Finding Drivers For Canon CanoScan 4200F Scanner

I'm trying to get a Canon CanoScan 4200F scanner to work in both Kubuntu 12.04 and Calculate 13.6, and I've had no luck, using either SimpleScan or Xsane. The Canon website is no help; it simply says that Canon supplies no drivers for that device for any Linux distro. Does anybody know where to get drivers that work w\ Canon devices?

The following is the output from lsusb:
lsusb | grep -i 'canon'
Bus 007 Device 002: ID 04a9:221b Canon, Inc. CanoScan 4200F

Thanx in advance.


Similar Content



Drivers Para Impresora Canon I455

Acabo de instalar la distro mint 17.1 y encuentro drivers para instalar mi impresora Canon i455, en la pagina de Canon solo encuentro para windows y para iOs pero no para linux.
¿Podeis ayudarme?

Gracias

Trying To Use Zorin. Wrong Distro Choice? Advice Invited From Linux Experts

Hello Linux experts (because I suspect experts are what I need). Being a newbie I tried to choose a linux distro that I could use most like windows XP in particular, to include apps, maintenance and ease. To me it seemed like ZORIN fit the bill so I installed Zorin 9 on a 500 gb HD and configured a desktop with Cairo Dock (that dock being like the quick launch bar in Windows). So far so good.

Two main tasks I have is finding a back up (clone) utility I can use to clone the entire HD to an external USB HD so that I can simply plug in that clone and have the identical Zorin back exactly the way it was. Secondly I want to install my Canon printer (all in one print, copy, scan, and fax) so that I can use it the same way as with XP.

So far I've been disappointed for both because the clone apps I see available are "dd" (terminal) which does not seem to work and/or if it did the advice is that a clone could take days or weeks? Say what? Is that nuts or what. In windows I can clone my HD in 45 minutes, plug it in the computer and have an exact working copy of the source HD. Obviously days or weeks to obtain a HD clone is not good, and I'm not even sure that if I did it anyway that I would actually be able to plug it in (in place of the original HD),having an exact working copy of all files including boot, system, files and apps.

Next, installing my Canon printer seems unlikely if not impossible because I can't find drivers for that printer available for Zorin.

Did I make the wrong distro choice, and if so which Linux distro should I have installed? Ubuntu? Mint? Or maybe I'm looking for more in any Linux that can be had to date? Any advice please? Save me from having to go back to Windows which everyone knows (including M$oft MVP's)sucks.

"Urgent"

I am one day old with Linux (no diapers yet either). I have downloaded Zorin 9.0 after some trial and error but successful, yesterday 2/25/2015 I purchased the Zorin 9.0 Ultimate went through the download process from the web and POOF!!!!!!, nothing, nothing, can some one help me go through the steps and download Zorin 9.0 ultimate. I am also unable to download from any disk on this OS, I have tried to download the Canon Printer with their software with no success. You can send your reply to my e-mail address. THANKS.

Hello &I Have A Printer Problem

I have very recently installed Linux Mint 16 (Cinnamon) and after a hard slog managed to get wifi and my printer (Canon Pixma MG5550) installed and operating.
My problem is in Libre Office printing labels on an Avery J8162 sheet of 14 labels. I have raised a new document and had the address typed on all 14 labels (same name & address on all 14)but when printing to the actual label sheet the addresses are okay on the first line only and then progresses down the sheet printing outwith the label.
I have checked all settings and verified that they conform to what I need. Now dont know what to do and if anyone can help then I would appreciate your response.
Thank you
Tikiman

Printer Problems Canon IP4500 And Ubuntu 109

Hi there. I'm new to Linux. My son installed it. First, I was pleased. Then I was angry: we have three printers in the house. It was incompatible with them all (when I connected the printer, it did not automatically install it. Now I'm frustrated. I have been to sites to find out what version of Linux I have. I am not a techie. I worked out how to get into the black terminal screen. I worked out how to write the command uname -a and got the answer Ubuntu 109. I don't know what this means but I then worked out how to put a command in $ sudo apt-get install cnijfilter-ip4500series to install the printer. It asked me for my password. I entered the password I use to open the user interface when I turn on the laptop. No dice. I need to distribute posters this pm. I will have to spend more money, going into town to get them from there. Not great. Any help appreciated. Advice, guidance, kind words of encouragement....

