I Tried To Full Install Puppy Linux 4.3.1 From Cd But Will Not Reboot Without Cd

Have completely low level formatted hard disk on an old pc created a partion run live cd successfully - puppy precise- and use the install wizard to install to the partition...frugal.
changed the bios to boot from hdd on reboot it seems that it is recognising the os but then a black screen with a flashing dash top left. any ideas?

I have installed linux(mint and ubuntu) on a few laptops, but i have an ASUS eEEE netbook PC..Atom processor...No DVD drive...

I have chosen PUPPY Linux distro, and I have booted from a thumb a few times to make sure everything seems to work....but...when I start trying to install...well...its asking me about using the partition tool to change the types of partitions that are best for linux...

I am not understanding the instructions...as far as what i need to do...has anybody done this install ,,,the current netbook OS is Windows Starter 7. I just want to REPLACE it entirely with linux puppy. I did not encounter this on my laptop installs..i just said yes...replace the current OS..but somehow the netbook install is acting different....do i need to change the partitions or can i just take the defaults...I forge the exact partition extentsions..something line ntfs and it says to change to ext2 and ext3...not sure how to do that...

Can some direct me to the best way to do this? thx.

Hi guys,

I'm new to this forum and linux too.
I thought of installing a lightweight distro of linux and did some research on the net where I found people recommending Puppy Linux. Plus it is (theoretically speaking) possible to run it from a USB (flash) drive which I decided to try out but it seems like it's not that simple a task as a lot of people (all over the internet) say it is.

What I tried so far is this: installing it into a thumb drive using unetbootin follwing a youtube tutorial (which basically showed how to download an iso of puppy, use unetbootin to make the thumbdrive bootable and install puppy on it). It didn't work. The USB wasn't recognized as a bootable device. I know for sure it can be booted from it since I tried ubuntu from the same USB and the same Laptop (which is able to boot from USB).

I thought that something with the Flash Drive not OK so I tried to use a windows installer to install puppy like other windows programms but this didn't work either. This time Puppy was recognized because there was an option to boot either Puppy or Windows 7 but when I chose to boot from Puppy nothing happens just a screen flash, some letters in the top left corner saying something like NTSC or NTSF (I can't read it properly because it goes away too fast) then after the screen flash the whole thing again (boot from win 7 or Puppy I choose Puppy again the flash... basically a loop).

Any ideas what I'm doing wron or what the problem is?

Thank You for any replies.

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

Hello all,

I am new to linux but not new to PC's.

I am self taught in everything i know so far.

I have an issue i am looking for some guidance on, i have burned an ISO copy of AVLinux & booted from the Live DVD.

chose to install on partition & created all the necessary file systems etc with GParted then proceeded with the install.

Completed install but when i try to boot no joy.

I have EasyBCD installed on Vista to manage to boot processes.

I am able to get to Grub4dos window & grub> prompt.

I have tried many commands of which i have identifeid the partition is there as correct filesystem, when running the /vmlin....TAB command it locates the name of the linux distro, if i set the drive partition to makeactive it boots up saying no operating system them have to change it back to Vista.

I have two pics that show the grub configuration reading from the live DVD, the install appears to have some missing or not right as opposed to the DVD, can anyone assisst how i can fix this issue?

Do i have to copy each file over manually from the Live DVD's folders?

Cant attach images here so here is the differeneces,

these are the listing on the Grub configuartion being read using the Live DVD,

1. /etc/grub.d
2. /boot/grub/device.map
3. grub-install
4. grub-mkconfig
5. grub-mkdevicemap--device
6. grub-mkfont
7. /boot/grub
8. /boot/grub/grub.cfg
9. /etc/default/grub

Here is what way they are on Live DVD,

1. Present
2. Present
3. Present
4. Present
5. Present
6. Present
7. Present
8. Yellow information bubble
9. Present

My install on partition,

1. Present
2. Yellow information bubble
3. Red X bubble
4. Red X bubble
5. Yellow information bubble
6. Present
7. Yellow information bubble
8. Yellow information bubble
9. Present

what do i need to do to remedy this?

i have attempted the install on couple of different drives, no success.

What Is Linux Kernel?

Those who don't know what is the Linux Kernel they should know it because Linux kernel is the essential part of any Linux operating system. It is responsible for resource allocation, low-level hardware interfaces, security, simple communications, basic file system management, and more. Written from scratch by Linus Torvalds (with help from various developers), Linux is a clone of the UNIX operating system. It is geared towards POSIX and Single UNIX Specification compliances.

