Iphone Notrecognised By Ubuntu 14

My son built me a new desktop from the ground up, which works beautifully, but I'm new to Linux (Ubuntu) and learning as I go. Since my computer is custom, I don't have any "instructions" to lean on. I want to upload pictures from my cell phone, but don't know how because I'm not very computer literate (sorry!). I have tried plugging in my LG G3 phone with a USB cable, but my computer doesn't seem to respond to it. Nothing happens. Can someone give me some pointers? Thanks!

Thanks so much, Ztcoracat, I did manage to get all the pictures printed out that I needed by using your idea of emailing them to my email address and then printing them out from there. Great idea and good advice!! Thanks again!!

I am not sure what happened here, and I find it oddly disturbing that a Putty session from Window could do this, but here is what I did -

I was attempting to open a ssh redirect session from Putty command line on my W7 work PC to my home PC running Ubuntu 14.04. I've done this before with the Putty GUI and had no issues at all, but this time I was using cmd line and it never did connect. I ran this command:
Code:

putty -ssh -D 1080 -P 22 domain.com

The Putty window opened but never connected. I tried twice and when it didn't connect, I gave up and went back to the GUI. I connected with the GUI just fine, but after connecting an SSH session to my Ubuntu server at home, I noticed it was acting odd.

Long story short: It was in a "read-only" mode, saying the file system was read-only. I couldn't run apt-get update or even create a new folder in my Home folder or desktop. I remotely rebooted the machine and it never came back online.

When I got home I checked it, and it told me that Ubuntu had found some errors, and was asking if I wanted to correct them. I said yes and it took a short while, but then finally let me log back in.

After this, the box is about 90-95% back to normal except for a couple of odd things that I don't understand.

The main issue is that my Samba shared drives are no longer working. The fstab file looks the same and can connect to other machines, but nothing can connect back to the Ubuntu box. The folder permissions are correct also. I have a CentOS7 box, a Fedora laptop and a W7 box - none of them can connect to my Ubuntu box. I only run Samba and connect with it, even from Linux boxes, just to make it simple (since Windows is stupid and can't use NFS) - this has always worked in the past. Now for the life of me, I can't figure out why nothing will connect.

Is there a logfile or trouble-shooter I could look at it see what happened? It should be in /var/log somewhere, but I don't know where to start. SSH? Samba? The entire filesystem was read-only for a short while, so is there a FS or System log in /var/log?

I am kinda confused on this one, any help is appreciated.

Hello, I have an embedded linux device. I can connect to the device and I can upload or download files. No problem with this. But, at first connection, I want to connect to "/" directory instead of "/root". In the device file system, there are files ssh_config and sshd_config under /etc/ssh directory. I think I have to do something with these files but I don't know what.

I don't exactly know what mean "/root" and "/" directories. I think that the real root directory is "/" directory which is empty but when I connect with filezilla, the "/root" directory is the default so I had to go back to / directory everytime.

What Is Linux Kernel?

Those who don't know what is the Linux Kernel they should know it because Linux kernel is the essential part of any Linux operating system. It is responsible for resource allocation, low-level hardware interfaces, security, simple communications, basic file system management, and more. Written from scratch by Linus Torvalds (with help from various developers), Linux is a clone of the UNIX operating system. It is geared towards POSIX and Single UNIX Specification compliances.

Latest Stable Linux Kernel Version 3.18.1
It's been a quiet week, and the patch from rc7 is tiny, so 3.18 is out.
I'd love to say that we've figured out the problem that plagues 3.17 for a couple of people, but we haven't. At the same time, there's absolutely no point in having everybody else twiddling their thumbs when a couple of people are actively trying to bisect an older issue, so holding up the release just didn't make sense. Especially since
that would just have then held things up entirely over the holiday break.
So the merge window for 3.19 is open, and DaveJ will hopefully get his bisection done (or at least narrow things down sufficiently that we have that "Ahaa" moment) over the next week. But in solidarity with Dave (and to make my life easier too let's try to avoid introducing any _new_ nasty issues, ok?]

To read all the changes and bugs fixed Download the changelog below -
Changelog

Why to Upgrade to the Latest Linux kernel

Recently in December Linux Kernel version 3.18.1 has been released and announced by Linus Torvalds. If you are using Ubuntu 14.04/14.10 or Linux Mint or any other debian/Ubuntu based then you can update to the latest kernel 3.18.1 to fix bugs, increase performance and security of the system.


Install Linux Kernel 3.18.1

Because it is not available via PPA, the needed deb packages of Kernel 3.18.1 are available via kernel.ubuntu.com. Follow the instructions for your system’s architecture exactly, in order to get a successful installation.

To install or update Latest Stable Kernel 3.18.1 on Ubuntu 15.04 vivid vervet, Ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS) , Linux Mint 17.1 Rebecca, Linux Mint 17 Qiana, Pinguy OS 14.04, Elementary OS 0.3 Freya, Elementary OS 0.2 Luna, Peppermint Five, Deepin 2014, LXLE 14.04, Linux Lite 2.0, Linux Lite 2.2 and other Ubuntu derivative systems, open a new Terminal window and bash (get it?) in the following commands:


For Linux system 32 bit :

Pass the following commands in the terminal to download the kernel file.

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...70637_i386.deb

Install Linux Kernel 3.18.1


$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

For Linux system 64 bit :

$ wget http://kernel.ubuntu.com/~kernel-ppa...170637_all.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

$ wget http://kernel.ubuntu.com/~kernel-ppa...0637_amd64.deb

Install Linux Kernel 3.18.1

$ sudo dpkg -i linux-headers-3.18.1*.deb linux-image-3.18.1*.deb

Atfer install complete, update grub and reboot your computer and choose new kernel in grub :

$ sudo update-grub
$ sudo reboot

How To Uninstall Linux Kernel 3.18.1

If you come across any problem after installing/upgrading to linux kernel, can uninstall the newly installed kernel and switch back to old kernel.

