Linux Mint 17.1 Partition And Installation

Hi all. My first time post and very new to linux.
I am using linux Mint Debian version.

My goal is to auto mount 2 external harddrives (Each hard drive is 2TB) attached to the 2 usb ports on my asus wireless router model rt-n56r.

I have succeeded in auto mounting my first drive HDD1 by configuring fstab file:

//192.168.1.1/HDD1 /media/public cifs username=**,password=**,rw,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

At boot this partition is mounted without issue.

In attempting to mount the second hard drive HDD2 I added another entry in fstab as follows:

//192.168.1.1/HDD2 /media/public cifs username=**,password=**,rw,nounix,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0

It appears that both HDD1 and HDD2 mount however, when entering the partition only files and directories of the second hard drive appear.

So I changed the mount point in the second hard drive to reflect /media1/public1 and after the configuration neither hard drive appears to have mounted.

I tried using UUID instead of path to partition but cannot get even 1 attached hard drive to mount.

I appreciate in advance the help and assistance to my query.

I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....

When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.

Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.

I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.

Thank you in advance for reading through this and for any help offered.....

Mikey

I am installing Linuc Mint Rebecca on this computer: CPU: I7, motherboard: ASUS X99-A, HD: 2x 2TB, motherboard BIOS RAID1, so the total hard drive size is 2TB

While I was installing LINUX MINT on RAID1 hard drive, the installation system pop up ??? ???windows at Wher Are You step, after I click OK, jump to Installation Type, no matter which type I select: Erase disk and install Linux Mint or Someting else, ??? error message pop up at Where are you.

And if I click either of the two disk, it shows "Unable to mount location"

however, I can double click and see the content of RAID1 2TB disk.

Question: what's the problem of LINUX MINT installation on RAID1?

How can I make this Data partition be readable and writeable? I tried the "chmod 777" command, but was unsure of what directory to type in . I tried several but the command wouldn't start. This partition is on the second hardrive. I am just trying to get more storage on the second hard drive, so I hope I partitioned correctly. The drive was originally mounted as usr, but I managed to shrink that and make a new partition named Data.

Dear Linux magicians

When I tried to partition my hard drive for installing Debian Wheezy, I get the error:

For unknown reason it is not possible to change the size of my partition. Check /var/log/syslog or look at he fourth virtual console (VT4)

Obviously I have no idea what this all means, clearly I'am a beginner. Excuse me for my bad English, I'm not a native or regular speaker. I have to install Debian for school...

Kind regards

ITstudent

I recently bought a WD external hard drive for storing file of several types. Using gparted I made two partitions, one ntfs for windows files and an ext 4 for linux files. Strangely, I have complete access to ntfs partition from linux side of duel boot system, but do not have permission to access ext4 partition. My root password does not work when I use su to gain root access. It works fine on built in hard drive.

I've made a couple attempts at installing these OS's on my machine and am still not getting it. I've actually been using AVLinux for about the past nine months, and it's working fairly well. And, yes, I know XP is down for the count, but for the moment it's the only MS option available to me - and I *need* to get it running for some work related web stuff...

This is all on a 32 bit AMD system btw.

What I've tried: Everything on one SATA drive. Partition one formatted to NTFS (about 20GB) for XP. Partitions 2 and 3 are Root and Home for AVLinux, Partition 4 at the end of the drive as the /swap for AVL.

All the how-to's and guides I've been able to come across point to (usually) Mint or Ubuntu's install dialog, and to select "something else" - which, by the way, is not a function of AVLinux's installation procedure. During install you can install GRUB to the MBR *or* root partition..

So, just to clarify to procedure (as I might have it now, but am very unsure) XP gets installed first (which is done at this point...) then my Linux distro *to the MBR* (?) then I need to add a stanza to GRUB telling it where XP lives? XP is not showing up on GRUB as I'm doing it, but I'm not too sure if installing Linux to the MBR (on the same physical drive as XP) actually wipes out the Windows bootloader....and if so, how chainloading would actually work...

So, any help appreciated, thanks.

Hi folks,

as my title says, i need to protect an ext3 partition in my external 500GB toshiba usb hard diks. it is a 250gb Partition. so if i try to open the partition on any linux or windows system (using a utility), it should ask for a password to open the partition. pls advise.

Hi all,

As you can probably tell I am new to Linux and new to the forum, I am using Kali and Mint both as live Linux environments on USB drives, all is good and I am finding my way around, the reason for the post is that I need to copy 15 CF cards that have multiple partitions, Windows isn't really an option as it can only see one partition on a removable drive, so here goes with Linux.

The CF cards contain Windows Embedded XP in one partition and a separate partition for user data which isn't protected, not that the contents matter, only the fact that it is bootable with multiple partitions, the object is to upgrade the old 2gb cards to 4gb cards to add an additional program on the embedded drive, but they are both full.

as long as I can copy both partitions over the partition size doesn't matter as I can resize that if necessary, but I need both partitions to copy over to the new drive.

I have read that dd command is the way to go but cant find much on multiple partitions which display in Linux as two drives, so how do I go about this, any pointers

Ideally I would like to automate the process as this is something that we could end up doing on a regular basis, I have seen a USB drive that was plugged into a PC and through a basic GUI allowed you to copy a HDD but I don't know If that would do both partitions, something for the future?

How do I convert a single hard drive to GPT without losing data and without re-installing.

Current systems
Windows 7 Partition /dev/sda1 (Primary)
xubuntu 14.10 /dev/sda5 (Logical) (maybe upgraded to 15.04 when released)
Swap /dev/sda6 (Logical)

I read some guides they were not clear. They also said it is better to do a clean install of each system. None of the guides give a step by step, they always leave something out.

I am not turning on secure boot but I am turning on uefi.

I have a Mini-partition wizard boot cd that can help out but wouldn't covert a system partition.

I have a way to make an iso for xubuntu 14.10


When do you turn on UEFI in the bios before or after converting drive?





Mod, please move to correct forum if needed