Friends,
I'm completely a Linux newbie, so explain as much as possible.
I installed Linux Deepin on dual boot(practically, triple-boot).
When I select the Linux Deepin option in bootloader, I mostly get a blank screen for a long time.
After practically 2 mins, it presents with some lines of text which I, being a newbie to Linux can't comprehend and hence, cannot counter the error.
The lines go:
"
udevadm settle - timeout of 30 seconds reached, the event queue contains:
/sys/devices/pci0000:00:1d.7/usb1(1080)
/sys/devices/pci0000:00:1d.7/usb1.1-0:1-0(1081)
up waiting for root device. Common reasons for this problem:
root args(cat /proc/cmdline)
Check rootdelay = ...[There's something here I cannot recollect at the moment]
Missing modules(cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/b4b672ea-c6e5-47fe-a174-165ffde63c8 doesn't exist!
Dropped to shell!
"
Then it goes to a Ubuntu shell or something of that sort.
Surprisingly, every-time I boot into Windows and then restart my desktop and then boot to Deepin, it successfully boots in.
I have Deepin installed on external hard disk which is not very fast(just mentioned this if it is of any use.) Also, my Windows is extremely slow in booting up, it takes almost 10 mins, which is why I switched to Deepin, which boots up almost in 2 mins if it does.
Any help would be extremely appreciated.
Hey,
My plan is to run some Linux distro's on an external USB HDD. So far I have been able to instal elementary OS, it thus far boots with the elementary OS logo and hangs for a while when it gives me the following message:
"Gave up waiting for boot device.
- Boot args (cat /proc/cmdline)
- Check root delay (Waiting long enough?)
- Check root (Waiting for the right device?)
- Missing modules (cat /proc/modules; 1s/dev)
ALERT! /dev/disk-uuid/*super long number* does not exist. Dropping to a shell!
BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) build-in shell (ash)
Enter 'help' for a list of build-in commands."
To give you an idea of the external HDD partition:
60 GB: ext4 (elementary OS)
4GB: SWAP
Free Space
80 GB: NTFS (Random files)
The ext4 was given '/' for mounting point to keep it simple for now. The 'boot part' I've set to instal on sdc. Which is the external HDD. (I wasn't sure whether I should have chosen the ext4 partition or not.)
Please let me know if you need any addition information. I hope someone is familiar with the problem or knows a solution.
Thanks in advance.
Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.
Hi Y'all,
Greetings from Snowy NC.
First post with first Linux issue.
Attempting to load Linux .iso distros (both dnlds and commercial (from mags & bought sampler cd pkg online) to see which one I want to go with.
My ACER M3011 desktop athlon 64 x2 w/2GB Mem, dsk =320GB had Vista but I can't restore any longer so I'll go Linux.
After much online research dnlded & installed Zorin Lite w/o issues. However, when attempting to boot 32bit or 64 bit versions of MINT 17.1 or DEEPIN 14.2, recvd NOT ENOUGH MEMORY FOR IMAGE msg. Installed 4 more GB ( the BIOS sees it; total 6). Same NOT ENOUGH MEMORY msg. I have searched all the threads for similar issues w/o finding any. I would appreciate suggestions on where to start.
Thank you, Robert Hall
UPDATE;; After finding suggestions on other forums have tried the trick of adding the mem=1024m, and mem=1G, and mem=4G
during the boot process. Get a whole bunch further into the kernal boot now, but always hangs at the "[7.360454] random:
nonblocking pool is initialized" line.
TIA
RH
Hi,
Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.
Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.
Hello All. This is my first post here. I am worse than a newbie; I'm a PC dinosaur! Not joking either.
Recently got a Dell Inspiron 3048 with Windows 8.1 pre installed. As I am a die hard XP user (my other PC is a Dell Dimension 2400), and seeing that PC's days may be numbered, I want to start using Linux, and decided Mint 17.1 would be first on the list.
Ordered a Linux Mint 17.1 boot disk and went to install it. At the option for a dual boot with Windows, I got lost, and did not understand the "other" choice versus making Linux the only OS on the PC. I wound up wiping my HDD and lost contact with Windows 8.1. Fortunately, the Dell Tech I got at Dell Support was able to walk me through getting Windows back up, but the only way I can now access Mint 17.1 is with the boot disk, but there is no set up options as it is already set up, even though incorrectly for a dual boot.
How do I wipe out Linux without losing Windows 8.1 as well so I can re install Linux and this time make the correct selection for a dual boot?
Anyone willing to respond please do so small and slow so I can follow.
TIA.
BTW, I have tried installing Zorin OS 9 Ultimate on my XP machine via DVD and USB, but I can't get past the f1/f2 loop, even though I have reconfigured my boot sequence according to the drive I'm installing from. Zorin support has been MIA on this. Anyone having a similar problem?
Cheers
I am trying to boot Linux Mint from an 8gb Sandisk USB. I changed my boot settings and it boots into what I believe is called grub? I am given two options, Boot Linux Mint, Boot Linux Mint (compatibility mode). When I select either of them all I get is a black screen. I've tried many things to get around this, messing with my graphics card settings (within grub), different USB's (another 8gb and a 32gb), I tried Ubuntu and that just doesn't boot at all I go straight back to my UEFI settings. I'm very new to Linux and I don't just want to hop in, I just want to boot from my USB whenever I want to play around with it. Thank You
Note: I'm running windows 8.1 currently on a ASUS N550JV laptop. I've been using the UUI from Pen Drive Linux.
Hi Guys, I installed a dual boot config. on a 160 gb hdd. The first choice in grub menu is Linux Lite (latest distro) and the second boot choice is Mint 17.1 Rebecca. I'm encountering a situation that when I boot into LL the system boots OK. Then when I try a restart and boot into Mint it seems to be doing OK until the end of the boot process at which time the screen flashes the Mint logo and then goes dark-then flashes then goes dark every second or so-endlessly. After a while I'm sometimes able to get Mint to finish booting by hitting the esc key. Any ideas how to make this screen flashing situation stop and do a normal boot?
Update: Solved the problem by changing the resolution settings to coincide with those of LL....flashing stopped!
LL and Mint IMHO are two of the best distros for a Newbie to "get their feet wet." - I know, I am that Newbie.
Hi All,
I recently decided to tryout Linux and dual booted my laptop (originally just had windows 8) with Xubuntu. Now I want to try out Kali Linux. So I downloaded Kali and made a bootable USB, the problem is that when I try to boot from the USB it just brings up the grub menu asking me to select Xubuntu, Windows etc. I've changed the boot menu in the BIOS but that has no effect.
I've tried booting into windows and the restarting by holding shift but when I select the usb option it just says:
"system doesn't have any USB boot option. Please select other boot option in Boot Manager Menu"
and then returns to the grub menu. I don't understand because I used a bootable usb to install xubunto?
I'd be really grateful if anyone can help me out with this!
Thanks
Hello everyone,
Recently, I installed Linux Mint 17 (Cinnamon) on my HP dv6 Laptop. During installation Linux was not detecting my original Windows 7 and was attempting to occupy the entire hard disk. So I used the "Something Else" option to manually create separate partitions for Linux (Previously I had allocated around 120 GB free space for Linux using Windows Disk Management). This installed the Linux but after booting it does not detect Windows 7 and directly boots to Mint. I have tried installing and updating the grub but it did not help either.
Please Help...
Hello,
I've just joined the community.
I try to download Deepin but I can't find any alternative mirrors, only the one from official site which dl speed is arround 35kb/s, could any1 provide any links for alternative mirrors?
Thanks in advance