Bedeutung "seLinux" ?

Hi, I can see the below mentioned logs writing every second into /var/log/messages.

"setroubleshoot: SELinux is preventing /usr/bin/perl from ioctl access on the file /usr/share/perl5/Exporter.pm. For complete SELinux messages. run sealert -l e6a1fd7e-a8c0-44bc-91db-b550f85f31c2"

Can anyone help me to find the root cause of this and how to fix it also?

Thanks in advance,

George

Would it be practical to have either SELinux or AppArmor for a home computer? The only two things I'm worried about are the proprietary AMD drivers and Steam. I literaly know NOTHING about SELinux or AppArmor so I'm relying on the more experienced users here.

All I need is to make sure they (Steam and the AMD Drivers) are contained within themselves and that my system will be a little more secure if an attack is posed against them.

Regards,
Amarildo

I use following shell script to send email. But the subject of email always shows "This" instead of "This is L_1.R is finished". You may refer http://www.linuxquestions.org/questions/linux-newbie-8/how-to-define-variable-in-%60ssh%60-4175540566/
Code:

host_list=("c15-0330-01.ad.mtu.edu" "c15-0330-02.ad.mtu.edu" "c15-0330-03.ad.mtu.edu" "c15-0330-04.ad.mtu.edu")
program=("L_1" "L_2" "L_3" "L_4")
subject="The job is finished"
ssh -f c15-0330-01.ad.mtu.edu 'echo' "the job ${program[0]} is finished" '|' 'mutt "zwang10@mtu.edu" -s' "This is "${program[0]}".R is finished";

Hi!

Here is mine configuration and I want make it show unicode(russian) in console, it works perfect in X11 but not when I logging into tty.

vconsole.conf
Code:

LOCALE="en_US.UTF-8"
KEYMAP="sv-latin1"
FONT_UNIMAP="lat1"
FONT_MAP="ISO8859-1"
CONSOLEFONT="ruscii_8x8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Stockholm"
USECOLOR="yes"

I just installed Redhat 7 and try to config the network , add the IP address to network card , but I got the problem.

I modify the file /etc/sysconfig/network-scripts/ifcfg-enp0s3 , the configuration is as below , and then reboot .

DEVICE="enp0s3"
NETBOOT="yes"
HWADDR="08:00:27:15:38:B7"
TYPE="Ethernet"
BOOTPROTO="none"
NAME="enp0s3"
UUID="462f4834-4fe7-43a7-84e7-83b2722e94c1"
ONBOOT="yes"
IPADDR="192.168.1.1"
NETMASK="255.255.255.0"

After reboot , I use "ip addr show" still not shown the ip address , the ip address is still blank , would advise what is wrong ? thanks

What I did in windows was create images of my drive and restore them.

in linux I am running

Code:

rsync -aAXv --exclude={"/home/*","/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} /* /path/to/backup/folder

and this creates a folder for me with all my files, and apparently saves meta data like permissions and paths...

Since I'm using arch and things break sometimes,I'm booted into a CLI with errors and cannot figure my way out since I'm a noob... would I be able to just delete my entire root and replace it with the rsync backup without a problem?

i need a bash script to switch to zero second on ac the waiting time for turning off the monitor (highlighten in red). same as for on battery (highlighten in purple)

Code:

<?xml version="1.0" encoding="UTF-8"?>

<channel name="xfce4-power-manager" version="1.0">
  <property name="xfce4-power-manager" type="empty">
    <property name="power-button-action" type="empty"/>
    <property name="show-tray-icon" type="empty"/>
    <property name="logind-handle-lid-switch" type="bool" value="true"/> 
    <property name="dpms-on-ac-sleep" type="uint" value="1"/>
    <property name="dpms-on-ac-off" type="uint" value="2"/> 
    <property name="brightness-on-battery" type="uint" value="9"/> 
    <property name="dpms-on-battery-sleep" type="uint" value="1"/>
    <property name="dpms-on-battery-off" type="uint" value="2"/> 
    <property name="lock-screen-suspend-hibernate" type="bool" value="false"/>
    <property name="dpms-enabled" type="bool" value="true"/>
  </property>
</channel>

