>

every time I tried to type pcc
this message appears : bash: pcc: command not found
anybody help me with this please

Hi ,

I'm new to Linux , I installed Kali linux on my pc and the wifi card isn't working ..

It is a usb wifi card , It has a cd for its driver. There is a folder in the cd called " Linux Driver " and here's what is inside it

First folder :

http://imgur.com/WTNgnEm

Second folder :

http://imgur.com/PyH07Cs

And here it is when I write lsusb :

http://i.imgur.com/NiPbbxSh.jpg

I'd like to know the steps to install it , Thanks in advance ..

Hi folks,

after googling for a couple of days, I get the feeling, this is a common problem. But the usual fix doesn't seem to work for me.

I am trying to install Linux on a separate partition of my Acer Aspire V5-573G. I used the Lili USB Creator to make a bootable USB drive with Ubuntu 12.04 on it.

when I reach the installation menu, it doesn't matter what I choose (start live, install..), my notebook will always freeze on a black screen.

I figured out how to add 'nomodeset' to the grub line. This does bring me one step further (the Ubuntu start screen) but then I get this message:

Code:

ubuntu@ubuntu:^^$ [   20.267422] mei 0000:00:16.0: init hw failure. 
[   20.267558] mei 0000:00:16.0: initialization failed.

After pressing enter I get a command line. From here I don't know what to do.

I've tried other distros (Lubuntu, Linux Mint), but then even 'nomodeset' didn't make a difference. I have also tried to add 'acpi=off' to the grub line after 'nomodeset', but again only black, even with Ubuntu.

Any suggestion or help will be greatly appreciated!

I'm running Xubuntu and it was a challenge just getting Copy.com on there. (I installed the desktop app on both of my computers.) Now that I have it though, I don't really know how to use it.

I know this is kind of more a Copy.com question, but I don't know anything about Copy.com (besides having it--lol) and besides, I like you LQ guys.

So yeah, I installed the desktop app for Copy.com on both of my computers. I know that if I put something in the Copy folder that will be available to both computers.

But how Copy does the backing up I don't know.

When I change a file or folder do I have to plop that into the Copy folder every time or does Copy somehow update the file or folder in the Copy folder automatically? (It doesn't seem to.)

Okay, when I, say, take the Documents folder from one computer and plop it into the Copy folder that's that. Then I take the Documents folder from the other computer and plop that into the Copy folder, then all the files from both folders will be in the Copy folder (and the Copy cloud), right?

Now I just removed a couple of files from a folder and copied and pasted the folder into the Copy folder. But then when I looked at the Copy folder the files I'd deleted were still there. What's the process? How does it work?

I mean, how does this work as a way of backing things up AND organizing things? To me it seems like a decent way of throwing stuff into the Copy folder (and cloud), but how is that different than Google Drive? I mean, that's not really a backup, is it? It's like a flash drive in the cloud.

And when I combined the same folders (with the same titles anyway, but they each had different files within them) from the two computers I'd expected each folder on each computer to have all the same files that were cumulatively on both. Instead, they're the same. And the cumulative is only on the Copy folder.

I like the notion of just throwing the folders and files into the Copy folder. It's much quicker than Google Drive. But the backing up feature eludes me and the syncing feature makes me fearful that I'll lose data or that the files will become hopelessly less organized.

Thanks.

What Is Linux Kernel?

Those who don't know what is the Linux Kernel they should know it because Linux kernel is the essential part of any Linux operating system. It is responsible for resource allocation, low-level hardware interfaces, security, simple communications, basic file system management, and more. Written from scratch by Linus Torvalds (with help from various developers), Linux is a clone of the UNIX operating system. It is geared towards POSIX and Single UNIX Specification compliances.

