Script To Find The File Creation Time Is More Than Ten Minutes

Hi All,

I have two scripts, the aim of these two scripts is, to check whether a particular script is running or not, if it wont runs, then throw a mail.

How i Achieved this output is, I wrote first script.

I created an infinite while loop which performs below steps

1. It creates a touch file
2. Triggers the script which needs to be monitored if its working or not.
3. Removes the touch file.

If the second step fails, then the remove file command will not happen and the script will stuck there itself.

I created an another script which checks the creation time of the touch file and if it is more than ten minutes, it means the second step in the first script is hanged, which also means that particular script is not working.

So if the creation time is more than 2 minutes the second script will throw a mail.

Below are the two scripts.

Code:

#!/bin/ksh



userid="chansd"

filename="/apps/log/check.txt"

while true ;do
touch $filename
pass=`/apps/eDMZ/call_st.ksh $userid`
sleep 20
rm $filename
done

Below script checks the file creation time and throws email if it is older than 2 minutes
Code:

#!/bin/ksh


filename="/apps/log/check.txt"

if [ -f "${filename}" ]
then
if test "`find $filename -mmin +2`"
then
echo "script is not working ! Please act on it" | mail -s "Script  is not working" Example@mail.com
fi


else

        exit 1

fi

What im going to do is

1. I am going to run the first script in background so it runs forever.
2. I am going to run the second script in cron forevry 5 mins to check the file creation time.

3. So if the first script hangs . I will kill the process using process id and after the issue resolves with the inner script, I will run the main script again.

I am new to Linux, Please let me know if this approach will work as expected.

Hi,

I am new to UNIX - i wrote this below script based on the requirement. But i am stuck at the concatenation (at the second last step of the code)

The below code is working fine till the concatenation(second last step) - I need to concatenate Hello to the "physId" e.g. - The filename is UM123456789.20150503 - i am extracting M123456789 and i need to append "HELO" to it at the end. But as per the below script - when i am using the concatenation, it is overwriting the M123456789 and the output thus becomes HELO456789. I am trying to get the output as - M123456789HELO - where am i going wrong?

on the terminal i checked - echo $0 and it gave -> /bin/sh. Hence i wrote the below code.

#!bin/sh
absolutePath=/abc/data/abc_unix/stg/decrypt/*.*
filepath=$(echo ${absolutePath%.*})
echo "$filepath"
filenameext=$(echo ${filepath#/abc*decrypt/})
echo "$filenameext"
file=$(echo ${filenameext#.*})
echo "$file"
extract_physId=$(echo ${file:1:9})
physId=$(echo ${extract_physId})
echo "$physId"
key="$physId"HELO
echo "$key"

Hello,
I'm working on a shell script that needs to read the a file (file1) a batch (read 2000 lines at a time) and then write those lines to seperate file which I'm using to run ldapmodify command. I need to check some other file size and once this file less than 200kb, i would need to run second batch and so on until file1 is empty.
Quote:
#!/bin/bash
set -x
filesize=200
server=10.11.xxx.xx
filename=fileimport.txt
taofile1=687686.txt
taofile=/var/opt/$taofile1

stty -echo
echo -n "Enter password: "
read passwd
stty echo
context="cn=user1,ou=org1,ou=org2,o=org"
if [[ -s "$filename" ]];then
for lines in $filename
do
head -99997 fileimport.txt >> ldapreadd.ldif && sed -i '1,+99996d' fileimport.txt
if [ -s ldapreadd.ldif ];then
ldapmodify -h $server -p 389 -D $context -w $passwd -v -x -f ldapreadd.ldif &> /dev/null
echo "LDIF script is running. Please wait..."
sleep 60
if [ -f "$taofile" ];then
taofilesize=`stat -c %s ${taofile}`
# if [ "$taofilesize" -ge 200 ];then
while [ `stat -c %s ${taofile}` -ge 200 ]
do
echo " Driver is processing LDIF file. Please wait..."
sleep 60
done
fi
rm -rf ldapreadd.ldif
fi
done
else
echo "$filename file is empty. Exiting script..."
exit
fi

I have 2 issues here. first one script is not reading exact lines as specified. Some times its reading more lines some times less lines. Second issues once it run the first batch, script is exiting. Please advise.

Hi!
I wrote a script shell about changing IP of the httpd.conf from text file and saving a new httpd.conf file for all IPs in the text file. The code is below, Im using mremote on windows (RHEL Release 5.7), and getting this error:
./script1.sh: line 19: syntax error: unexpected end of file

Please help me about that error. Thanks!

