Back In Time And Teamviewer Through Command Line

hello all..
I am using Centos 6. Is there any way to run or start "back in time" and "team viewer" from the command line??
plzz help me.. its an urgent..
thanks in advance


Similar Content



Back In Time Install From The Command Line

hello everyone.,
i am using linux Centos 6 machine, i have downloaded "back in time" through command line.
but i dont know how to install "back in time" from the command line.
i found some commands but that for UBUNTU and not running on Centos 6, giving error.
so , without GUI. can be possible to install and use it?????

thanks in advance..

How Do I Use The At ---- To Run Ktorrent

I am running fedora 20 I type: "at 1400" ENTER then the next line appears :> so I type "ktorrent" ENTER then the next line I press ctr D. My problem is when the time actually comes for this program to start at the specified time it does not. How to do i get ktorrent to propperly start at a specified time with the at command

Equivalent Command For "time -v" In Centos

I want to know the approximate maximum memory usage by my process. If I start the process using "time -v <myprocess>", I get the output after it terminates. This works fine in RedHat Enterprise Linux, but not in Centos. There does not seem to be an option "-v" for time. Do I miss anything ? What is the equivalent in Centos to know the peak memory usage by a process ?

How Can I Recompile PHP With ./configure?

Hello,

I am trying to install OCI8. I'm pretty sure the last thing I need to do is run the "./configure" command, but no matter where I try to run it, it gives me back a "file not found" or "command not found" error. I have tried this on CentOS and Fedora and always install PHP with yum. I have done many GUI searches looking through the file system for "php" and have tried to run ./configure in every php folder I can find but the command never runs. Any suggestions are very much appreciated. Thanks so much!

-Matt

P.S. Do I even need to do this if I already edited the "php.ini" file and installed OCI8 with PECL? Thanks!

URGENT HELP!!! GPSR Patch With Ns-2.34 Ubuntu 12.04

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.


(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

Search For A Character In Specific Word In File And Replace It In The Word

Hi all ,
I have a requirement where I have a file. Contents of the file are :
#comments
VAR="abg"
RES=123
#comments
IC6790ABG="https://www.abc.com"
IC5678-vg="https://www.bhy.com"
IC-gy_567:78="https://www.gyt.com"
#comments
The variable names can not have characters like - , : so
in this file I have to find words starting with IC and replace characters like - ,:
I want to change only the variable name , not the whole line.
I have used SED command

sed -i '/^IC/s/[^0-9 a-z A-Z _]*//g' file

when I am using this command , it is replacing the whole line
output becomes :

#comments
VAR="abg"
RES=123
#comments
IC6790ABGhttpswwwabccom
IC5678vghttpswwwbhycom
ICgy56778httpswwwgytcom
#comments


But I want the output like this :

#comments
VAR="abg"
RES=123
#comments
IC6790ABG="https://www.abc.com"
IC5678vg="https://www.bhy.com"
ICgy_56778="https://www.gyt.com"
#comments

How can I get the desired output , thanks for your help in advance .

Using The Teminal Command Line In Ubuntu 12.04 Lts

Stupid question i know. I am trying to install some brother printer drivers and following the instructions it states that i must change to the directory where the file is stored by using the following command line "cd /home/(loginname)/downloads"

this comes back with unkown directory. When i use DIR the directory is there but it will not allow me to access it?

This has worked before. I have been using linux now for a few years and never had this problem before. It must be something stupid that I am doing.

Problem In Installing The Software Using The Command Line

Hi all,
i am new to linux, i am using Centos 6. There is some problem in the network settings as i am able to browse internet from a browser but when i am trying to use the terminal (using ping command) for any of the website (say www.google.com) nothing is happening. suppose i want to install some software (like hdf5), when i am using "sudo yum install hdf5" it shows large number of error massages like "error could not connect to the host". It would be a great help if someone provide the solution.
Thanks in advance.

Durgesh

Deleting Extra Text Within A Line... (tearing Out Remaining Hair..!)

Hi all,
Im trying to tidy up a web scrape txt file so it just shows the URL's..
As below, I've got most with just the url but struggling to work out how to delete extra txt within a line, without deleting the whole line.
i.e a command that says.. delete from this word.. till end of line .. or delete everything between word1 and word2

//newzealandtrails.com/sites/all/themes/nztrails/css/print.css?nmkrag");
//newzealandtrails.com/sites/all/themes/nztrails/css/tabs.css?nmkrag");
//newzealandtrails.com/sites/default/files/ctools
//newzealandtrails.com/sites/default/files/New20Zealand%20Trails.png" //newzealandtrails.com/sites/default/files/nztrails-logo_0_0.png" alt="New Zealand Trails" /></a></div>
//newzealandtrails.com/welcome-new-zealand-trails" st_title="" class="st_sharethis_button" displayText="sharethis"></span>
//player.vimeo.com/video/71298207" webkitallowfullscreen="" width="500px"></iframe></div>
//w.sharethis.com/button/buttons.js"></script>

Thanks in advance

Disk Is Not Getting Detected After Run The Scsi Command

Hi

RHEL 6.4 (64 Bit) is running as a Virutal Machine in a VCenter Server 5.5
As per our request, Vmware team added 500GB of disk space to this VM. Disk is not visible in "fdisk -l" after run the following command/script, but the new disk could be seen from the "multipath -l" command.

for i in `ls -ld /sys/class/scsi_host/host* | awk '{print $9}' `
do
echo "- - -" > $i/scan
done

Could someone clarify why it is not visible in "fdisk -l" output?