Hello,

They gave me this:
Code:

#!/bin/bash

# Write error message on stderr and die
function die() {
  echo "$@" >&2
  exit 1
}

# Load var from properties files
function load() {
  for propertie in "$@" ; do
    [[ -f "${propertie}" ]] || die "load() : \"${propertie}\" don't exist !"
    while read ; do
echo "${REPLY%=*}"
echo "${REPLY#*=}"
      [[ -n "${REPLY%%=*}" && -z "${REPLY#*=}" ]] || die "load() : Variable \"${REPLY%%=*}\" is empty!"
      eval "${REPLY%%=*}"=\'"${REPLY#*=}"\'
    done < "${propertie}"
  done
}

load "manage_srcds.conf"
echo "SRCDS_TICKRATE=$SRCDS_TICKRATE"
echo "SRCDS_SCREEN=$SRCDS_SCREEN"
echo "SRCDS_SRCDS_GAME_NAME=$SRCDS_GAME_NAME"
echo "SRCDS_MAXPLAYERS=$SRCDS_MAXPLAYERS"

but, return:
Quote:
###################################################
###################################################
load() : Variable "###################################################" is empty!

cat manage_srcds.conf

I just wish that there was no empty variable excluding those who do not have integer.

Best regards,

I am using phpVirtualBox, and everything is working perfectly. Then something changes, and I get the following error:
Code:

Could not connect to host (http://127.0.0.1:18083/)

I reboot the physical machine, or execute /etc/init.d/vboxweb-service restart, and then everything works for a while.

According to http://sourceforge.net/p/phpvirtualb...onnect-to-host, there are three reasons why this will happen.
Quote:
This indicates that phpVirtualBox could not connect to the vboxwebsrv server. Either the location setting in config.php is wrong, vboxwebsrv is not running on the VirtualBox host, or SELinux is blocking access to vboxwebsrv. If you have SELinux enabled
As shown below, it is not reason 2 or 3.

Code:

[root@devserver ~]# service vboxweb-service status
Checking for VBox Web Service ...running
[root@devserver ~]# service vboxdrv status
VirtualBox kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) are loaded.
[root@devserver ~]# service vboxautostart-service status
Usage: /etc/init.d/vboxautostart-service {start|stop}
[root@devserver ~]# service  vboxballoonctrl-service status
Checking for VBox watchdog service ...not running
[root@devserver ~]# sestatus
SELinux status:                 enabled
SELinuxfs mount:                /selinux
Current mode:                   permissive
Mode from config file:          permissive
Policy version:                 24
Policy from config file:        targeted
[root@devserver ~]#

Thus it must be that the location setting in config.php is wrong. config.php has the following default settings, and I left them as is.

Code:

/* SOAP URL of vboxwebsrv (not phpVirtualBox's URL) */
var $location = 'http://127.0.0.1:18083/';
...
// Host / ip to use for console connections
#var $consoleHost = '192.168.1.40';

According to http://sourceforge.net/p/phpvirtualb...-configuration, "If VirtualBox and phpVirtualBox are on the same physical host, you may leave the $location setting alone". VirtualBox and phpVirtualBox are definitely on the same physical machine.

Please provide recommendations.

hello,

i am trying to make a table from some files. i used this to record how much "RD_" field i have in my file. Quote:
grep -o 'RD_' $f|grep -c 'RD_'
forexample i got 5 "RD_" fields now i want to print 5 number of fields from another file starting from 2nd field. i did it mannully like Quote:
awk 'NR==1{print"{"$2","$3","$4","$5","$6","0.0000",""0.0000""}"","}' $file
i want to make it work together and a bit auto matic like PHP Code:
awk 'NR==1{print"{"$2"to "$5"," apend zeros to make it total 7 fields"}"","}' $file 


your coments would be apreciated
thanks alot