Ubuntu 4 Tb Partitioning Confusion - Need Advice

Everything is working great on this server, however I am seeing Disk doesn't contain a valid partition table. I have no issue reading and writing, this something that can be ignored?


Disk /dev/xvda: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders, total 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/xvda1 * 16065 62910539 31447237+ 83 Linux

Disk /dev/xvdf: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdf doesn't contain a valid partition table

Disk /dev/xvdh: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdh doesn't contain a valid partition table

Disk /dev/xvdg: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdg doesn't contain a valid partition table

Disk /dev/xvdi: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders, total 2147483648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdi doesn't contain a valid partition table

Disk /dev/mapper/vgebs-lvebs: 4398.0 GB, 4398029733888 bytes
255 heads, 63 sectors/track, 534696 cylinders, total 8589901824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 2097152 bytes / 4194304 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vgebs-lvebs doesn't contain a valid partition table

Disk /dev/xvdj: 32.2 GB, 32212254720 bytes
255 heads, 63 sectors/track, 3916 cylinders, total 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/xvdj doesn't contain a valid partition table

UPDATED:
I installed a Deb 7 Srv w LVM w following partitions:
The end product should become a mail server (Citadel) and in time also a Web server.
Code:

 df -hT 
Filesystem                Type      Size  Used Avail Use% Mounted on
rootfs                    rootfs    322M  141M  165M  46% /
udev                      devtmpfs   10M     0   10M   0% /dev
tmpfs                     tmpfs     100M  260K  100M   1% /run
/dev/mapper/deb--srv-root ext4      322M  141M  165M  46% /
tmpfs                     tmpfs     5,0M     0  5,0M   0% /run/lock
tmpfs                     tmpfs     200M     0  200M   0% /run/shm
/dev/sda1                 ext2      228M   18M  199M   9% /boot
/dev/mapper/deb--srv-home ext4      233G  188M  221G   1% /home
/dev/mapper/deb--srv-tmp  ext4      368M   11M  339M   3% /tmp
/dev/mapper/deb--srv-usr  ext4      8,3G  481M  7,4G   6% /usr
/dev/mapper/deb--srv-var  ext4      2,8G  236M  2,4G   9% /var

 fdisk -l 
Disk /dev/sda: 268.4 GB, 268435456000 bytes
255 heads, 63 sectors/track, 32635 cylinders, total 524288000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00064033

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048      499711      248832   83  Linux
/dev/sda2          501758   524285951   261892097    5  Extended
/dev/sda5          501760   524285951   261892096   8e  Linux LVM

Disk /dev/mapper/deb--srv-root: 348 MB, 348127232 bytes
255 heads, 63 sectors/track, 42 cylinders, total 679936 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-root doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-swap_1: 2143 MB, 2143289344 bytes
255 heads, 63 sectors/track, 260 cylinders, total 4186112 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-swap_1 doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-usr: 8996 MB, 8996782080 bytes
255 heads, 63 sectors/track, 1093 cylinders, total 17571840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-usr doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-var: 2998 MB, 2998927360 bytes
255 heads, 63 sectors/track, 364 cylinders, total 5857280 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-var doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-tmp: 398 MB, 398458880 bytes
255 heads, 63 sectors/track, 48 cylinders, total 778240 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-tmp doesn't contain a valid partition table

Disk /dev/mapper/deb--srv-home: 253.3 GB, 253289824256 bytes
255 heads, 63 sectors/track, 30794 cylinders, total 494706688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/deb--srv-home doesn't contain a valid partition table

 pvs 
PV         VG      Fmt  Attr PSize   PFree
/dev/sda5  deb-srv lvm2 a--  249,76g    0

 lvs 
LV     VG      Attr     LSize   Pool Origin Data%  Move Log Copy%  Convert
home   deb-srv -wi-ao-- 235,89g
root   deb-srv -wi-ao-- 332,00m
swap_1 deb-srv -wi-ao--   2,00g
tmp    deb-srv -wi-ao-- 380,00m
usr    deb-srv -wi-ao--   8,38g
var    deb-srv -wi-ao--   2,79g

Now i want to _shrink_ the HOME partition so I can expand my VAR partition. Looked for guides but haven't found any site useful so far

I tried to find a way to do it when I installed it but it didn't seem to offer me this at this time even I looked around for a while.

How do I do this shrinking of HOME and extending of VAR partition??
please be fairly specific as Im not a pro yet

I have windows 7 and the factory recover on 2 of the partitions That I wish to keep

Hello All;
I am building a Linux media server in my home and I am new to Linux.

Right now I am at the point where I am partitioning and formatting each of my 4TB drives.

