Problem With Honeyd Installation During "make" In Kali Linux

hey there
And again, I got stuck in this problem.
I could not find honeyd logs in var/logs/honeypot/
there isnt any file.

I ran the honeyd with "honeyd -d -f honeyd.conf"
it works in terminal. but there arent any logs at all.

root@kali:/etc/honeypot# honeyd -d -f honeyd.conf
Honeyd V1.5c Copyright (c) 2002-2007 Niels Provos
honeyd[6952]: started with -d -f honeyd.conf
honeyd[6952]: listening promiscuously on eth0: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip )) and not ether src 98:4b:e1:94:62:46
honeyd[6952]: [eth0] trying DHCP
honeyd[6952]: Demoting process privileges to uid 65534, gid 65534
honeyd[6952]: [eth0] got DHCP offer: 192.168.23.3
honeyd[6952]: Updating ARP binding: 00:00:24:8b:83:c3 -> 192.168.23.3
honeyd[6952]: arp reply 192.168.23.3 is-at 00:00:24:8b:83:c3
honeyd[6952]: Sending ICMP Echo Reply: 192.168.23.3 -> 110.44.116.18

after some research, i came to know that i should include "-l" to create logs.
but it showed me only this.

root@kali:/etc/honeypot# honeyd -l -d -f honeyd.conf
Honeyd V1.5c Copyright (c) 2002-2007 Niels Provos
honeyd[6960]: started with -l -d -f honeyd.conf
honeyd[6960]: listening promiscuously on eth0: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip )) and not ether src 98:4b:e1:94:62:46
honeyd[6960]: [eth0] trying DHCP
Honeyd starting as background process
root@kali:/etc/honeypot#

so what could be the issue? Urgent help needed.
thanks in advance
P.S I am a linux newbie.

hi there once again
Now I am getting this problem which running the cmd "honeyd -d -f honeyd.conf"
root@kali:/etc/honeypot# honeyd -d -f honeyd.conf
Honeyd V1.5c Copyright (c) 2002-2007 Niels Provos
honeyd[4726]: started with -d -f honeyd.conf
honeyd[4726]: listening promiscuously on eth0: (arp or ip proto 47 or (udp and src port 67 and dst port 68) or (ip )) and not ether src 98:4b:e1:94:62:46
honeyd[4726]: [eth0] trying DHCP
honeyd[4726]: Demoting process privileges to uid 65534, gid 65534
honeyd[4726]: [eth0] got DHCP offer: 192.168.23.2
honeyd[4726]: Updating ARP binding: 00:00:24:26:26:1d -> 192.168.23.2
honeyd[4726]: arp reply 192.168.23.2 is-at 00:00:24:26:26:1d
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1
honeyd[4726]: TTL exceeded for dst 224.0.0.22 at gw 10.0.0.1
honeyd[4726]: No reverse routing map for 10.0.0.1

what does it mean? because it starts to spam the terminal with such errors. or it is not??

I think, I have to edit the "honeyd.conf" file, but no clue.
the following is my honeyd configuration.

route entry 10.0.0.1
route 10.0.0.1 link 10.2.0.0/24
route 10.0.0.1 add net 10.3.0.0/16 10.3.0.1 latency 8ms bandwidth 10Mbps
route 10.3.0.1 link 10.3.0.0/24
route 10.3.0.1 add net 10.3.1.0/24 10.3.1.1 latency 7ms loss 0.5
route 10.3.1.1 link 10.3.1.0/24

# Example of a simple host template and its binding
create template
set template personality "Microsoft Windows XP Professional SP1"
set template uptime 1728650
set template maxfds 35
# For a complex IIS server
add template tcp port 80 "sh /usr/share/honeyd/scripts/win32/web.sh"
add template tcp port 22 "/usr/share/honeyd/scripts/test.sh $ipsrc $dport"
add template tcp port 23 proxy $ipsrc:23
add template udp port 53 proxy 141.211.92.141:53
set template default tcp action reset
# Use this if you are not running honeyd as 'honeyd' user:
# Debian-specific (use nobody = 65534 instead of 32767)
# set template uid 65534 gid 65534

create default
set default default tcp action block
set default default udp action block
set default default icmp action block

create windows
set windows personality "Microsoft Windows XP Professional SP1"
set windows default tcp action reset
add windows tcp port 135 open
add windows tcp port 139 open
add windows tcp port 445 open

set windows ethernet "00:00:24:ab:8c:12"
dhcp windows on eth0


urgent help needed please. thanks in advance

Hi, I am using a XML file in server location which contains some attributes and value.I just want to replace the attribute value inside the tag keeping the complete line and xml file intact. I am looking for Regular expression which can search for attribute name and replace the attribute value with the provided one. Please find below property details.