Latest Stable Linux Kernel Version 3.18.1
It's been a quiet week, and the patch from rc7 is tiny, so 3.18 is out.
I'd love to say that we've figured out the problem that plagues 3.17 for a couple of people, but we haven't. At the same time, there's absolutely no point in having everybody else twiddling their thumbs when a couple of people are actively trying to bisect an older issue, so holding up the release just didn't make sense. Especially since
that would just have then held things up entirely over the holiday break.
So the merge window for 3.19 is open, and DaveJ will hopefully get his bisection done (or at least narrow things down sufficiently that we have that "Ahaa" moment) over the next week. But in solidarity with Dave (and to make my life easier too let's try to avoid introducing any _new_ nasty issues, ok?]

To read all the changes and bugs fixed Download the changelog below -
Changelog

Why to Upgrade to the Latest Linux kernel

Recently in December Linux Kernel version 3.18.1 has been released and announced by Linus Torvalds. If you are using Ubuntu 14.04/14.10 or Linux Mint or any other debian/Ubuntu based then you can update to the latest kernel 3.18.1 to fix bugs, increase performance and security of the system.


Install Linux Kernel 3.18.1

Because it is not available via PPA, the needed deb packages of Kernel 3.18.1 are available via kernel.ubuntu.com. Follow the instructions for your system’s architecture exactly, in order to get a successful installation.

To install or update Latest Stable Kernel 3.18.1 on Ubuntu 15.04 vivid vervet, Ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS) , Linux Mint 17.1 Rebecca, Linux Mint 17 Qiana, Pinguy OS 14.04, Elementary OS 0.3 Freya, Elementary OS 0.2 Luna, Peppermint Five, Deepin 2014, LXLE 14.04, Linux Lite 2.0, Linux Lite 2.2 and other Ubuntu derivative systems, open a new Terminal window and bash (get it?) in the following commands:


For Linux system 32 bit :

Pass the following commands in the terminal to download the kernel file.

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

Install Linux Kernel 3.18.1


$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

For Linux system 64 bit :

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

Install Linux Kernel 3.18.1

$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

How To Uninstall Linux Kernel 3.18.1

If you come across any problem after installing/upgrading to linux kernel, can uninstall the newly installed kernel and switch back to old kernel.

$ sudo apt-get remove 'linux-headers-3.18.1*' 'linux-image-3.18.1*'

After creating a bootable usb using Universal USB Installer. I booted up the sytstem (Dell Inspiron N4110) F12 boot on usb, did the install, everything went well until after copying files and then the error message that "The grub-pc package failed to install into /target.. So i continued without a boot loader and now am trying to figure out how to get it back.
Previously i did a perfect dual boot of Kali Linux wherein the Grub boot loader was present. I did however uninstall Kali, reclaim HDD space, and even use EasyBCD to remove Grub(i believe).
Also worth noting is that before this dual boot with pignuy and after uninstalling kali linux i did a complete reinstallation of my windows 7 system using the recovery HD.

Now i would like to know how i could get grub boot loader back onto my system so that i can boot up Pinguy OS. Thanks

Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.

i have an hp pavilion dv7 laptop and i installed openmandrivalx 14.1 x64 on it and cannot configure the wireless intel centrino wireless n-2230 adapter. Have downloaded the iwlwifi drivers but cannot install because the system cannot resolve the $MIRRORLIST problem.
This occurs on all mandriva based linux systems i hahe tried mageia with the same result. Mageia cannot even recognise the centrino adapter.
Ubuntu based linux systems install on the fly.
What good is an operating system in the modern era that you cannot connect to the internet seamlessly?

Hi!

I am running into a problem as stated in the title. I currently run Windows 8.1 on a Asus S300CA notebook. Not too long ago I installed and shortly after uninstalled Ubuntu 14.04 by simply deleting the partitions via Windows and recovering the original Windows Boot by running command prompt: "bootrec.exe /fixmbr" ... which consequently seemed to get rid of the grub loader.

Now I like to install Elementary Luna, but while installing the boot loader an error message pops up saying that the 'grub-efi' package fails to install into /target/.

After some research and not being able to find too much on the subject, I created an extra '/boot/grub/efi' partition of 100MB. Thereby selecting 'sda5' to mount/install the boot loader in that particular directory/partition. This has not worked and produced the same error message.

* Quick start disabled in Windows 8.1
* Running 'Try Elementary Lunar', the wifi hardware is detected but no signals are picked up, nor can I seem to connect to my landlord's router using their SSID (Just in case someone suggests doing something in the terminal requiring an internet connection.)

What to do? Your help is much appreciated.

* Edit: I just realized there is an entire forum dedicated to making Linux run on notebooks, laptops and netbooks. Mods, feel free to move this message.