I ran sudo parted on /etc/sdb
Then I set mklabel to gpt.

Now my question is about mkpart.

In order to use the full 4TB disk for data (Only one partition)

Do I set mkpart primary 0GB 3725GB
or
do I set mkpart primary 0GB 4000GB?

I don't want to enter a larger capacity than my disk will allow but I also want to be sure I am taking advantage of all of the available space.

Thanks.

Tim

As I'm sure there are other posts for this, I'm terrified to mess with disks in Linux as I'm very green. I've looked at one other post which suggests to run the following so I'm going to do the same. The drive provisioned originally had 400 gb, but currently has 500 gb allocated in vmware. Thanks so much in advance!

Code:

fdisk -l
pvs
vgs
lvs
df -h

Code:

[root@uspk10splunk ~]# fdisk -l

Disk /dev/sda: 8589 MB, 8589934592 bytes
64 heads, 32 sectors/track, 8192 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c255c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           2         501      512000   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             502        8192     7875584   8e  Linux LVM
Partition 2 does not end on cylinder boundary.

Disk /dev/sdb: 536.9 GB, 536870912000 bytes
255 heads, 63 sectors/track, 65270 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x69437664

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       52216   419424988+  8e  Linux LVM

Disk /dev/mapper/vg_uspk10vsp03-lv_root: 3833 MB, 3833593856 bytes
255 heads, 63 sectors/track, 466 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_uspk10vsp03-lv_swap: 4227 MB, 4227858432 bytes
255 heads, 63 sectors/track, 514 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_opt-lv_opt: 429.5 GB, 429488340992 bytes
255 heads, 63 sectors/track, 52215 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Code:

[root@uspk10splunk ~]# pvs
  PV         VG             Fmt  Attr PSize   PFree
  /dev/sda2  vg_uspk10vsp03 lvm2 a--    7.51g    0
  /dev/sdb1  vg_opt         lvm2 a--  399.99g    0

Code:

[root@uspk10splunk ~]# vgs
  VG             #PV #LV #SN Attr   VSize   VFree
  vg_opt           1   1   0 wz--n- 399.99g    0
  vg_uspk10vsp03   1   2   0 wz--n-   7.51g    0

Code:

[root@uspk10splunk ~]# lvs
  LV      VG             Attr      LSize   Pool Origin Data%  Move Log Cpy%Sync                     Convert
  lv_opt  vg_opt         -wi-ao--- 399.99g                                                          
  lv_root vg_uspk10vsp03 -wi-ao---   3.57g                                                          
  lv_swap vg_uspk10vsp03 -wi-ao---   3.94g

Code:

[root@uspk10splunk ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/vg_uspk10vsp03-lv_root
                      3.6G  1.5G  1.9G  45% /
tmpfs                 1.9G     0  1.9G   0% /dev/shm
/dev/mapper/vg_opt-lv_opt
                      394G  374G  422M 100% /opt
/dev/sda1             485M   32M  428M   7% /boot

I got this configuration.

fdisk -l

Disk /dev/sda: 493.9 GB, 493921239040 bytes
255 heads, 63 sectors/track, 60049 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac38

Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 32636 261630976 8e Linux LVM

Disk /dev/mapper/vg_gazduire-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_gazduire-lv_swap: 5100 MB, 5100273664 bytes
255 heads, 63 sectors/track, 620 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/mapper/vg_gazduire-lv_home: 209.1 GB, 209119608832 bytes
255 heads, 63 sectors/track, 25424 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


df -h

Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_gazduire-lv_root
50G 21G 27G 44% /
tmpfs 2.4G 0 2.4G 0% /dev/shm
/dev/sda1 485M 161M 299M 35% /boot
/dev/mapper/vg_gazduire-lv_home
192G 17G 166G 9% /home
/usr/tmpDSK 2.0G 981M 955M 51% /tmp


I want to increase the /dev/sda1 with aproximativ 200 gb who remains ! My plans a i want to make /dev/sda3 and i want to put in
vg_gazduire!

VG Name vg_gazduire
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 249.51 GiB
PE Size 4.00 MiB
Total PE 63874
Alloc PE / Size 63874 / 249.51 GiB
Free PE / Size 0 / 0



When i type fdisk /dev/sda3 the system give me Unable to open /dev/sda3!

Could anyone tell me the solution?

