Ns2 Project

hie

am using ns2.34
i have tried to run: make clean
:make

i got this results

for i in indep-utils/cmu-scen-gen/setdest indep-utils/webtrace-conv/dec indep-utils/webtrace-conv/epa indep-utils/webtrace-conv/nlanr indep-utils/webtrace-conv/ucb; do ( cd $i; make all; ) done
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/mike/project/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'

running a tcl file with black hole attack i get the following error, but am not sure whats the problem excatly

num_nodes is set 33
INITIALIZE THE LIST xListHead
ns: _o171 blackhole:
(_o171 cmd line 1)
invoked from within
"_o171 cmd blackhole"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o171" line 2)
(SplitObject unknown line 2)
invoked from within
"_o171 blackhole"

give me some reference or some sites where to video tutorials, or pdf tutorials which can help me to solve this problems

i will be very grateful for response

Error

Hi.. I was trying to patch a LEACH code on ns-2.34. During installation, I run the command 'make' and I've got some of the errors.

make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/cmu-scen-gen/setdest'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/dec'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/epa'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/nlanr'
make[1]: Entering directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/ns-allinone-2.34/ns-2.34/indep-utils/webtrace-conv/ucb'

Please help me to solve..

os arch - i686
os - ubuntu 10.04

Regarding Cross Compilation Of Ntp

hi all,
I am new to cross compilation .I am trying to cross compile ntp for arm based zync soc board. so i have downloaded ntp source code version ntp-4.2.8-p2

i gave options for confiure file like this ./configure --host=arm-xilinix-linux-gnueabi --build=x86_64-pc-linux-gnu --prefix=/home/sntp CC=arm-xilinx-linux-gnueabi-gcc -with-yeilding-select=yes
configuration is succesful but when i am going for make it is throwing an error like this

cd ./html && \
../scripts/build/checkHtmlFileDates
cd . && \
./scripts/build/checkChangeLog
make all-recursive
make[1]: Entering directory `/home/SNTP/ntp-4.2.8p2'
Making all in sntp
make[2]: Entering directory `/home/SNTP/ntp-4.2.8p2/sntp'
[ ! -r ./../COPYRIGHT ] \
|| [ check-COPYRIGHT-submake -nt ./../COPYRIGHT ] \
|| make check-COPYRIGHT-submake
cd ../libntp && make libntp.a
make[3]: Entering directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
CC systime.o
In file included from ../include/ntp.h:14:0,
from systime.c:9:
../include/ntp_crypto.h:27:25: fatal error: openssl/evp.h: No such file or directory
#include "openssl/evp.h"
^
compilation terminated.
make[3]: *** [systime.o] Error 1
make[3]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/libntp'
make[2]: *** [../libntp/libntp.a] Error 2
make[2]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2/sntp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/sumanth/SNTP/ntp-4.2.8p2'
make: *** [all] Error 2

suggest me how to fix this?

Regards
sumanth

Ns-allinone-2.31 Make: *** [tools/random.o] Error 127

Hello,
this is my first question on this forum,hope to get a satisfactory answer.

i have ubuntu 9.10 installed on my laptop with ns-allinone-2.31.
i want to add a new module to NS2. i edited Makefile.in under
/home/ns-allinone-2.31/ns-2.31 directory. whenever i enter command
make -f Makefile.in
i get
make: *** [tools/random.o] Error 127
error.
i have gcc version 4.4.1.

i think some bug in ns-allinone-2.31 or some thing?

thanks

Ns2 Black Hole Attack Code Runing Problem

I installed ns2 using (sudo apt-get install ns2)
I hav code for black hole attack in aodv manet and while trying to run it on ns2 Im getting the fallowing error message
please tell me how to fix this..??

