Can't Set Repos In RHEL6.0, Unable To Install Packages

Hello

I try to install the epel repository so I can install ejabberd.

I do not have epel, it seems :

Code:

[root@serv src]# ls /etc/yum.repos.d/
CentOS-Base.repo  CentOS-Debuginfo.repo  CentOS-fasttrack.repo  CentOS-Media.repo  CentOS-Vault.repo  n2.repo

So I try to install epel :

Code:

[root@serv src]# rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
Retrieving http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
Preparing...                ########################################### [100]
	package epel-release-6-8.noarch is already installed

But when I try to install ejabberd :

Code:

[root@serv src]# yum install ejabberd
Loaded plugins: downloadonly, fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
 * base: ftp.nluug.nl
 * extras: ftp.nluug.nl
 * updates: ftp.nluug.nl
No package ejabberd available.
Error: Nothing to do

Something is wrong with epel.

Hello,

I need to install perl-Expect, so, I executed:

Code:

#  yum install -y perl-Expect
Error: Package: perl-Expect-1.21-14.el7.noarch (epel)
           Requires: perl(IO::Pty) >= 1.03
Error: Package: perl-Expect-1.21-14.el7.noarch (epel)
           Requires: perl(IO::Tty)

Okay, I need to install perl(IO::Pty)

I launched
Code:

# yum install -y "perl(IO::Pty)"
No package perl(IO::Pty) available.
Error: Nothing to do

So, how to install all required perl modules to the RHEL?

I follow the URL to install awstats , the installation process seems successful .

http://thelinuxfaq.com/90-how-to-ins...os-fedora-rhel

But when I try to run the report by
Code:

http://192.168.0.1/awstats/awstats.pl?config=mydomain.com ,

it pops the error.

Code:

Not Found

The requested URL /awstats/awstats.pl was not found on this server.

then I create /awstats/awstats.pl in DocumentRoot directory , now when I re-try to run the report , it display the program code of the awstats.pl but not show the report , would advise what is wrong ?

I have CentOS 7 64 bit. I have installed open-vm-tools on it.
I have installed vmplayer using
Code:

./VMware-Player-6.0.1-1379776.x86_64.bundle

Now when I try to open vmplayer on it, it does not load 'Virtual Network Device'
and shows error in terminal
Code:

Failed to build vmnet.  Failed to execute the build command.

When I check status of vmware, it shows
Code:

Module vmnet not loaded

If I try to run
Code:

vmware-modconfig --console --install-all

It gives me following error.
Code:

make: Leaving directory `/tmp/modconfig-2NfFeS/vmnet-only'
Unable to install all modules.

I am not able to open VMplayer, please help me to open it.

Thanks

--Kind Regards
Sam

RHEL changed the w default options in 7!!! (or at least Centos did) Is there a way to get them back?

In particular the -f flag is gone now as a default option, to show the IP, of the person connecting.

Which means instead of a simple 1 letter:
Code:

w

You have to do:
Code:

w -f

or Code:

finger

If there an easy way to add that option back as a default option? (Other than making an alias).

Can you guys advise on how to resolve this? We have a machine (RHEL 6 32bit 2.6.32-504.8.1.el6.i686) that boots to a black screen. I can SSH into it from my machine, but when you're physically at the machine it just displays a black screen.

I have tried booting from the previous 2 kernels, but still get the black screen.

I am assuming something got hosed with the video stuff? Its an ATI Radeon 4000series card. Should I install the ATI driver from their website and try? We have never had to do that with these machines though.


Also, when running a yum update, we receive this error. I'm not sure how to resolve this and if resolving this will fix the video issues.

Code:

# yum update
Loaded plugins: downloadonly, product-id, refresh-packagekit, rhnplugin, security, subscription-manager
This system is receiving updates from RHN Classic or RHN Satellite.
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: libudev = 147-2.46.el6 for package: libgudev1-147-2.46.el6.i686
---> Package libudev.i686 0:147-2.57.el6 will be an update
---> Package libudev-devel.i686 0:147-2.46.el6 will be updated
---> Package libudev-devel.i686 0:147-2.57.el6 will be an update
---> Package udev.i686 0:147-2.46.el6 will be updated
---> Package udev.i686 0:147-2.57.el6 will be an update
--> Finished Dependency Resolution
Error: Package: libgudev1-147-2.46.el6.i686 (@rhel-i386-workstation-6)
           Requires: libudev = 147-2.46.el6
           Removing: libudev-147-2.46.el6.i686 (@rhel-i386-workstation-6)
               libudev = 147-2.46.el6
           Updated By: libudev-147-2.57.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.57.el6
           Available: libudev-147-2.29.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.29.el6
           Available: libudev-147-2.35.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.35.el6
           Available: libudev-147-2.40.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.40.el6
           Available: libudev-147-2.41.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.41.el6
           Available: libudev-147-2.42.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.42.el6
           Available: libudev-147-2.46.el6_4.2.i686 (rhel-i386-workstation-6)
               libudev = 147-2.46.el6_4.2
           Available: libudev-147-2.51.el6.i686 (rhel-i386-workstation-6)
               libudev = 147-2.51.el6
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest

