Error

hie

am using ns2.34
i have tried to run: make clean
:make

i got this results

for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec indep-utils/webtrace-conv/epa indep-utils/webtrace-conv/nlanr indep-utils/webtrace-conv/ucb; do ( cd $i; make all; ) done
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'


running a tcl file with black hole attack i get the following error, but am not sure whats the problem excatly

num_nodes is set 33
INITIALIZE THE LIST xListHead
ns: _o171 blackhole:
(_o171 cmd line 1)
invoked from within
"_o171 cmd blackhole"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o171" line 2)
(SplitObject unknown line 2)
invoked from within
"_o171 blackhole"


give me some reference or some sites where to video tutorials, or pdf tutorials which can help me to solve this problems

i will be very grateful for response

Hello,
this is my first question on this forum,hope to get a satisfactory answer.

i have ubuntu 9.10 installed on my laptop with ns-allinone-2.31.
i want to add a new module to NS2. i edited Makefile.in under
/home/ns-allinone-2.31/ns-2.31 directory. whenever i enter command
make -f Makefile.in
i get
make: *** [tools/random.o] Error 127
error.
i have gcc version 4.4.1.

i think some bug in ns-allinone-2.31 or some thing?

thanks

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html


After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:

g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:

bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.


Do you have any ideia how to correct this?

Thank you in advance.

Trying to install software/drivers for wireless dongle on my Fedora Linux box. I have downloaded and expanded my files into my /home/me/Downloads.

In my example: /home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3
This is where the make file is.

I run make and get an error:
"make -C /lib/modules/3.4.2-1.fc16.i686/build SUBDIRS=/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux modules
make: *** /lib/modules/3.4.2-1.fc16.i686/build: No such file or directory. Stop.
make: *** [LINUX] Error 2"

The directory "/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux" does exist.

What am I missing? I have run it as myself and root and get the same error.

Any assistance greatly appreciated.

TIA,

Skip

Hi.

Running Suse 10.1 on an x86_64 machine. Trying to install a program and having some difficulty. The program is codeco 3.3. It's a format conversion program used for converting seismic waveforms such that they can be analysed by different analysis packages.

http://www.seismo.ethz.ch/products/s...3/codeco3.html

My debugging skills aren't up to much and I'm hoping someone might be able to help me out with the error. The steps involved in the installation of the package a

1. Download, gunzip and untar.

2. make config
> jp@linux:/usr/local/codeco> make config
(cd src; ./conf.csh)
found system Linux
found compiler

...this is ok, but

3. make
>jp@linux:/usr/local/codeco> make
(cd src; make)
make[1]: Entering directory `/usr/local/codeco/src'
o ../bin/codeco codecomain.f gse_io.f codecoutil.f compdecomp.f sacsub.f sac_io.f mseed_io.f css_io. today.f utmepo.f epoutm.f
make[1]: o: Command not found
make[1]: [codeco] Error 127 (ignored)
make[1]: Leaving directory `/usr/local/codeco/src'

The src code itself is written in fortran and I'm using the Intel fortran compiler version 9.0.031.

I'm at a loss as to the meaning of the above error...my knowledge of linux and software installation still not very good!

Thanks

hi guys, im trying to get rid of a non empty directory. i have researched it online and it basically says that the command would be sudo rmdir -r filename
it keeps coming back with invalid option for r

what am i doing wrong?

the directory is in the home directory along with the documents, videos, download etc and i am in the home directory. i tried putting a text file there to make sure i am in the right path and it deleted it with rm so the path is correct.

i understand that i can do it with the gui but im trying to learn the terminal for the next forty years.

any suggestions would be greatly appreciated.

Dear all,

I am trying to cross compile Apache httpd-2.4.12 for ARM, but after solving some errors I arrived to a point where I get an error in the make process that I do not know how to solve it.

I am using apr-1.5.2, apr-util-1.5.4 and PCRE-8.37 which I copied to httpd-2.4.12/srclib/ with the names apr, apr-util and pcre.

For compile htttp I use:
Code:

./configure --prefix='/usr/local/apache' CC=arm-xilinx-linux-gnueabi-gcc --host=arm-xilinx-linux-gnueabi --with-included-apr ac_cv_file__dev_zero="yes" ac_cv_func_setpgrp_void="yes"C ap_cv_void_ptr_lt_long="no" ac_cv_struct_rlimit="yes"

The output is:

make[1]: Entering directory `/home/usr/Xilinx/Software_arm/httpd-2.4.12'
arm-xilinx-linux-gnueabi-gcc -std=gnu99 -g -O2 -DLINUX -D_REENTRANT -D_GNU_SOURCE -I. -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/os/unix -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/include -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr/include -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr-util/include -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr-util/xml/expat/lib -I/home/usr/Xilinx/Software_arm/pcre/include -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/aaa -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/cache -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/core -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/database -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/filters -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/ldap -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/loggers -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/lua -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/proxy -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/session -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/ssl -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/test -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/server -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/arch/unix -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/dav/main -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/generators -I/home/usr/Xilinx/Software_arm/httpd-2.4.12/modules/mappers -c /home/usr/Xilinx/Software_arm/httpd-2.4.12/server/buildmark.c
/home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr/libtool --silent --mode=link arm-xilinx-linux-gnueabi-gcc -std=gnu99 -g -O2 -L/home/usr/CodeSourcery/Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux/arm-xilinx-linux-gnueabi/libc/lib -o httpd modules.lo buildmark.o -export-dynamic server/libmain.la modules/core/libmod_so.la modules/http/libmod_http.la server/mpm/event/libevent.la os/unix/libos.la -L/home/usr/Xilinx/Software_arm/pcre/lib -lpcre /home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr-util/libaprutil-1.la /home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr-util/xml/expat/libexpat.la /home/usr/Xilinx/Software_arm/httpd-2.4.12/srclib/apr/libapr-1.la -lrt -lcrypt -ldl
/home/usr/CodeSourcery/Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux/bin/../lib/gcc/arm-xilinx-linux-gnueabi/4.6.1/../../../../arm-xilinx-linux-gnueabi/bin/ld: server/mpm/event/.libs/libevent.a(event.o): undefined reference to symbol 'pthread_sigmask@@GLIBC_2.4'
/home/usr/CodeSourcery/Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux/bin/../lib/gcc/arm-xilinx-linux-gnueabi/4.6.1/../../../../arm-xilinx-linux-gnueabi/bin/ld: note: 'pthread_sigmask@@GLIBC_2.4' is defined in DSO /home/usr/CodeSourcery/Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux/bin/../arm-xilinx-linux-gnueabi/libc/lib/libpthread.so.0 so try adding it to the linker command line
/home/usr/CodeSourcery/Sourcery_CodeBench_Lite_for_Xilinx_GNU_Linux/bin/../arm-xilinx-linux-gnueabi/libc/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[1]: *** [httpd] Error 1
make[1]: Leaving directory `/home/usr/Xilinx/Software_arm/httpd-2.4.12'
make: *** [all-recursive] Error 1

Could anyone please help me? Any suggestion suggestions?
Thanks in advance and best regards.

Hello every one
please I need your help to fix my problem to install ns2.33allinone on the ubuntu 10.10 in order to run ZRP protocol for security purpose.
before this time I install every thing correctly as follow
The steps I follow to run the ZRP on the Ubuntu 10.10 and Ns2-allinone-2.33
------------------------------------------------------------------
1. first install the Ubuntu 10.10 on VMwear and download the ns2.33 and exract it in the home directory

2.Ubuntu 10.10 - 32´ is old. you have to replace the text in /etc/apt/sources.list , to be able to install packages.
So you write
$ gedit /etc/apt/sources.list
After the file open remove all the text and past the following text instead it.
#
deb http://old-releases.ubuntu.com/ubuntu/ maverick main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-updates multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-backports multiverse universe
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security main restricted
deb http://old-releases.ubuntu.com/ubuntu/ maverick-security multiverse universe
#

Then save the file and close.

3.Write the following command to update the system
$ sudo apt-get update

4.download the two files from the following link and save it in the home directory

gcc41-compat , `gcc41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing
g++41-compat , `g++41-compat-4.1.2_i386.deb' :
https://drive.google.com/file/d/0B7S...it?usp=sharing

5.write the following command to install
$ sudo dpkg -i g++41-compat-4.1.2_i386.deb gcc41-compat-4.1.2_i386.deb

6.write the following command to update the packages
$sudo apt-get install libx11-dev libxmu-dev libxmu-headers libxt-dev libtool make automake autoconf g++

7. Download the ZRP from the following link and put it in the ns-allinone-2.33 directory
The latest "patch package" is zrp-ns233-patching.tar.gz
https://drive.google.com/file/d/0B7S...it?usp=sharing

8. After that you should follow the next steps
$ cd ns-allinone-2.33/
$ tar xvf zrp-ns233-patching.tar.gz
$ export CC=gcc41 CXX=g++41
$ ./install
$ cd ns-2.33/
$ sudo make install

9. Then you can download the example of the ZRP from the following link and run
ZRP examples : zrp-examples-2012.tar.bz2
https://drive.google.com/file/d/0B7S...it?usp=sharing

but now when i try to install it again i got this error
after i run "./install" command
#
============================================================
* Build tcl8.4.18
============================================================
configu WARNING: unrecognized options: --enable-gcc
checking whether to use symlinks for manpages... no
checking whether to compress the manpages... no
checking whether to add a package name suffix for the manpages... no
checking for gcc... gcc41
checking whether the C compiler works... no
configu error: in `/home/ali/ns-allinone-2.33/tcl8.4.18/unix':
configu error: C compiler cannot create executables
See `config.log' for more details
tcl8.4.18 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.
#

so please if any one can help me to fix this problem or give me any advice how to run ZRP protocol and the appropriate environment to run it
thanks in advance for your help

Hi , i desinstall ns2.34 and i want to reinstall again so i was follow your step
$ tar xvf ns-allinone-2.34.tar.gz
$ cd ns-allinone-2.34/
$ patch -p0 < lwx+LTE+dccp+MPTCP.patch
$ export CC=gcc41 CXX=g++41 && ./install

and with this patch i add another patch for wimax "wimax-awg26_ns235.patch"

but when i install ns2.34 this erreur was showen
common/packet.h: In static member function ‘static void p_info::initName()’:
common/packet.h:402: error: ‘PT_WIMAXBS’ was not declared in this scope
make: *** [common/scheduler.o] Error 1
Ns make failed!

can you tell me where is the problem ???