INITIALIZE THE LIST xListHead

(_o58 cmd line 1)
invoked from within
"_o58 cmd addr"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o58" line 2)
(SplitObject unknown line 2)
invoked from within
"_o58 addr"
("eval" body line 1)
invoked from within
"eval $node addr $args"
("default" arm line 2)
invoked from within
"switch -exact $routingAgent_ {
DSDV {
set ragent [$self create-dsdv-agent $node]
}
DSR {
$self at 0.0 "$node start-dsr"
}
AODV {
set ragent [$self cre..."
(procedure "_o3" line 14)
(Simulator create-wireless-node line 14)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set node_(2) [$ns node]"
(file "atk3.tcl" line 55)

URGENT HELP!!! GPSR Patch With Ns-2.34 Ubuntu 12.04

Hey guys
I have been trying to patch GPSR with ns-2.34.The operating system i am using is ubuntu 12.04.
I have made all the necessary changes required in the various files .

I have another version of ns (ns-2.35 ) too but it is in a different directory.
Everytime I run my tcl file an error keeps coming up.
I will be greatful if somebody can help me.This is very very URGENT.

(_o29 cmd line 1)
invoked from within
"_o29 cmd if-queue _o23"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o29" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent if-queue [$self set ifq_(0)] "
(procedure "_o17" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o17" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "create-gpsr-routing-agent" line 29)
invoked from within
"create-gpsr-routing-agent $node $id"
(procedure "gpsr-create-mobile-node" line 41)
invoked from within
"gpsr-create-mobile-node $i"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $opt(nn) } {incr i} {
gpsr-create-mobile-node $i
}"

Problem In Running Codes Of TORA

Hi,
I am new in linux. I have following problem while running the codes of TORA in ns-2.35 in ubuntu.Can you please help me?

num_nodes is set 6
INITIALIZE THE LIST xListHead

(_o22 cmd line 1)
invoked from within
"_o22 cmd port-dmux _o37"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o22" line 2)
(SplitObject unknown line 2)
invoked from within
"$agent port-dmux $dmux_"
(procedure "_o19" line 11)
(Node/MobileNode add-target-rtagent line 11)
invoked from within
"$self add-target-rtagent $agent $port"
(procedure "_o19" line 28)
(Node/MobileNode add-target line 28)
invoked from within
"$self add-target $agent $port"
(procedure "_o19" line 15)
(Node attach line 15)
invoked from within
"$node attach $ragent [Node set rtagent_port_]"
(procedure "_o3" line 85)
(Simulator create-wireless-node line 85)
invoked from within
"_o3 create-wireless-node"
("eval" body line 1)
invoked from within
"eval $self create-wireless-node $args"
(procedure "_o3" line 23)
(Simulator node line 23)
invoked from within
"$ns node"
invoked from within
"set n(0) [$ns node]"
(file "tora2.tcl" line 115)

Problem With EDCA Patch Of 802.11e For Ns2.35

Hello, I started to use ns2.35 recently with Cygwin Terminal 1.7.35 under a virtual machine Windows XP Pro Service Pack 3. I'm having a problem when trying to apply a EDCA patch of 802.11e.

First i tried the oficial patch (intended for ns2.28), then i found a later version of EDCA:
Ref. post #18 he http://www.linuxquestions.org/questi...245/page2.html

I also tried to apply the patch for ns-2.35
Ref. post #70 he http://www.linuxquestions.org/questi...928/page5.html

After I made the changes in the files and running the following commands (as said by the 'README.txt' inside the patch)
./configure; make clean; make depend; make

I got the message:
Code:

g++ -c -O2 -Wall -Wno-write-strings  -DTCP_DELAY_BIND_ALL -DNO_TK -DTCLCL_CLASSINSTVAR  -DNDEBUG -DUSE_SHM -DHAVE_LIBTCLCL -DHAVE_TCLCL_H -DHAVE_LIBOTCL1_14 -DHAVE_OTCL_H -DHAVE_LIBTK8_5 -DHAVE_TK_H -DHAVE_LIBTCL8_5 -DHAVE_TCLINT_H -DHAVE_TCL_H  -DHAVE_CONFIG_H -DNS_DIFFUSION -DSMAC_NO_SYNC -DCPP_NAMESPACE=std -DUSE_SINGLE_ADDRESS_SPACE -Drng_test  -I. -I. -I/home/Administrator/ns-allinone-2.35/tclcl-1.20 -I/home/Administrator/ns-allinone-2.35/otcl -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/home/Administrator/ns-allinone-2.35/include -I/usr/include/pcap -I./tcp -I./sctp -I./common -I./link -I./queue -I./adc -I./apps -I./mac -I./mobile -I./trace -I./routing -I./tools -I./classifier -I./mcast -I./diffusion3/lib/main -I./diffusion3/lib -I./diffusion3/lib/nr -I./diffusion3/ns -I./diffusion3/filter_core -I./asim/ -I./qs -I./diffserv -I./satellite -I./wpan -I./mac/802_11e -o mac/802_11e/mac-802_11e.o mac/802_11e/mac-802_11e.cc
mac/802_11e/mac-802_11e.cc:41:20: fatal error: stream.h: No such file or directory
 #include "stream.h"
                    ^
compilation terminated.
Makefile:93: recipe for target 'mac/802_11e/mac-802_11e.o' failed
make: *** [mac/802_11e/mac-802_11e.o] Error 1

