lsmod is command to list loaded modules and I referred man page of lsmod that shows it refers to /proc/modules file. In terms of my os platform, Ubuntu, almost available modules are in /lib/module directory. I think OS kernel naturally loads modules in there. So, What does kernel refer to load modules at boot time?
Is there any files to be refereed for loading or mechanism can't know easily for end user?
Hello,
the "lsmod" give the list of the loaded modules/drivers.
How to know when was theier loading time (start/end) ?
Is there any existing log file where that information can be seen ?
For another topic, see http://www.linuxquestions.org/questi...ml#post5362257, I am thinking the unfinished loading of a specific module (ehci-pci or other pci driver) or the loading of a module before another one, could disturb the loading of a module e1000e during a cold boot.
Thanks a lot for any help.
Printing a bootchart? http://www.bootchart.org/images/bootchart.png
Something else?
OK,
Lastnight I decided to finally attempt to install the dedicated ATI/AMD Catylist drivers. After all I was successfull with the HP drivers, right...
No matter which grub selection I make, getting in is broken, except of course for the Windows XP Pro x64 entry, that works just fine. I'm here with you today, because of the Fedora 21 Live DVD, (slooooww).
Here is the drivers log file:
==========================================================
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: ERROR: Module radeon is in use
Unloading drm module...
rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper radeon
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.18.3-201.fc21.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:6396:12: warning: ‘KCL_fpu_save_init’ defined but not used [-Wunused-function]
static int KCL_fpu_save_init(struct task_struct *tsk)
^
CC [M] /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_Slot_No_Hotplug’:
/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:845:21: error: ‘struct acpi_device_flags’ has no member named ‘no_hotplug’
tdev->flags.no_hotplug = true;
^
scripts/Makefile.build:257: recipe for target '/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o' failed
make[2]: *** [/usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o] Error 1
Makefile:1385: recipe for target '_module_/usr/lib/modules/fglrx/build_mod/2.6.x' failed
make[1]: *** [_module_/usr/lib/modules/fglrx/build_mod/2.6.x] Error 2
make[1]: Leaving directory '/usr/src/kernels/3.18.3-201.fc21.x86_64'
Makefile:88: recipe for target 'kmod_build' failed
make: *** [kmod_build] Error 2
build failed with return value 2
[Error] Kernel Module : Failed to compile kernel module - please consult readme.
[Reboot] Kernel Module : dracut
==========================================================
I just rebooted without attempting to configure the card, as per the ATI/AMD warning stating that it's important to do so, because my thinking was derailed due to seeing errors, and the install program said I needed to reboot. Afterall, I just couln't believe that with a "Failed to compile kernel module" error, it would actually keep the changes I'd made, that surely Linux had a failsafe in place for such circumstances. In other words, I'm also a newbie, and just don't know how many hoops of fire one has to jump through to be at peace with linux.
Can anyone please help be get back into my install, I've already set up so many things, there's just got to be a way, right?
Thanks in Advance!
JustAnotherHuman
Hi folks,
I'm trying to install the drivers for my "legacy" nvidia graphics card.
I've downloaded the file from nvidia's website to install the driver, but during the process I get this message...
Kernel header file ' /lib/modules/3.13.0-37-generic/build/include/linux/version.h ' does not exist .
The most likely reason is the kernel source files in ' /lib/modules/3.13.0-37-generic/build ' have not been configured.
Anyone know how to configure this file? I've been working on this for a few days now...it's getting old!
Thanks for your help.
Joe
i installed linux real time but i can't run modules because i can't locate rtl.mk file that is needed to run rt modules
so plz any help???
is there other way to run rt modules without rtl.mk file???
thanx in advance
I have installed Linux 3.5 kernel and have compiled e2fsprogs as well. I have my own version of ext3 file system - lets say it is myfs. I have compiled myfs as well. Now I have few questions:
1.How to insert myfs module and where? When I do modprobe myfs (.ko file) it says module not found. When I simply do insmod myfs.ko it works but I am not sure where is it putting the .ko file. Also the displays I have added (on mkdir call) are not showing up (kernel debug level is also set to 8) when I try to create a directory in mounted folder
Makefile in myfs directory looks like this:
KERNEL_TREE ?= /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
obj-m := iext3.o
iext3-objs := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o \
xattr.o xattr_user.o xattr_trusted.o acl.o xattr_security.o icefs.o \
transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o
all:
make -C $(KERNEL_TREE) M=$(PWD) modules
clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions *.markers *.order *.symvers
and I am compiling myfs from my own directory: /home/myname/soft/myfs.