<server>
<mbean code="com.xyz.domain.wsmq.WSMQConnectionFactory"
name="xyz.qps:service=MQQueueConnectionFactory">
<attribute name="QueueManagerName">QMSTR01</attribute>
<attribute name="HostName">xx.yy.zz.ww</attribute>
<attribute name="Channel">channel01</attribute>
<depends>jboss:service=Naming</depends>
</mbean>
</server>

Hi, I've just recently installed MySQL connector/c from source code on my Slackware 14.1 x64

I read the official instructions of the connector but I felt a bit disorientated when I read:
Code:

1 -Change location to the top-level directory of the source distribution.

I interpreted that I have to go to the "highest" directory Code:

/

So I wrote: Code:

 
        #                            cd /

root@- /#                            tar xzvf /home/normal/Downloads/mysql-connector-c-6.1.6-src.tar.gz 

root@- /#                            cd /mysql-connector-c-6.1.6-src/

root@- /mysql-connector-c-6.1.6-src# cmake -G "Unix Makefiles"

root@- /mysql-connector-c-6.1.6-src# make 

root@- /mysql-connector-c-6.1.6-src# make install

Then I did:
Code:

ln -s /usr/local/mysql-5.6.25/include /usr/include

But when I try to compile a program in c with #include <mysql.h> i get this error:
Code:

# gcc ctemp.c 
In file included from ctemp.c:2:0:
/usr/include/mysql.h:57:27: fatal error: mysql_version.h: No such file or directory
 #include "mysql_version.h"
                           ^

What can I do? Thanks a lot and sorry for poor english

PD: If you need the official instructions I paste here the link: https://dev.mysql.com/doc/connector-...on-source.html

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth

Hi,

I installed ghostscript via yum package manager. Later I wanted a newer version of ghostscript and compiled it from source. "make install" placed the gs executable file under /usr/local/bin/gs. This works if I run the command with absolute path, but if try to run gs, the shell will output

"-bash: /usr/bin/gs: No such file or directory"

if I echo the path variable it will display

/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin

If i run whereis it will give me the correct path
gs: /usr/local/bin/gs

How do I make it work so that typing "gs" will run the executable file from the /usr/local/bin/gs?

(I am using Centos 6)

Thanks.

Hello, I have an embedded linux device. I can connect to the device and I can upload or download files. No problem with this. But, at first connection, I want to connect to "/" directory instead of "/root". In the device file system, there are files ssh_config and sshd_config under /etc/ssh directory. I think I have to do something with these files but I don't know what.

I don't exactly know what mean "/root" and "/" directories. I think that the real root directory is "/" directory which is empty but when I connect with filezilla, the "/root" directory is the default so I had to go back to / directory everytime.

Hai to all,

While am trying tp add in ldap database i am getting the following error.

[root@Testing openldap]# ldapadd -x -D "cn=Manager,dc=testdomain3,dc=com" -f yuvraj.ldif -w secret
adding new entry "dc=testdomain3,dc=com"
ldap_add: Undefined attribute type (17)
additional info: employeeNumber: attribute type undefined


[root@Testing openldap]# cat yuvraj.ldif
#Entry 1
dn: dc=testdomain3,dc=com
description: LDAPDB
objectClass: top
employeeNumber: 1000515
nationality: India
fn: yuvraj
sn: singh
sex: Male
age: 31
o: Cricket
ou: Batsman
displayName: singhy
uidNumber: 5155555
cn: yuvraj singh
userPassword: s


Please suggest.
Distro : CentOS 5.5







Thanks in advance..