Latest Stable Linux Kernel Version 3.18.1
It's been a quiet week, and the patch from rc7 is tiny, so 3.18 is out.
I'd love to say that we've figured out the problem that plagues 3.17 for a couple of people, but we haven't. At the same time, there's absolutely no point in having everybody else twiddling their thumbs when a couple of people are actively trying to bisect an older issue, so holding up the release just didn't make sense. Especially since
that would just have then held things up entirely over the holiday break.
So the merge window for 3.19 is open, and DaveJ will hopefully get his bisection done (or at least narrow things down sufficiently that we have that "Ahaa" moment) over the next week. But in solidarity with Dave (and to make my life easier too let's try to avoid introducing any _new_ nasty issues, ok?]

To read all the changes and bugs fixed Download the changelog below -
Changelog

Why to Upgrade to the Latest Linux kernel

Recently in December Linux Kernel version 3.18.1 has been released and announced by Linus Torvalds. If you are using Ubuntu 14.04/14.10 or Linux Mint or any other debian/Ubuntu based then you can update to the latest kernel 3.18.1 to fix bugs, increase performance and security of the system.


Install Linux Kernel 3.18.1

Because it is not available via PPA, the needed deb packages of Kernel 3.18.1 are available via kernel.ubuntu.com. Follow the instructions for your system’s architecture exactly, in order to get a successful installation.

To install or update Latest Stable Kernel 3.18.1 on Ubuntu 15.04 vivid vervet, Ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS) , Linux Mint 17.1 Rebecca, Linux Mint 17 Qiana, Pinguy OS 14.04, Elementary OS 0.3 Freya, Elementary OS 0.2 Luna, Peppermint Five, Deepin 2014, LXLE 14.04, Linux Lite 2.0, Linux Lite 2.2 and other Ubuntu derivative systems, open a new Terminal window and bash (get it?) in the following commands:


For Linux system 32 bit :

Pass the following commands in the terminal to download the kernel file.

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

Install Linux Kernel 3.18.1


$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

For Linux system 64 bit :

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

Install Linux Kernel 3.18.1

$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

How To Uninstall Linux Kernel 3.18.1

If you come across any problem after installing/upgrading to linux kernel, can uninstall the newly installed kernel and switch back to old kernel.

$ sudo apt-get remove 'linux-headers-3.18.1*' 'linux-image-3.18.1*'

I have set up a SFTP which I can connect to, go to the right directory and read/write files to.

The full path is home/sftpuser/SFTP/Customer
The user "sftpuser" I am connecting with is in the group "ftpusers" which has read/write access.

That works fine.

Here is my sshd_config:
Code:

Match Group ftpusers ChrootDirectory /home/%u/
 ForceCommand internal-sftp
  AllowAgentForwarding no
  AllowTcpForwarding no
  X11Forwarding no

However, I made a samba share of the folder Customer, when I go to the IP adress on a Windows machine "\\10.0.0.1\" I can see the folder Customer, when entering it requests user/pass and afterwards gives an error: you have not the right permissions.

In Webmin:
Customer /home/sftpuser/SFTP/Customer Read/write to everyone

My smb.conf:
Code:

[global]
    syslog = 0
    log file = /var/log/samba/log.%m
    read raw = no
    write raw = no
    passdb backend = tdbsam
    workgroup = DOMAIN
    usershare allow guests = yes
    socket options = TCP_NODELAY
    pam password change = yes
    passwd program = /usr/bin/passwd %u
    unix password sync = yes
    obey pam restrictions = yes
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    server role = standalone server
    server string = %h server (Samba, Ubuntu)
    max log size = 1000
    map to guest = bad user
    panic action = /usr/share/samba/panic-action %d
    dns proxy = no



[Customer]
    force create mode = 755
    browsable = yes
    public = yes
    path = /home/sftpuser/SFTP/Customer
    force directory mode = 755
    writeable = yes
    valid users = @ftpusers
    force group = ftpusers
    write list = @ftpusers

I have been struggling for 3 days and am totally out of ideas.

LS -L for the folder:
Code:

total 4
drwxrwx---+ 2 sftpuser ftpusers 4096 Apr  9 11:35 Customer