Also, I don't see any ext2/ext3/ext4 directories in /lib/modules/linuxversion/kernel/fs/ -- not sure if this is right or wrong.
2.Mount is working fine. I can see myfs is mounted on /dev/sda3 by doing df -a. When I unmount It says - umount: /home/..../mnt: not mounted and then if I do df -a the file system is unmounted. This is strange as its unmounting but still throwing error.
Some Background: Directory where I have everything: /home/soft myfs/ mye2fs/ Linux-3.5/ mnt/
Step1: cd Linux-3.5 --> 1) make 2) make modules 3) make modules_install 4) make install 5) reboot
Step2: compile myfs (my version of ext3) and insert the myfs kernel module --> cd myfs/ --> make --> insmod myfs.ko
Step3: compiled mye2fs for mkfs
Step4: use mye2fs to create myfilesystem on a device --> mount --> test printk statements put under myfs modules
I want to try using iso_8859_15 and codepage 850 (I use iso_8859_1 and 437 now.) I build the modules for all 4 but none of them load. I loaded the modules for iso_8859_15 and 850 but they went unused. I don't see anything in my startup scripts or logs about NLS or codepage.
Hello! Who can help me? I remenber this problem have never occured when I was using CentOS 6.4. This time I am using Fedora 19 and problem occured as follow.
[ultrabird@PanFu Downloads]$ ls
dnw-linux-v1.01.tar.gz xdnw-0.5.1.tar.gz
[ultrabird@PanFu Downloads]$ mkdir dnw-linux && tar -zxf dnw-linux-v1.01.tar.gz -C dnw-linux
[ultrabird@PanFu Downloads]$ cd dnw-linux/
[ultrabird@PanFu dnw-linux]$ ls
dnw.rules logo.png Makefile README src
[ultrabird@PanFu dnw-linux]$ cd src/driver/
[ultrabird@PanFu driver]$ ls
Makefile secbulk.c
[ultrabird@PanFu driver]$ make -C /lib/modules/`uname -r`/build M=`pwd` modules
make: Entering directory `/usr/src/kernels/3.10.10-200.fc19.i686'
CC [M] /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.o
/home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.c: In function ‘secbulk_write’:
/home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.c:60:96: warning: comparison of distinct pointer types lacks a cast [enabled by default]
to_write = min(len, BULKOUT_BUFFER_SIZE);
^
Building modules, stage 2.
MODPOST 1 modules
CC /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.mod.o
LD [M] /home/ultrabird/Downloads/dnw-linux/src/driver/secbulk.ko
make: Leaving directory `/usr/src/kernels/3.10.10-200.fc19.i686'
[ultrabird@PanFu driver]$ ls
Makefile Module.symvers secbulk.ko secbulk.mod.o
modules.order secbulk.c secbulk.mod.c secbulk.o
[ultrabird@PanFu driver]$ sudo insmod ./secbulk.ko
[sudo] password for ultrabird:
[ultrabird@PanFu driver]$ dmesg | grep secbulk
[ 438.172811] secbulk: module verification failed: signature and/or required key missing - tainting kernel
[ 438.174533] secbulk:secbulk loaded
[ 438.174660] usbco registered new interface driver secbulk
[ultrabird@PanFu driver]$ uname -a
Linux PanFu 3.10.10-200.fc19.i686 #1 SMP Thu Aug 29 19:25:53 UTC 2013 i686 i686 i386 GNU/Linux
dnw is a download tool for ARM. Maybe secbulk is it's driver. I don't know much about it. Any help would be appreciated. Thanks!
When I start the VMware Player on Fedora 21, I am unable to execute the VMware Player 10. It is throwing errors at me.
Here is the error message log when I run the VMware Player GUI startup.
Any help is appreciated. Thanks
Code:
2015-04-16T07:14:16.917-08:00| vthread-3| I120: Log for VMware Workstation pid=4108 version=10.0.4 build=build-2249910 option=Release
2015-04-16T07:14:16.917-08:00| vthread-3| I120: The process is 64-bit.
2015-04-16T07:14:16.917-08:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2015-04-16T07:14:16.917-08:00| vthread-3| I120: Host is Linux 3.19.3-200.fc21.x86_64 Fedora release 21 (Twenty One)
2015-04-16T07:14:16.917-08:00| vthread-3| I120: Msg_Reset:
2015-04-16T07:14:16.917-08:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2015-04-16T07:14:16.917-08:00| vthread-3| I120: ----------------------------------------
2015-04-16T07:14:16.917-08:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-04-16T07:14:16.917-08:00| vthread-3| I120: Msg_Reset:
2015-04-16T07:14:16.917-08:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/asif2k/.vmware/config": No such file or directory.