Also, the ns command (which was working before the patch) now shows me an error:
Code:

bash: ns: command not found

I've searched the ns directory and the ns executable there is no more.

Do you have any ideia how to correct this?

Thank you in advance.

Using Gdb To Detect Segmentation Fault In Sh?

I am using scientific linux. In the directory user/project/Build, after I ran 'make' to compile and link all the cpp files,I had no problems. But then, when I went to directory user/run/run.sh, which runs the project binary in user/project/Build/bin/project, I get a segmentation fault error. In the directory user/run, I enter 'gdb' in the command prompt and get the message "*** No targets specified and no makefile found. Stop."

What am I supposed to do to detect the segmentation fault?

Getting An Error When Running Make.

Trying to install software/drivers for wireless dongle on my Fedora Linux box. I have downloaded and expanded my files into my /home/me/Downloads.

In my example: /home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3
This is where the make file is.

I run make and get an error:
"make -C /lib/modules/3.4.2-1.fc16.i686/build SUBDIRS=/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux modules
make: *** /lib/modules/3.4.2-1.fc16.i686/build: No such file or directory. Stop.
make: *** [LINUX] Error 2"

The directory "/home/cjh/Downloads/LinuxDriver4Fedora_v2.5.0.3/os/linux" does exist.

What am I missing? I have run it as myself and root and get the same error.

Any assistance greatly appreciated.

TIA,

Skip

How To Patch GPSR Routing Protocol To Ns-2.35

Hi,
I have patched GPSR to ns-2.35 using keliu' code. It works fine with given tcl file. I need to move nodes according to mine own mobility scenario and compare them to AODV protocol.
I have two problems
1. I don't understand what this command in gpsr.tcl file means Code:

proc gpsr-create-mobile-node { id args } {
         .........................	
if [info exists opt(energy)] {
	$node addenergymodel [new $opt(energy) $node 10 0.5 0.2]}
         .............

What are these figures (0.5, 0.2), are these energy consumed in reception and transmission or some thing else.

Secondly I want move mobile node created using proc defined in gpsr.tcl file according to my own mobility plan e.g. Code:

 $ns_ at 0.000000000000 "$node_(0) setdest 144.816950690450 20.073824649527 0.324133202939"
$ns_ at 0.000000000000 "$node_(1) setdest 93.957720171475 192.140808646867 1.452613500562"
$ns_ at 12.158688172971 "$node_(23) setdest 113.137798368154 39.443538618334 0.902003496971"
$ns_ at 14.805074599534 "$node_(2) setdest 152.227654369397 20.766089279052 1.742469780423"

But when I run simulation it gives error like this:[QUOTE]Load complete...
Starting Simulation...
ns: _o18 setdest 144.816950690450 20.073824649527 0.324133202939:
(_o18 cmd line 1)
invoked from within
"_o18 cmd setdest 144.816950690450 20.073824649527 0.324133202939"
invoked from within
"catch "$self cmd $args" ret"
invoked from within
"if [catch "$self cmd $args" ret] {
set cls [$self info class]
global errorInfo
set savedInfo $errorInfo
error "error when calling class $cls: $args" $..."
(procedure "_o18" line 2)
(SplitObject unknown line 2)
invoked from within
"_o18 setdest 144.816950690450 20.073824649527 0.324133202939"
[\QUOTE]
Urgent help is needed please

Ns2 Project

Similar Content