"make Install" In A Custom Directory ?

Hi, I've just recently installed MySQL connector/c from source code on my Slackware 14.1 x64

I read the official instructions of the connector but I felt a bit disorientated when I read:
Code:

1 -Change location to the top-level directory of the source distribution.

I interpreted that I have to go to the "highest" directory Code:

/

So I wrote: Code:

 
        #                            cd /

root@- /#                            tar xzvf /home/normal/Downloads/mysql-connector-c-6.1.6-src.tar.gz 

root@- /#                            cd /mysql-connector-c-6.1.6-src/

root@- /mysql-connector-c-6.1.6-src# cmake -G "Unix Makefiles"

root@- /mysql-connector-c-6.1.6-src# make 

root@- /mysql-connector-c-6.1.6-src# make install

Then I did:
Code:

ln -s /usr/local/mysql-5.6.25/include /usr/include

But when I try to compile a program in c with #include <mysql.h> i get this error:
Code:

# gcc ctemp.c 
In file included from ctemp.c:2:0:
/usr/include/mysql.h:57:27: fatal error: mysql_version.h: No such file or directory
 #include "mysql_version.h"
                           ^

What can I do? Thanks a lot and sorry for poor english

PD: If you need the official instructions I paste here the link: https://dev.mysql.com/doc/connector-...on-source.html

Hello,

I try to use a ftp daemon and a Telnet daemon with inetd and the BusyBox v1.19.0 on a linux 2.6.24.

When running inetd and then checking what is listening with "netstat -an |grep LISTEN" i have :
Code:

netstat: /proc/net/tcp6: No such file or directory
netstat: /proc/net/udp6: No such file or directory
netstat: /proc/net/raw6: No such file or directory
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN

tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN

tcp        0      0 0.0.0.0:23              0.0.0.0:*               LISTEN

ftp port 21 and Telnet port 23 seems to be listening.

My inetd.conf file is :

Code:

#<service_name>    <sock_type>    <proto>    <flags> <user>     <server_path>     <args> 

21 stream tcp nowait root ftpd ftpd /etc
telnet            stream        tcp        nowait    root    /usr/sbin/telnetd

I have no rule in my hosts.deny so nothing should be stopped and i have no iptables firewall in place too.

When typing "ftp://ipofthetarget" in a web browser i have a error :

Code:

504 Gateway Timeout
Gateway timeout expired while waiting for server response.

And when trying to Telnet from another computer or "Telnet localhost" from the board i have :
Code:

# telnet 10.2.29.201
Trying 10.2.29.201...
connected to 10.2.29.201.
Escape character is '^]'

Connection closed by foreign host.

This would mean that the connection for Telnet exist but why is it closing ?

Thank you for your future answers !

UPDATE 1 :
If i try to run telnetd like this :
/usb/sbin/telnet -l /bin/sh
i can connect anonymously from another computer, not perfect because i would like a user/password but still of use.
The problem with the ftp daemon still exist.

UPDATE 2 :
Trying from Windows cmd or linux terminal : ftp ipofthetarget seems to work
Not perfect because i would like a user/password too but still of use.

I am still open for suggestion for the user/password thing. I am not deleting the thread in case someone interested about this exist.

I have simple c code and I want to make .bin file to run on friendly arm board. In redhat I install cross compile gcc and Use "gcc -o hello hello.c" this command to make object file. when I run this file in friendly arm it give "line 1: syntax error: unexpected "(" "

Thanks
--
Abdul Wahab

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth

Hi everyone (i hope this is the right section)

Im trying to install the RT patch preempt_rt 3.18.9 im running Ubuntu 14.04 with kernel v 3.16

i installed the rt patch "patch-3.18.9-rt5.patch" and also a new kernel "3.18.9" i patched the patch file with

patch -p1 < patch-3.18.9.patch

but there is somthing i don't know about linking folders of old kernel and new kernel, i searched about it and found

rm -rf linux && ln -s /usr/src/linux-3.18.9 linux && cd /usr/src/linux

then

make oldconfig

then

make menuconfig

i selected Full preemptive kernel then

make

then this error

cc1: some warnings being treated as errors make[2]: * [kernel/locking/locktorture.o] Error 1 make[1]: * [kernel/locking] Error 2 make: *** [kernel] Error 2


So..... Any help?? can someone walk me through this

or any other real time patch, Thanx.. plzzzzzz

Hello,

I am working on a board (sbc6000x with at91sam9261 micro, linux 2.6.24 to be precise) and having some fun making script i wanted to make real application.
The board is coming with a cross compilation toolchain. When trying to make a simple "hello world" executable to print on the terminal there is no problem.
I open my terminal, give the path of the compiler, cd into the folder where my .c file is and then i type :
Code:

arm-linux-gcc -o hello hello.c

Which create my executable "hello" and this one is working. But like i said, this program only played with the terminal.

