Hey all,
I've got an HP Pavilion dm4 Notebook that's been like a good friend to me in the past, but hasn't been running as well as it used to. I decided to move on to something new that I knew would work - some form of Linux. I chose Lubuntu, as I had heard so many good things about it and wouldn't need to run loads of processes.
I ran through the installer from a flash drive and installed Lubuntu 14.04 onto my machine, and was then prompted to reboot. Now I'm stuck on the Gnu Grub page, where *Ubuntu is listed instead of *Lubuntu. Whenever I hit Ubuntu to start, screen cuts to black, I see the HP logo and BIOS login note, and am dropped back in front of the Grub page. This is my first true experience with the Linux kernel (I've played with Raspbian).
Does anyone have any insight as to what's going wrong? I haven't yet been able to login and am unsure regarding where to go.
Thanks
-K
hello all at linuxquestions
first off would just like to say how useful this resource is, Ive been setting up a VM server in lubuntu recently and this site has given me alot of help and helped me get it off the ground. Im certainly a linux noob and only been messing around in linux for a week, so please forgive me for any derpy terminology
anyway, I installed lubuntu onto a VM as an intention to use it as a server
to be honest it was an ISO I had lying around and due to it being "light" I just went for it
however I have since discovered ubuntu do a flavour known as "ubuntu server"
first off..
what is the difference between ubuntu server and regular ubuntu/lubuntu etc?
is it just that it does not load a full fat gui?
if there is a big diffrence would it be easy to "turn" lubuntu into ubuntu server? since they are sort of based off each other?
secondly, lubuntu loads up lxde upon boot, I was wondering if there was a way for it to just boot up without the gui with the option to turn it on via shell (startx etc)
this is because I have little ram to play with but I also like to use the GUI sometimes when needing to do certain admin stuff, for example I use steam via Wine to download steam games sometimes
I was pondering the idea of installing ubuntu server and then downloading the lxde desktop and going that route, but Im not sure if it would bring any benefit opposed to just modifiying my current lubuntu installation
any advise or tips would be welcome
thanks!
In August of this year I'm going to build a dedicated linux audio computer. I have been using ubuntu studio on my cheapo dell optiplex to learn linux and to get used to different programs and see which ones I need.
Lubuntu seems to use less cpu than ubuntu studio for the same program. I don't want any other programs on my system part from ardour, jack and a few misc MP3 players. All audio. It says that ubuntu studio is a low latency program, does this mean that Lubuntu isn't low latency? It seems that Lubuntu is running the program easier but I'm nervous to go with it because I fear it may be missing certain components to keep it less needy of cpu power.
What are your thoughts on this.
Hi folks,
after googling for a couple of days, I get the feeling, this is a common problem. But the usual fix doesn't seem to work for me.
I am trying to install Linux on a separate partition of my Acer Aspire V5-573G. I used the Lili USB Creator to make a bootable USB drive with Ubuntu 12.04 on it.
when I reach the installation menu, it doesn't matter what I choose (start live, install..), my notebook will always freeze on a black screen.
I figured out how to add 'nomodeset' to the grub line. This does bring me one step further (the Ubuntu start screen) but then I get this message:
Code:
ubuntu@ubuntu:^^$ [ 20.267422] mei 0000:00:16.0: init hw failure.
[ 20.267558] mei 0000:00:16.0: initialization failed.
After pressing enter I get a command line. From here I don't know what to do.
I've tried other distros (Lubuntu, Linux Mint), but then even 'nomodeset' didn't make a difference. I have also tried to add 'acpi=off' to the grub line after 'nomodeset', but again only black, even with Ubuntu.
Any suggestion or help will be greatly appreciated!
Good Day my Linux Friends! I was wondering if anybody can help me with an interesting project i am working on?
I have an interesting issue in which I have a Lubuntu 14.04, that I am working to set up as a hotspot hub. That means when the banana pi/ rasberry pi is spitting out wifi signal, I can connect to it, a chrome window or ie window will pop up and i can sign in and start manipulating the device?
So essentially a piratebox with a linux system that you can login into.
I am curious if that is possible?? I have scoured the net and haven't found the right thing, anybody know any good projects they can point me too?