WiFi Dongle Don't Work

I have a WiFi dongle that said to support GNU/Linux, however no drivers were found on the CD, after hours of research i found this and installed the driver, I'm pretty sure my device is listed as supported, but the device is still not recognized, it is listed on lsusb command, but not recognized by any WiFi program like WiFi Radar and wireless-tools, also when i use the iwconfig command, this is what i see, i really need this wireless connection working, can you help, please?

Block Device Drivers

I am new to drivers development under linux kernel. After starting with the simple examples from the book Linux Device Drivers v3, I realised that the block driver API has been totally changed since the kernel 2.6.31 or maybe later versions, and I couldn't find any documentation about the new API and how to use it. There are just some few comments in the source code.

After struggling for one month I almost had something working but few parts are missing or I misunderstood something.

Here is the situation :

After fetching the request with blk_fetch_request(q), I use the macro __rq_for_each_bio for handling the full request
To transfer the segments one by one I use the macro bio_for_each_segment(bvec, bio, i) that loops over all the segments in a bio

My question is :

I need to do some DMA from/to my device (the dma engine is within the device), that's why I need some address that I could use it to DMA from/to
Which buffer should I use ? for the moment I use the buffer returned by char *buffer=bio_data(bio), Does "buffer" corresponds to the physical buffer that I can use for DMA
How to end the request in this case ? using __blk_end_request_cur(req, 0) ? or using __blk_end_request(req, 0, bytes) ?

If you don't have an answer to any of these questions, where can I find a useful documentation for the new API of the block device drivers.

New To Linux *again* - I Have Some Questions About Making Better Distro Installs

I am a basic computer user as far as operating systems are concerned. I do a little programming here and there but nothing special yet.

I have tried Linux many times, but I'm always left to getting *another* distro, after I fail to properly install Linux. Basically I resort to simple installs and found that Linux Mint and Ubuntu, most of the time work out of the box. However, after an installation, ... here and there I get error messages and sometimes crashes and i understand that my installation is not stable, simply because I did not properly configure some conf file or similar.

Another even more important problem I have is device drivers. Working from the command prompt (console) and the GUI is very confusing to me. I'm not sure if I'm setting something right with one and then unsetting it with the other. So basically I'm here with some noob questions and a couple specific ones.

1. Can someone recommend a good distro to learn to correctly configure drivers with manually. Remember, that I understand that there are distros that work out of the box mostly, but I actually am not worried about complexity as far as someone can guide me through errors. Which will lead to more questions of course.

2. After an installation there are sometimes a dozen errors during bootup, but no stops. Since it all scrolls by fast (most distros), where can I check after bootup what I need to fix?

The Goal is an *error free* stable installation of a linux distro, with enough common sense learned to take it to other distros.

How Do I Install FTDI Drivers In Debian?

Hi all

I need help with the above topic as i have followed the instructions on the FTDI website but have had no luck in getting my device to communicate with my machine. dmesg reports it has found the device at ttyusb0 and recognises it as a FTDI device, but when i scan my ports with my program it does not detect it. the program is Tuner Studio and my device is a Megasquirt EFI controller.

thanks,

Please Help Me Develop My Laptop Into Something Better.

I have a Dell Latitude E5440. It currently is Running Windows 7 pro. I want to change this machine into a customized Linux Workstation. In order to that right I need to get all my device drivers copied from Dells Website I want to then figure out if these drivers would work for linux.
I then want to create a virtual windows desktop to run all and not limited to:

Microsoft visual Studio
Ableton live (DAW)
Auto Desk Inventor
Mentor Graphics PAD
Adobe Photoshop
Adobe Premier
Red Giant Special Effects suites (various)
Quark Express
ICOM Radio Programming software
Microsoft Office
Just to name a few programs I want to run on my windows virtual desktop.
I wont ever take the virtual desktop online. I also want to have a highly secured system where permissions have to be signed for anything. Meaning that my windows desktop is virtually helpless in screwing with the rest of my system.

SO I will need a good open source O.S. and many links for the device drivers I need and how to change them to work.

Please explain things clearly with precise directions and links. I haven't flashed my bios yet and installed DBAN. I will when I feel I have all my ducks in a Row and I am ready to create a monster laptop. please email me directly
evander.callie at gmail dot com