The board is starting with a script calling another executable which use the lcd display, i have the source of this executable. My idea was to look at what was in the source of this application (lots of folders and files) in order to understand how it was working. I wanted to test the toolchain on the source (with the makefile) to see if i was able to generate an executable from a application with folderS/fileS but when i try to "make" it i have this error.

In my understanding this is an object file but aside from that i don't see why it would not works.

Thank you for your future answers !

Hi

I am new to kali linux and have got a fresh install with all the current updates (without any new repositories). I am really interested in aircrack and wifi exploitation. But before i can do any of that i need to install my second network adapter, the asus n53 pcie. I am able to type this because my motherboard came with its own intergrated wifi adapter, the aetheros (something). That was working out of the box as soon as kali linux was installed, however i need a proper network adapter (the n53) to make use of my 3rd party long range antenna (it can pick up networks over 600m away ).

I am attempting to install my asus n53 pcie network adapter but have had no success at all, most likely because i have no idea what to do once i have extracted the driver. Currently it is sitting in my home folder. It has a few folders and files in it, with these being the folders

(chips, common, include, os, rate_ctrl, sta and tools)

and these being the files

(iwpriv_usage.txt, makefile, readme_sta_pci, rt2860STA.dat, rt2860staCarddat, sta_ate_iwpriv_usage.txt.)

In the readme file it says this in the instructions:

1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.

2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.

3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c

5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat

6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up

#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up

7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta

And this to me looks like another language. I would GREATLY APPRECIATE IT if someone could give me step by step instructions on how to install this, without skipping on anything. I will even pay 10000 dogecoin if someone helps me! I have been searching youtube tutorials for 3 hours (lol) for it and havent found anything. Please help me!

Thanks

Hi,

I installed ghostscript via yum package manager. Later I wanted a newer version of ghostscript and compiled it from source. "make install" placed the gs executable file under /usr/local/bin/gs. This works if I run the command with absolute path, but if try to run gs, the shell will output

"-bash: /usr/bin/gs: No such file or directory"

if I echo the path variable it will display

/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin

If i run whereis it will give me the correct path
gs: /usr/local/bin/gs

How do I make it work so that typing "gs" will run the executable file from the /usr/local/bin/gs?

(I am using Centos 6)

Thanks.

Trying to install software/drivers for wireless dongle on my Fedora Linux box. I have downloaded and expanded my files into my /home/me/Downloads.

In my example: /home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3
This is where the make file is.

I run make and get an error:
"make -C /lib/modules/3.4.2-1.fc16.i686/build SUBDIRS=/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux modules
make: *** /lib/modules/3.4.2-1.fc16.i686/build: No such file or directory. Stop.
make: *** [LINUX] Error 2"

The directory "/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux" does exist.

What am I missing? I have run it as myself and root and get the same error.

Any assistance greatly appreciated.

TIA,

Skip

Hello,

I am facing an issue with a filesystem (/dev/sda3); I see space used on it (around 365GB) when I am looking at the host with "df -h" command.

Code:

[root@srv_omega /]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda3             443G  365G   56G  87% /
tmpfs                  95G   56K   95G   1% /dev/shm
/dev/sda1             484M   39M  421M   9% /boot
/dev/sdb1             3.6T  1.3T  2.2T  36% /hadoop/disk1
/dev/sdc1             3.6T  1.3T  2.2T  37% /hadoop/disk2
/dev/sdd1             3.6T  1.3T  2.2T  36% /hadoop/disk3
/dev/sde1             3.6T  1.3T  2.2T  37% /hadoop/disk4
/dev/sdf1             3.6T  1.3T  2.2T  36% /hadoop/disk5
/dev/sdg1             3.6T  1.3T  2.2T  36% /hadoop/disk6
/dev/sdh1             3.6T  1.3T  2.2T  36% /hadoop/disk7
/dev/sdi1             3.6T  1.3T  2.2T  36% /hadoop/disk8
/dev/sdj1             3.6T  1.3T  2.2T  36% /hadoop/disk9
/dev/sdk1             3.6T  1.3T  2.2T  36% /hadoop/disk10
/dev/sdl1             3.6T  1.2T  2.3T  36% /hadoop/disk11
/dev/sdm1             3.6T  1.3T  2.2T  36% /hadoop/disk12
/dev/sdn1             3.6T  1.3T  2.2T  36% /hadoop/disk13
/dev/sdo1             3.6T  1.3T  2.2T  37% /hadoop/disk14
/dev/sdp1             3.6T  1.1T  2.4T  30% /hadoop/disk15
cm_processes           95G  8.2M   95G   1% /var/run/cloudera-scm-agent/process

I have looked if any hidden file might cause the issue, no joy.