I was wondering if I can repair my current partitioning setup using gparted, or if I should just reload Xubuntu. Basically I screwed up by making the primary partition only 256M, and made a massive extended logical partition for everything else, and did not leave swap space. I am doing this on an older PC with MBR, dual processor, 2G RAM each processor, 160GB hard drive space. It is single boot, no Windows. I would like the partioning to be as follows, leaving empty disk space for other Linux flavors:

/ 13GB ext4
/home 50GB ext4
swap 8GB swap

sudo parted /dev/sda print all
Code:

Model: ATA ST3160812AS (scsi)
Disk /dev/sda: 160GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type      File system  Flags
 1      1049kB  256MB  255MB  primary   ext2         boot
 2      257MB   160GB  160GB  extended
 5      257MB   160GB  160GB  logical
                                                                       
Error: /dev/mapper/xubuntu--vg-swap_1: unrecognised disk label

Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/xubuntu--vg-root: 158GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End    Size   File system  Flags
 1      0.00B  158GB  158GB  ext4
                                                                          
Error: /dev/mapper/sda5_crypt: unrecognised disk label

df -hT
Code:

Filesystem                   Type      Size  Used Avail Use Mounted on
/dev/mapper/xubuntu--vg-root ext4      145G  6.5G  131G   5% /
none                         tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
udev                         devtmpfs  989M  4.0K  989M   1% /dev
tmpfs                        tmpfs     201M  1.1M  200M   1% /run
none                         tmpfs     5.0M     0  5.0M   0% /run/lock
none                         tmpfs    1003M   88K 1003M   1% /run/shm
none                         tmpfs     100M   24K  100M   1% /run/user
/dev/sda1                    ext2      236M  120M  104M  54% /boot
/home/mbrk/.Private          ecryptfs  145G  6.5G  131G   5% /home/mbrk

Booted my computer with 2 USB flash drives inserted. One of the drives turned out to be an MS-DOS boot drive. The PC booted in DOS and wiped out the partition table of the other flash drive with my data on it. This second (64Gb) drive had a single 64Gb type 83 (Linux) primary partition (ext4 file system).

Is there a way to recover the data that's on the second stick?

I've been told that all I have to do is repartition it exactly as it was and my data will be there. But I'd like to have advice from the pros here before I start messing with it.

For the time being, I dd-ed the entire stick, as is, onto a blank partition of my hard disk (dd if=/dev/sdb of=/dev/sda14). The process completed without errors but /dev/sda14 is unmountable for the moment.

Thanks for any help.

OK Im pretty new to Linux and learning so much, but with RHEL6,

When your taking a test and they say to make a partition this size/name it this, how do you know which disk to partition if you do a listing?

I get so confused with the fdisk stuff and I would really love it if someone is kind enough to help me out.

Hi everybody,

I am trying to set up my sd card with an embedded ubuntu I build lately according to this linkhttps://eewiki.net/display/linuxonar...-Ubuntu14.04.1 (Topic Setup microSD/SD card).
I am doing this on Ubuntu running in VirtualBox. I am quite new to linux and barely understand the command that causes the first warning. Here is what happened:

ubuntu@ubuntu-VirtualBox:~$ sudo sfdisk --in-order --Linux --unit M ${DISK} <<-__EOF__ --force
> 1,12,0xE,*
> ,,,-
> __EOF__
Checking that no-one is using this disk right now ...
BLKRRPART: Invalid argument
OK

Disk /dev/sdc1: 1019 cylinders, 246 heads, 62 sectors/track

sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/sdc1: unrecognized partition table type
Old situation:
No partitions found
New situation:
Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End MiB #blocks Id System
/dev/sdc1p1 * 1 12 12 12288 e W95 FAT16 (LBA)
/dev/sdc1p2 13 7591 7579 7760896 83 Linux
/dev/sdc1p3 0 - 0 0 0 Empty
/dev/sdc1p4 0 - 0 0 0 Empty
Successfully wrote the new partition table

Re-reading the partition table ...
BLKRRPART: Invalid argument

If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
ubuntu@ubuntu-VirtualBox:~$ sudo mkfs.vfat -F 16 ${DISK}p1 -n BOOT
mkfs.fat 3.0.26 (2014-03-07)
/dev/sdc1p1: No such file or directory


So after I entered "sudo sfdisk --in-order --Linux --unit M ${DISK} <<-__EOF__ --force
> 1,12,0xE,*
> ,,,-
> __EOF__ "
everything looked fine since it sad that it created the partition sdc1p1 etc. but as soon as I want to format this partition with "sudo mkfs.vfat -F 16 ${DISK}p1 -n BOOT" it tells me that there is no partition called /dev/sdc1p1

I would be very gratefull if somebody could help me out on this. I thought about trying a different tutorial but they look really really different so I tried to stick to the one that worked well for me so far.

Thank you very much!

Regards,

Lenni