(ps: line 19 is the last line in the code => done < "$filename" )

#!/bin/bash

DATE='date +%Y%m%d_%H:%M:%S'
NAME=httpd_ip_change
EXTENSION=conf
max=10

filename="$1"
while read -r line

for ((i=2; i<=$max; ++i ))

do
touch $NAME$i.$EXTENSION.$DATE

sed "s/<VirtualHost 10.11.92.81:80>/$line/g" ./httpd.conf > $NAME$i.$EXTENSION.$DATE

done < "$filename"

This is my script and the syntax to run this script is give ip and next will be the file or script you want to perform on remote server



#!/bin/bash

# The private key used to identify this machine
IDENTITY_KEY=/home/adnew.pem

syntax()
{
echo "Syntax: Ec2.sh server_ip scriptFile]"
echo "For example: ./Ec2.sh server_ip scriptFile"
exit 1
}

if [ $# -ne 2 ]
then
echo not enough arguments
syntax
fi


echo "Running script $2 on $1"
ssh -ttq -i $IDENTITY_KEY ec2-user@$1 sudo -i 'bash -s' < $2
exit
exit
echo "Done"



on script file i have give for testing

touch /root/test
ls /root/test
exit
exit

it makes the file but do not show the ls output by giving error


tcgetattr: Inappropriate ioctl for device

exit


what I have to do ??

I have a shell script that currently changes the mac address of eth0 repeatedly. However, it does not change the public IP address, confirmed by wget -qO- ipinfo.io/ip .

PERIOD=10

while [ 1 ]
do
echo "Changing mac address..."
let lastup=`date +%s`
macchanger -A eth0
let diff=`date +%s`-$lastup
if [ "$diff" -lt "$PERIOD" ]
then
sleep $(($PERIOD-$diff))
echo "Changed mac address successfully."
echo
elif [ "$diff" -gt "$PERIOD" ]
then
echo "Command took longer than iteration period of $PERIOD seconds!"
fi
done

The script needs to change the IP Address statically.

Also, ultimately, what I am trying to accomplish, for security reasons, is to frequently and automatically change a computer's public IP address and mac address. This way, my office's computers, when using the Internet, has an additional form of protection.

Hi Everyone,

I need some help on my bash script, I'm trying to rename a certain line in a file which might be 1 or more.

IDXCOUNT=`grep -c 'index .* on ' $FILENAME`;

for n in $(eval echo {1..$IDXCOUNT});
do
timestamp=$(date +"%s");
echo "Renaming index idx_$timestamp..";
if [ $n -eq 1 ]; then
sed -i "0,/^index [^)]* on /s/index idx_$timestamp on /" $FILENAME;

My problem is, if the sed target is 2 or more it will generate an idx_$timestamp that will cause duplicate index value when the script finish. My goal is to have the script recognize that when there are multiple index in the file, it will try to rename it one by one.

I'm new to bash so I'm not sure if I explained my issue well but I will appreciate any help!!

Thanks!

I have many hosts as following. But those hosts are dual operating system (Linux and Windows). I always run program background. If someone is using Linux, it is fine. But if someone is using windows or the host is offline. Then, I cannot use ssh. The way I do preiviously is first ssh one by one. And then find the hosts which are offline or windows. And write them down one by one. And then ssh to hosts except them. Let us assume the number of programs is less than the total available hosts. Can someone write a shell script to output the all available hosts to a file like "host_available"?
Here is the host file.
https://www.dropbox.com/s/vbz6w864y3...tlist.txt?dl=0
I am using ssh to connect the computers on campus. If the computer I am trying to connect is offline or using windows, the ssh will take long time, and finally it will failed. I write a shell script to generate the hostlist
Code:

#!/bin/bash
for i in `seq -w 1 28`
do
echo "c15-0330-$i.ad.mtu.edu"
# I would like to add a command here to see whether ssh c15-0330-$i.ad.mtu.edu it succeeds or not. And then output a #file which contains the all available host.
done
for i in `seq -w 1 20`
do
echo "c28-0112-$i.ad.mtu.edu"
done
for i in `seq -w 1 20`
do
echo "c28-112a-$i.ad.mtu.edu"
done

I do not how to set a certain time to see whether connection is successful or not (see the comment in the shell script).

Hi all,

I'm trying to identify files that do not have matches for certain strings. FYI, these are files of DNA sequences and I'm trying to find those that are NOT sampled for any species by my group of interest (e.g., genes that are specific to that group of organisms).

I tried this code but it's actually yielding a list of files that DO match for my regexp.
Code:

for FILENAME in *.fas
do
grep -q -L ">PBAH" $FILENAME && grep -q -L ">SKOW" $FILENAME && grep -q -L ">CGRA" $FILENAME && echo $FILENAME
done

Basically I want to somehow go through and file files that do not contain ">PBAH" ">SKOW" or ">CGRA". Any assistance would be greatly appreciated!

Best,
Kevin

i need to complete this exercise but my code has some issues
HERE is the PRoblem:
Create a script that can accept ANY amount of numbers from the command line. Process the numbers one at a time, where numbers greater than 10 print “large”, numbers less than or equal to 10 print “small”
E.g. process 5 10 15 would print
small
small
large

and here is my code so far
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi
if [ $@ -le "10" ]
then
echo "smaller"
else
echo "bigger"
shift
fi

any help would be greatly appreciated