Code:

[root@srv_omega /]# pwd
/
[root@srv_omega /]#  ls -lrtha
total 121K
drwxr-xr-x    2 root root 4.0K Jun 28  2011 srv
drwxr-xr-x    2 root root 4.0K Jun 28  2011 mnt
drwxr-xr-x    2 root root 4.0K Jun 28  2011 media
drwxr-xr-x    2 root root 4.0K Dec 20  2012 cgroup
drwx------    2 root root  16K Jun  2  2014 lost+found
drwxr-xr-x    2 root root 4.0K Jun  2  2014 selinux
-rw-r--r--    1 root root    0 Jun  3  2014 .autorelabel
drwxr-xr-x   18 root root 4.0K Jun  5  2014 hadoop
drwxr-xr-x   21 root root 4.0K Jun  5  2014 var
dr-xr-xr-x    9 root root  12K Jun 20  2014 lib64
dr-xr-xr-x    2 root root  12K Jun 21  2014 sbin
dr-xr-xr-x    2 root root 4.0K Jun 21  2014 bin
dr-xr-xr-x    5 root root 1.0K Jun 22  2014 boot
dr-xr-x---    5 root root 4.0K Jun 22  2014 root
drwxr-xr-x    6 root root 4.0K Jun 22  2014 opt
drwxr-xr-x    3 root root 4.0K Dec 10 19:11 home
dr-xr-xr-x   13 root root 4.0K Dec 12 16:18 lib
dr-xr-xr-x 1140 root root    0 Apr 30 15:11 proc
drwxr-xr-x   13 root root    0 Apr 30 15:11 sys
-rw-r--r--    1 root root    0 Apr 30 15:11 .autofsck
drwxr-xr-x    2 root root    0 Apr 30 15:11 misc
drwxr-xr-x    2 root root    0 Apr 30 15:11 net
drwxr-xr-x   15 root root 4.0K Apr 30 15:12 usr
drwxr-xr-x   19 root root 4.6K Apr 30 15:12 dev
dr-xr-xr-x   27 root root 4.0K Apr 30 15:12 ..
dr-xr-xr-x   27 root root 4.0K Apr 30 15:12 .
drwxr-xr-x  122 root root  12K May  4 03:33 etc
drwxrwxrwt   16 root root 4.0K May  7 06:14 tmp

So I try to find where the space is used with a "du -sh" command

Code:

[root@srv_omega /]# pwd
/
[root@srv_omega /]# du -sh *
7.8M    bin
29M     boot
4.0K    cgroup
280K    dev
26M     etc
19T     hadoop
124K    home
144M    lib
26M     lib64
16K     lost+found
4.0K    media
0       misc
4.0K    mnt
0       net
7.9G    opt
du: cannot access `proc/9170/task/27326/fdinfo/538': No such file or directory
du: cannot access `proc/45119/task/45119/fd/4': No such file or directory
du: cannot access `proc/45119/task/45119/fdinfo/4': No such file or directory
du: cannot access `proc/45119/fd/4': No such file or directory
du: cannot access `proc/45119/fdinfo/4': No such file or directory
du: cannot access `proc/45160': No such file or directory
0       proc
3.8M    root
17M     sbin
4.0K    selinux
4.0K    srv
0       sys
3.9M    tmp
2.6G    usr
16G     var

So as far as I understand, only /hadoop is a suitable suspect (as cumulative size of all the other folders on "/" are well below the 365GB)

Code:

[root@srv_omega hadoop]# cd /
[root@srv_omega /]# cd /hadoop
[root@srv_omega hadoop]# ls -lrtha
total 72K
drwxr-xr-x  2 root root 4.0K Jun  5  2014 disk16
drwxr-xr-x 18 root root 4.0K Jun  5  2014 .
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk1
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk11
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk10
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk13
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk12
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk14
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk2
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk4
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk3
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk6
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk5
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk8
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk7
drwxr-xr-x  4 root root 4.0K Jun 22  2014 disk9
drwxr-xr-x  5 root root 4.0K Nov 19 20:02 disk15
dr-xr-xr-x 27 root root 4.0K Apr 30 15:12 ..

All folders from 1 to 15 are on different filesystems, so the folder disk16 seems to be the only option but there is nothing in it.

Code:

[root@srv_omega hadoop]# cd disk16/
[root@srv_omega disk16]# ls -lrtha
total 8.0K
drwxr-xr-x 18 root root 4.0K Jun  5  2014 ..
drwxr-xr-x  2 root root 4.0K Jun  5  2014 .
[root@srv_omega disk16]#

I just don't get it; no folder seems responsible for the "365Gb"...

Any idea on how I could try to find out where those "365GB" are ?