2015-04-16T07:14:16.917-08:00| vthread-3| I120: ----------------------------------------
2015-04-16T07:14:16.917-08:00| vthread-3| I120: PREF Optional preferences file not found at /home/asif2k/.vmware/config. Using default values.
2015-04-16T07:14:16.917-08:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-4108.log
2015-04-16T07:14:16.928-08:00| vthread-3| I120: Obtaining info using the running kernel.
2015-04-16T07:14:16.928-08:00| vthread-3| I120: Created new pathsHash.
2015-04-16T07:14:16.928-08:00| vthread-3| I120: Setting header path for 3.19.3-200.fc21.x86_64 to "/lib/modules/3.19.3-200.fc21.x86_64/build/include".
2015-04-16T07:14:16.928-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:16.929-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:16.929-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:16.929-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:16.938-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:16.938-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Reading in info for the vmmon module.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Reading in info for the vmnet module.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Reading in info for the vmblock module.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Reading in info for the vmci module.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Reading in info for the vsock module.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Setting vsock to depend on vmci.
2015-04-16T07:14:17.122-08:00| vthread-3| I120: Invoking modinfo on "vmmon".
2015-04-16T07:14:17.125-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2015-04-16T07:14:17.125-08:00| vthread-3| I120: Invoking modinfo on "vmnet".
2015-04-16T07:14:17.128-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2015-04-16T07:14:17.128-08:00| vthread-3| I120: Invoking modinfo on "vmblock".
2015-04-16T07:14:17.132-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2015-04-16T07:14:17.132-08:00| vthread-3| I120: Invoking modinfo on "vmci".
2015-04-16T07:14:17.135-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2015-04-16T07:14:17.135-08:00| vthread-3| I120: Invoking modinfo on "vsock".
2015-04-16T07:14:17.139-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2015-04-16T07:14:17.154-08:00| vthread-3| I120: to be installed: vmnet status: 0
2015-04-16T07:14:17.154-08:00| vthread-3| I120: to be installed: vmci status: 0
2015-04-16T07:14:17.172-08:00| vthread-3| I120: Obtaining info using the running kernel.
2015-04-16T07:14:17.172-08:00| vthread-3| I120: Setting header path for 3.19.3-200.fc21.x86_64 to "/lib/modules/3.19.3-200.fc21.x86_64/build/include".
2015-04-16T07:14:17.172-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.172-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:17.172-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:17.172-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:17.182-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.182-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.364-08:00| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.19.3-200.fc21.x86_64/build/include
2015-04-16T07:14:17.364-08:00| vthread-3| I120: Update kernel header path to /lib/modules/3.19.3-200.fc21.x86_64/build/include
2015-04-16T07:14:17.364-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.364-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:17.364-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:17.364-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:17.374-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.374-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.375-08:00| vthread-3| I120: Found compiler at "/usr/bin/gcc"
2015-04-16T07:14:17.380-08:00| vthread-3| I120: Got gcc version "4.9.2".
2015-04-16T07:14:17.380-08:00| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-04-16T07:14:17.380-08:00| vthread-3| I120: Using user supplied compiler "/usr/bin/gcc".
2015-04-16T07:14:17.384-08:00| vthread-3| I120: Got gcc version "4.9.2".
2015-04-16T07:14:17.385-08:00| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-04-16T07:14:17.390-08:00| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.390-08:00| vthread-3| I120: No matching PBM set was found for kernel "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.390-08:00| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-04-16T07:14:17.390-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.390-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:17.390-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:17.390-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:17.400-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.400-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.401-08:00| vthread-3| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-04-16T07:14:17.401-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.401-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:17.401-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:17.401-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:17.411-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.411-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.411-08:00| vthread-3| I120: Using temp dir "/tmp".
2015-04-16T07:14:17.412-08:00| vthread-3| I120: Obtaining info using the running kernel.
2015-04-16T07:14:17.412-08:00| vthread-3| I120: Setting header path for 3.19.3-200.fc21.x86_64 to "/lib/modules/3.19.3-200.fc21.x86_64/build/include".