Heres after running yum update --skip-broken:

Code:

# yum update --skip-broken
Loaded plugins: downloadonly, product-id, refresh-packagekit, rhnplugin, security, subscription-manager
This system is receiving updates from RHN Classic or RHN Satellite.
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: libudev = 147-2.46.el6 for package: libgudev1-147-2.46.el6.i686
---> Package libudev.i686 0:147-2.57.el6 will be an update
---> Package libudev-devel.i686 0:147-2.46.el6 will be updated
---> Package libudev-devel.i686 0:147-2.57.el6 will be an update
---> Package udev.i686 0:147-2.46.el6 will be updated
---> Package udev.i686 0:147-2.57.el6 will be an update
--> Running transaction check
---> Package libudev.i686 0:147-2.46.el6 will be updated
---> Package libudev.i686 0:147-2.57.el6 will be an update
--> Processing Dependency: libudev = 147-2.57.el6 for package: libudev-devel-147-2.57.el6.i686
--> Running transaction check
---> Package udev.i686 0:147-2.46.el6 will be updated
--> Processing Dependency: udev = 147-2.46.el6 for package: libudev-devel-147-2.46.el6.i686
---> Package udev.i686 0:147-2.57.el6 will be an update

Packages skipped because of dependency problems:
    libudev-147-2.57.el6.i686 from rhel-i386-workstation-6
    libudev-devel-147-2.57.el6.i686 from rhel-i386-workstation-6
    udev-147-2.57.el6.i686 from rhel-i386-workstation-6

Thanks in advance.

Hello again,

i need to understand once for all the syntax of files.repo.

When i need a repository i create under /etc/yum.repos.d/ the repository file

goofy.repo

with this syntax

[repository_name]
[goofy]
baseurl=ftp:///mydirectory/myrepodir
gpgcheck=0

---
Myrepodir contains all the *.rpm files i need

when i exit and save i get anytime this error

Code:

ftp:///mydirectory/myrepodir/repodata/repomd.xml: [Errno 14] PYCURL ERROR 6 - ""
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: repobase. Please verify its path and try again

What am i wrong for? How can i just say to my rhel/centos system
"Ehy, for rpm look inside /mydirectory/myrepo" ?

Thanks

Hi

I am using Centos 6.5 and i am testing Glusterfs.

I have at /etc/hosts :

Code:

123.456.789.000 host1
000.987.654.321 host2

And they can ping each other and all working great...

Glusterfs requires this command:

Code:

mount host1:/gluster-vmstore /home/nginx/public -t glusterfs

and if i run it manually it works great.

But when i restart checking using df -h is gone and is not working until i run it again manualy

I found on a tutorial that this edit on /etc/fstab will work after restart:

Code:

host1:/gluster-vmstore /home/nginx/public glusterfs defaults 0 0

But after restarting it was not working

Any ideas?

Thanks

Hi
I am getting the below error while trying to install openshift by script openshift.sh

subscription-manager repos --enable=rhel-6-server-ose-2.1-infra-rpms
Error: rhel-6-server-ose-2.1-infra-rpms is not a valid repo ID

Don't suppose someone can tell me exactly what to write in order to download and install PMS on Arch? I'm about to throw my computer out of the window.

First I tried:

Code:

sudo pacman -S plex-media-server-plexpass

And it cannot find anyting. I've only managed to find Plex Home Theatre using this method.

Next I tried:

Code:

sudo pacman -U https://downloads.plex.tv/plex-media-server/0.9.11.17.986-269b82b/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm

Which resulted in an error stating:

Code:

error: failed retrieving file 'plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm.sig' from downloads.plex.tv : the requested URL returned error: 404
warning: failed to download https://downloads.plex.tv/plex-media-server/0.9.11.17.986-269b82b/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm.sig
loading packages...
error: '/var/cache/pacman/pkg/plexmediaserver-0.9.11.17.986-269b82b.x86_64.rpm' : package missing required signature.

I mean, what am I doing wrong? Can someone please tell me exactly what to type in to download and install PMS?

Cheers