Using Find And Pipe To Tar

Hi,

On Centos 7 I haven't been able to configure phpmyadmin. I've got Apache 2.4.6 and I've installed the latest phpmyadmin, both with yum.
I've changed all the 127.0.0.1 to my public ip and I've disabled the 'denied all' directives. This is how it looks:
Code:

Alias /phpMyAdmin /usr/share/phpMyAdmin
Alias /phpmyadmin /usr/share/phpMyAdmin

<Directory /usr/share/phpMyAdmin/>
   AddDefaultCharset UTF-8

   <IfModule mod_authz_core.c>
     # Apache 2.4
     <RequireAny>
       Require ip X.X.X.X
       Require ip ::1
     </RequireAny>
   </IfModule>
   <IfModule !mod_authz_core.c>
     # Apache 2.2
     Order Deny,Allow
     #Deny from All
     Allow from X.X.X.X
     Allow from ::1
   </IfModule>
</Directory>

<Directory /usr/share/phpMyAdmin/setup/>
   <IfModule mod_authz_core.c>
     # Apache 2.4
     <RequireAny>
       Require ip X.X.X.X
       Require ip ::1
     </RequireAny>
   </IfModule>
   <IfModule !mod_authz_core.c>
     # Apache 2.2
     Order Deny,Allow
     #Deny from All
     Allow from X.X.X.X
     Allow from ::1
</IfModule>
</Directory>

# These directories do not require access over HTTP - taken from the original
# phpMyAdmin upstream tarball
#
<Directory /usr/share/phpMyAdmin/libraries/>
    Order Deny,Allow
    #Deny from All
    Allow from All
</Directory>

<Directory /usr/share/phpMyAdmin/setup/lib/>
    Order Deny,Allow
    #Deny from All
    Allow from All
</Directory>

<Directory /usr/share/phpMyAdmin/setup/frames/>
    Order Deny,Allow
    #Deny from All
    #Allow from None
    Allow from All 
</Directory>

on /var/log/httpd/error_log:
Code:

AH01630: client denied by server configuration: /usr/share/phpMyAdmin

The httpd.conf hasn't been changed except this:
Code:

<Directory />
    AllowOverride none
    #Require all denied
    Allow from all
</Directory>

Normal access to my apache works fine (a default test page shows up)

SELinux is disabled and I've also stopped iptables to test it.

Please forgive me but I'm a little new to Red Hat (RHEL 5). I'm using rysnc to backup critical data and to a second disk; here is what I'm typing at the command line rsync -rvgal /data/disk1/share /data/backup/share. It appears that the softlinks are not transfered to the backup drive and some of the links point to data not located in the source folder (/data/share). After reading the rsync man page I was a little confused about the L option (vs the l option). In order to ensure that the linked files are moved should I type the below:

rsync -rvgaL /data/disk1/share /data/backup/share

A million thanks,
Johnny Mac

I have installed phpmyadmin , when access http://192.1010.118.0/phpmyadmin ,it pops the error

Code:

Forbidden

You don't have permission to access /phpmyadmin on this server.

I check the phpmyadmin.conf , I have released "allow all" to all directory .

I also check the /var/log/httpd/error_log, it have the following error , I tried change all files permission to 777 but still not work , would advise what is wrong in my server ? thanks

Code:

[authz_co error] [pid 2525] [client 192.1010.118.0:51878] AH01630: client denied by server configuration: /usr/share/phpMyAdmin

Hi. I've installed Arch Linux on a Wandboard running Logitech Media Server (LMS). LMS needs to read my music files off of a NAS network share. I can't figure out how to mount that network share.

I was told by someone who has a similar NAS to make the following entry in etc/fstab:

//192.168.10.15/media/Music /mnt/netdrive cifs noauto,x-systemd.automount,user=nobody,password="",iocharse t=utf8,noperm,nounix,nobrl 0 0

But when I start LMS and point it to /mnt/netdrive, my media/Music folder isn't shown. Is there a problem with the way I'm trying to mount the network share?

I've tried using "root" and "admin" as username and the admin password of the NAS as password, but still no luck. I've tried mounting the share manually, but I get a "permission denied" error.

Any help would be greatly appreciated.

I'm not sure if this should be in the newbie section, but I am somewhat of a newbie, so here goes:

In a home network, I have an Xubuntu file server with a Samba share that has me as the owner and authorizes me to access the share.

On another computer, I have Mint running and providing various services, including webdav on Apache with SSL. In the var/www/webdav directory of the Mint computer, I have the Xubuntu Samba share mounted. This is supposed to allow me to access the Samba share from the public internet.

Everything works fine except for one big problem: Apache requires the owner of the webdav directory to be user "www-data," and I can't figure out how to give www-data access to the Samba share, since www-data is not a user on the Xubuntu computer, and moreover I don't know the password for user www-data.

Can anyone figure out how to get around this problem? In particular, is there a way to configure the Samba share on the Xubuntu computer so that user www-data on the Mint computer can have access to it?

(Incidentally, I have my reasons for using two computers, one as a file server and one as a web server. Also, I am thinking about switching to NFS instead of Samba, but I'm not sure if even that would solve my problem.)

Hi

When i run this command manually on Centos 6.6 it works:

Code:

/usr/bin/find /backup/ -type d -mtime +1 -print0 | xargs -0 rm -rf

but as a cron job it doesn't as i can see a folder with files there from Mar 28:

Code:

55 5 * * * /usr/bin/find /backup/ -type d -mtime +1 -print0 | xargs -0 rm -rf

And here are the logs from cron that it is executing this at the correct time :

Code:

Mar 30 05:55:01 server CROND[9526]: (root) CMD (/usr/bin/find /backup/ -type d -mtime +1 -print0 | xargs -0 rm -rf)

Any ideas why?

Thanks

hi experts

I am rsyncing a user's home dir across the NFS and the local PC, but when it tries to copy over the hidden files it fails with permission denied. Both dir are owned by the proper user and I am root when I execute the script, so I am not sure what went wrong here.
For example: this is the content and permissions of the source:

-rw------- 1 user test 115 Nov 14 11:28 .bash_history

and here is my error:

rsync: send_files failed to open "/home/user/.bash_history": Permission denied (13)

Thanks

- I have samba server and ldap server both on different machine. I want to authenticate all the ldap user on samba share to giving access permission for user's on share. I have refer too many document for that but I am unable to access share with ldap user's username and password. I have referred below link

https://wiki.samba.org/index.php/Samba_&_LDAP

http://www.unixmen.com/setup-samba-d...-ubuntu-13-04/

How to troubleshoot for user authentication on samba share?

Im trying to copy a directory..

drwxrwxrwx 91 30001 dba 4096 Dec 23 23:40 11.2.0

cp -R 11.2.0 <location>/11.2.0


Error message:
cp: cannot read directory 11.2.0................
cp: seq_1: Permission denied
cp: seq_1: Permission denied
cp: seq_1: Permission denied

Hi Experts:

I'm new to Linux,recently i was confused with the words as below:

"To achieve sharing,the process A mmaps the executable file of process B into into the virtual address space of process A. As the Linux loader maps the executable files into the process when executing them,the two processes share the memory image of the mapped file"

questions:
1,What are the "executable files",are they ELF files?
2,How to do "mmaps"？if process A and process B share the same code segment, ,where is process A's own code segment?


Thank you in advance.