2015-04-16T07:14:17.412-08:00| vthread-3| I120: Validating path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for kernel release "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.412-08:00| vthread-3| I120: Failed to find /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h
2015-04-16T07:14:17.412-08:00| vthread-3| I120: /lib/modules/3.19.3-200.fc21.x86_64/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-04-16T07:14:17.412-08:00| vthread-3| I120: using /usr/bin/gcc for preprocess check
2015-04-16T07:14:17.421-08:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.19.3-200.fc21.x86_64".
2015-04-16T07:14:17.422-08:00| vthread-3| I120: The header path "/lib/modules/3.19.3-200.fc21.x86_64/build/include" for the kernel "3.19.3-200.fc21.x86_64" is valid. Whoohoo!
2015-04-16T07:14:17.601-08:00| vthread-3| I120: Invoking modinfo on "vmnet".
2015-04-16T07:14:17.605-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2015-04-16T07:14:17.605-08:00| vthread-3| I120: Invoking modinfo on "vmci".
2015-04-16T07:14:17.609-08:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2015-04-16T07:14:17.661-08:00| vthread-3| I120: Setting destination path for vmnet to "/lib/modules/3.19.3-200.fc21.x86_64/misc/vmnet.ko".
2015-04-16T07:14:17.661-08:00| vthread-3| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-04-16T07:14:17.667-08:00| vthread-3| I120: Successfully extracted the vmnet source.
2015-04-16T07:14:17.667-08:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-g1ZENn/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.3-200.fc21.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-04-16T07:14:19.833-08:00| vthread-3| W110: Failed to build vmnet. Failed to execute the build command.
2015-04-16T07:14:19.836-08:00| vthread-3| I120: Setting destination path for vmci to "/lib/modules/3.19.3-200.fc21.x86_64/misc/vmci.ko".
2015-04-16T07:14:19.836-08:00| vthread-3| I120: Extracting the vmci source from "/usr/lib/vmware/modules/source/vmci.tar".
2015-04-16T07:14:19.844-08:00| vthread-3| I120: Successfully extracted the vmci source.
2015-04-16T07:14:19.844-08:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-g1ZENn/vmci-only auto-build HEADER_DIR=/lib/modules/3.19.3-200.fc21.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-04-16T07:14:21.915-08:00| vthread-3| W110: Failed to build vmci. Failed to execute the build command.
Thanks
trying to run iptables but i get these errors
bdoulx007:/etc# uname -a
Linux bdoulx007 2.6.26-2-686-bigmem #1 SMP Wed Aug 19 06:34:05 UTC 2009 i686 GNU/Linux
bdoulx007:/etc# modprobe ip_tables
libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/2.6.26-2-686-bigmem/modules.dep.bin'
bdoulx007:/etc# modprobe ip_conntrack
libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/2.6.26-2-686-bigmem/modules.dep.bin'
bdoulx007:/etc# modprobe iptable_filter
libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/2.6.26-2-686-bigmem/modules.dep.bin'
bdoulx007:/etc# modprobe ipt_state
libkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/2.6.26-2-686-bigmem/modules.dep.bin'
Thanks!
Hi, I am trying to install a smartcard reader driver onto my ubuntu machine. I am not able run the make file.
The output of makefile is as follows:
Code:
amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$ sudo make
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.release ./define.h
make -C /lib/modules/3.16.0-36-generic/build SUBDIRS=/home/amit/Downloads/Linux Driver/rts_pstor modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-36-generic'
arch/x86/Makefile:136: CONFIG_X86_X32 enabled but no binutils support
Makefile:652: Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: -fstack-protector not supported by compiler
make[1]: *** No rule to make target `Driver/rts_pstor'. Stop.
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-36-generic'
make: *** [default] Error 2
amit@ubuntu:~/Downloads/Linux Driver/rts_pstor$
The make file for this driver is as follows:
Code:
TARGET_MODULE := rts_pstor
EXTRA_CFLAGS := -Idrivers/scsi
obj-m += $(TARGET_MODULE).o
$(TARGET_MODULE)-objs := rtsx.o rtsx_chip.o rtsx_transport.o rtsx_scsi.o rtsx_card.o \
general.o sd.o xd.o ms.o spi.o
default:
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.release ./define.h
make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
debug:
sed "s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/" timestamp.in > timestamp.h
cp -f ./define.debug ./define.h
make -C /lib/modules/$(shell uname -r)/build SUBDIRS=$(shell pwd) modules
install:
cp $(TARGET_MODULE).ko /lib/modules/$(shell uname -r)/kernel/drivers/scsi -f
clean:
rm -f *.o *.ko
rm -f $(TARGET_MODULE).mod.c
Please let me know any of your comments.
Thanks,
Amit