I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You
Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.
installed digiKam 4:3.5.0-Oubuntu 10 and dependent packages from Synaptic Package Manager.
Graphics/digiKam selected - no action
Operating system Ubuntu 14.04.2 LTS. (LUBUNTU)
I have used digiKam successfully in previous versions of Ubuntu.
(In your LQ tutorial you refer to using 'how-tos' -where are these?-and search for occurence of 'digikam' - have attempted this without success)
(Your tutorial suggests I introduce myself - I have used Ubuntu for many years but only in GUI. My Unix knowledge is near zero - whenever I attempt to understand descriptions in the forums I get stumped by acronyms and terms that are common to other Linux users)
I hope you can help.
when i turn my PC on that says ubuntu,recovery and bios i think i click on ubuntu then get a black screen with a blinking cursa tonight i typed in start x and it loaded PC worked how it should but why doesn't it go straight to the page were i put my password in, i should get ubuntu with dots underneath, then the screen to put my password in but i don't and if i shut my PC down it takes longer then i cant get internet and i have to keep returning to the page and click ubuntu eventually it boots up my friend suggested i type start x on the black screen which i did tonight i am aware its probley something i did when i first loaded ubuntu os i had the PC built for me with no os onit because i wanted a fresh linux/ubuntu systen
Hi guys,
I'm new to this forum and linux too.
I thought of installing a lightweight distro of linux and did some research on the net where I found people recommending Puppy Linux. Plus it is (theoretically speaking) possible to run it from a USB (flash) drive which I decided to try out but it seems like it's not that simple a task as a lot of people (all over the internet) say it is.
What I tried so far is this: installing it into a thumb drive using unetbootin follwing a youtube tutorial (which basically showed how to download an iso of puppy, use unetbootin to make the thumbdrive bootable and install puppy on it). It didn't work. The USB wasn't recognized as a bootable device. I know for sure it can be booted from it since I tried ubuntu from the same USB and the same Laptop (which is able to boot from USB).
I thought that something with the Flash Drive not OK so I tried to use a windows installer to install puppy like other windows programms but this didn't work either. This time Puppy was recognized because there was an option to boot either Puppy or Windows 7 but when I chose to boot from Puppy nothing happens just a screen flash, some letters in the top left corner saying something like NTSC or NTSF (I can't read it properly because it goes away too fast) then after the screen flash the whole thing again (boot from win 7 or Puppy I choose Puppy again the flash... basically a loop).
Any ideas what I'm doing wron or what the problem is?
Thank You for any replies.
I have visited many forums and know hat this is a very frequently asked questions. I have just installed Lubuntu 14.04 on an old Toshiba NB505. I have tried the
rfkill list all command.
It shows that I have a Hard Block. I have connected with an Ethernet cable and have updated.
The drivers were removed and were attempted to be re-installed in Windows but did not seem to work either.
any added suggestions. I read another post that suggested that I reload Windows as a partition and try adding the drivers again.
p.s. I should add that I am true Newbie and last took a Computer class in 1988...yes
that is correct 1988
Hi all! I'm a Linux/Ubuntu noob who has recently bought a brand new HP laptop, nuked the Win 8 OS that it came/w & installed Ubuntu 14.04LTS. After DL/installing apps & setting it up a bit I decided to use gparted & partition my HDD for an additional OS, isolate programs from files, adjust swap, etc. All went well until I was prompted to reboot which I did & now I'm stuck @
" BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) multi-call binary.
usage: chroot NEWROOT [PROG ARGS]
Run PROG with root directory set to NEWROOT "
Which invariably produces: (no matter what command I enter?!?)
" (initramfs) boot from BIOS
/bin/sh: boot: not found "
I'm quite confused @ how to proceed here?
My primary concern is the health of my machine through/after this is worked out.
That said, I'd love to not have to re-install Ubuntu/apps, etc. as I was partitioning the HDD because I had gotten it to a nice back-up place & felt ready to set it up.
Like I said I'm new to Linux/Ubuntu & waayyy behind on my terminal coding, but I could really use some pointers here & I'm not usually hard to teach. lol
Help?! :-[
Thanx!
Embarrassingly yours, WS.