Hello all,
i'm trying to upgrade my 2.4.x to 2.6.x ( on slackware 10.0)
i've experience of compiling 2.4.x to 2.4.x.

so the final steps were..........

make bzImage
make modules
make modules_install ( now here its showing error )

last lines of "make modules"
.........
LD [M] net/sched/sch_prio.ko
CC net/sched/sch_red.mod.o
LD [M] net/sched/sch_red.ko
CC net/sched/sch_sfq.mod.o
LD [M] net/sched/sch_sfq.ko
CC net/sched/sch_tbf.mod.o
LD [M] net/sched/sch_tbf.ko
CC net/sched/sch_teql.mod.o
LD [M] net/sched/sch_teql.ko
CC net/sunrpc/sunrpc.mod.o
LD [M] net/sunrpc/sunrpc.ko
CC sound/soundcore.mod.o
LD [M] sound/soundcore.ko

root@bond:/usr/src/linux# make modules_install
ln: when making multiple links, last argument must be a directory
make: *** [_modinst_] Error 1
...............


i used the "config" from the second cd of slackware 10.0.
inside somewhere in "testing" folder.


A person asked me this

Code:

Did you upgrade your module-init-tools?
It's necessary if you go from 2.4 to 2.6

the version for it is :
Code:

root@bond:/home/bond# depmod -V
module-init-tools 3.0
root@bond:/home/bond#

so i don't think i need to upgrade it.....

now experimently i tried to upgrade witheut loading any "config"
everything worked fine in that case...

so what could be the problem.........any problem with that "config"???

if required......i can post that "config" too.

regards

Hello every one
please I need your help to fix my problem to install ns2.33allinone on the ubuntu 10.10 in order to run ZRP protocol for security purpose.
before this time I install every thing correctly as follow
The steps I follow to run the ZRP on the Ubuntu 10.10 and Ns2-allinone-2.33
------------------------------------------------------------------
1. first install the Ubuntu 10.10 on VMwear and download the ns2.33 and exract it in the home directory

2.Ubuntu 10.10 - 32´ is old. you have to replace the text in /etc/apt/sources.list , to be able to install packages.
So you write
$ gedit /etc/apt/sources.list
After the file open remove all the text and past the following text instead it.
#
deb http://old-releases.ubuntu.com/ubuntu/ maverick main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security multiverse universe
#

Then save the file and close.

3.Write the following command to update the system
$ sudo apt-get update

4.download the two files from the following link and save it in the home directory

gcc41-compat , `gcc41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing
g++41-compat , `g++41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing

5.write the following command to install
$ sudo dpkg -i g++41-compat-4.1.2_i386.deb gcc41-compat-4.1.2_i386.deb

6.write the following command to update the packages
$sudo apt-get install libx11-dev libxmu-dev libxmu-headers libxt-dev libtool make automake autoconf g++

7. Download the ZRP from the following link and put it in the ns-allinone-2.33 directory
The latest "patch package" is zrp-ns233-patching.tar.gz
https://drive.google.com/file/d/0B7S...it?usp=sharing

8. After that you should follow the next steps
$ cd ns-allinone-2.33/
$ tar xvf zrp-ns233-patching.tar.gz
$ export CC=gcc41 CXX=g++41
$ ./install
$ cd ns-2.33/
$ sudo make install

9. Then you can download the example of the ZRP from the following link and run
ZRP examples : zrp-examples-2012.tar.bz2
https://drive.google.com/file/d/0B7S...it?usp=sharing

but now when i try to install it again i got this error
after i run "./install" command
#
============================================================
* Build tcl8.4.18
============================================================
configu WARNING: unrecognized options: --enable-gcc
checking whether to use symlinks for manpages... no
checking whether to compress the manpages... no
checking whether to add a package name suffix for the manpages... no
checking for gcc... gcc41
checking whether the C compiler works... no
configu error: in `/home/ali/ns-allinone-2.33/tcl8.4.18/unix':
configu error: C compiler cannot create executables
See `config.log' for more details
tcl8.4.18 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.
#

so please if any one can help me to fix this problem or give me any advice how to run ZRP protocol and the appropriate environment to run it
thanks in advance for your help