$ sudo apt-get remove 'linux-headers-3.18.1*' 'linux-image-3.18.1*'

Was running Windows 8.1 Pro till it got sick and died. I managed to install Ubuntu 14.04 on my sick computer over Windows wiping it out.

I first installed Linux Mint and downloaded Ubuntu. Somehow I was able to verify checksums or MD5Sums. I think my age is catching up with me and my mind doesn't work like it used to.

How do I find the MD5sum of a downloaded iso file. I've downloaded debian-7.8.0-amd64-DVD-1-3.iso's and both update DVD's as well. I've located the MD5Sum files on the Mirror. Now, how do I compare those numbers/letters with the iso's I've downloaded.

I know I need to run a program to compute the MD5 but can't find it in the menu. I see I need to read man pages and info pages, but can't find them either.

A brain is a terrible thing to waste, but mine needs help.

Thanks,
Stephen

Hello Everyone
I have installed Ubuntu Server on a 500 GB drive formatted as EXT4.

Of of my Media, movies, music and pictures are from Windows PC's formatted in NTFS.
As all of the computers connecting to the server will be windows based will NTFS be fine or will I have to reformat them to work. The two media drives are 2 x 2GB Sata drives.
Could you tell me if this setup would work or will I have to reformat and and transfer the files to a new filesystem.
Also as a file server whats the best linux file system to use so it will work with windows PC's in a lan flawlessly.
Thanks for you expertise.
Regards

Hello everybody,

I am seeking help regarding sharing internet connection. I would be greatful.

I have;
A Laptop : Samsung RV509, i3, 300GB HDD, 3GB Ram, Dual boot Windows7 & LM 17 cinnamon 32bit. WiFi & Bluetooth available. A Desktop PC : Celeron CPU 2.4GHZ, 40 GB HDD, 1GB RAM, LiveUSB-LM 17 cinnamon 32bit, No WiFi hardware available, No Bluetooth hardware available. A mobile phone : Nokia Asha 500, WiFi & Bluetooth available. An old USB data cable: with which the mobile phone can be connected to the computers. I have successfully connected and transfered data back & forth, and also shared/connected Mobile-Broadband-internet to both Laptop and Desktop.

What I have been doing now is; I have an internet connection to my Laptop with an external modem and Ethernet. Its working fine. I have an unlimited plan and so I want to share this internet connection on the mobile phone too; instead of incuring extra cost by connecting to the internet directly through the phone. I am successful at that. I can share this internet connection on my phone through WiFi.

Now, what I want to do is; without buying any extra hardware, to share this same internet connection on my Desktop PC, too.

What I tried is; I searched the web, but didn't find any solution. Now I am here. Please kindly help me.

Thank you & Regards

Anil

I have downloaded ubuntu.
I wish to uses open office.
I was told to remove a symlink.
Where do I Start.
The instructions from wikihow is suitably vague for a beginner!

I have several computers connected to a D-Link DIR605L router, two with ethernet cables and two through wifi. The Windows XP computer can see itself and nobody else. The Ubuntu (trusty) desktop and Ubuntu (lucid) netbook computers see nobody (unable to retrieve file list from server) and the Windows Vista computer only sees itself. Clearly, I have failed to configure something or a set of somethings.
Do I have to have one of the computers always on, acting as some kind of file server or can the router do this job? This is a new router. My old one (whose power supply went phut) connected everybody without arguing about it and we could share files around, even with a mix of OSs.
Since this is a local network only, I have no firewalls enabled, as far as I know ...
All of the network set-up posts I've found rabbit on about how to get your internet connection working through your router, which is not an option for me. I have dial-up working on the XP computer and a mobile wireless USB dongle for internet access on the trusty desktop.
I've installed samba and a few other packages, but so far, none of them have solved my problem. Can someone please tell me where to start and which tutorials to read? If I have to set up a computer as a file server, I guess it will have to be the XP thing, as it's the only one that is always running, but I'd like to avoid that, if possible, as I speak XP worse than I speak Ubuntu.
BTW, D-Link are no help at all, two hours on the 'phone and they were still trying to get me to connect to an ADSL service I don't have ...

I set up a Ubuntu on a Virtualbox VM instance, using bridged network. External SSH to it is very slow. I am not sure if it's a Ubuntu problem or a Virtualbox problem. I labeled some delay gaps in a debug ssh session:

ssh -v mybox.mydomain.xxx -l myid

OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to mybox.mydomain.xxx [129.186.142.168] port 22.
debug1: Connection established.
debug1: identity file /home/hu/.ssh/identity type -1
debug1: identity file /home/hu/.ssh/id_rsa type 1
debug1: identity file /home/hu/.ssh/id_dsa type -1
debug1: loaded 3 keys
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6p1 Ubuntu-2ubuntu1
debug1: match: OpenSSH_6.6p1 Ubuntu-2ubuntu1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.3
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'mybox.mydomain.xxx' is known and matches the RSA host key.
debug1: Found key in /home/eded/.ssh/known_hosts:23
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
(-----pause 12 seconds------)
debug1: Authentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: Trying private key: /home/hu/.ssh/identity
debug1: Offering public key: /home/hu/.ssh/id_rsa
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug1: read PEM private key done: type RSA
(-----pause 5 seconds------)
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env LANG = en_US
(-----pause 31 seconds------)
Welcome to Ubuntu 14.04 LTS (GNU/Linux 3.13.0-24-generic i686)

Any suggestions? Thanks in advance.

joe