(mv ~/.config ~/.config.org) Ruined My FPS In Games

Just installed unbuntu version 4.3.11(1)-release (x86_64-pc-linux-gnu). Wanted to set up another monitor with an usb vga adapter from j5create. Found this post http://how-to.cc/get-a-displaylink-v...h-ubuntu-12-04. Installed apt-get install xserver-xorg-video-displaylink -> got no green screen on reboot. Created X configuration file...nothing. Looked around some websites were telling me to install: sudo apt-get install xserver-xorg got:

The following packages have unmet dependencies:
unity-control-center : Depends: libcheese-gtk23 (>= 3.4.0) but it is not going to be installed
Depends: libcheese7 (>= 3.0.1) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.

First time I am trying Unbuntu getting already a little frustrated

Hey guys. So I just went out and bought a Sager 8268-s (clevo p150sm-a) With an i7 4910mq and a Nvidia 980m gt. As I am a computer tech by trade, every time i see Windows i get horrible PTSD so i decided to try Linux instead. After many hours of trying to get a dual boot working finally got Linux Mint 17 Cinnamon installed on my computer, but when I went to install the Nvidia driver it landed me in fallback mode which I could not escape. So then I tried Ubuntu 14.04 LTS thinking maybe Mint was incompatible with the driver and the same thing happened.

So here is my method:

(sorry i don't know how to make a code box :/ )

First I log in to get root access:

$ su

Then I Update the xorg:

$ sudo apt-add-repository ppa:xorg-edgers/ppa

Then update my system:

$ sudo apt-get update && sudo apt-get dist-upgrade

Then i go into Virtual terminal (Ctrl+Alt+F1) and disable the display manager:

$ sudo service mdm (or lightdm for Ubuntu) stop

Then i install the drivers which i have done multiple ways:

$ sudo apt-get install nvidia-current nvidia-settings

or

$ sudo apt-get install nvidia-343 nvidia-settings

or by downloading the driver from Nvidia (first designating the file as executable)

$ sudo sh nvidia.run && sudo apt-get install nvidia-settings

Then after install, I create the config file:

$ sudo nvidia-xconfig

Then I reboot. After I get the low res mode in Ubuntu or fallback mode in Mint and Driver manager doesn't detect any proprietary drivers and I have to reinstall to get the OS working again. Any suggestions would be greatly appreciated.

I have a debian OS on a partition on my hard disk (sda1).
There was no sound because the ati rs880/radeon 4200 sound card needed drivers which were only in the debian 'non-free' version'.
So I added the non-free version to my install and also had to make a change to the GRUB bootloader file.
After that, I got sound.

Now I've installed a new debian distro to my second partition - sda2.
This time I ensured I installed the debian non-free version.
But I'm having trouble installing the drivers for the sound card.

I go into Synaptic package manager to install the relevant drivers and it gives me an error message:
Code:

Configuring libfglrx - install Fglrx driver despite unsupported graphics card?

I'm not sure what that means because I want the drivers for my sound card - not graphics.
When I press the 'Help' button, it says:
Code:

This system has a graphics card which is no longer handled by the Fglrx driver...
The above card requires either the non-free legacy Fgrlx driver 
(package fgrlx-legacy-driver) or the free Radeon driver (package xserver-xorg-video-radeon).

This is fine because I can just install the 'free Radeon driver'.

But the Help message then says:
Code:

Before the Radeon driver can be used you must remove Fglrx configuration from xorg.conf 
(and xorg.conf.d/)
Note that switching to the free Radeon driver requires the fglrx-driver package to be purged (not just removed).

So now I don't know what to do. Has anyone had this error message?
I know I can enable sound and have no problems with the graphics card because that's what happened with my original install on sda1.

But with the install on sda2, I don't know how to approach this problem.
Can anyone help please?

Hello everyone im new here and it is my first post, im using slackware 14.1 x64 on an alienware m11xR2 and im havin trouble with Nvidia drivers.

I tried binary and package installations with bumblebee.

Nothing works, GLX doesn't work and after making "nvidia-xconfig" X doesn't start.

I remove the xorg.conf and then X starts but without nvidia and GLX.

Can someone help me ?

Oh, and im french so sorry for my bad english.

So I've got 14.04 installed on a new computer I just built. All new hardware, new install, everything new. I had it all up and running for a few days. I got the nvidia drivers installed, installed steam and was even able to play some games. The last time I had it up it loaded fine, I played 'The Talos Principle', then rebooted to go back to windows. Now when I boot into linux it hangs after the login screen. You can look at my post history as I had this issue before. I was able to fix it that time, but I think it was a different cause.

Some things I've tried to date:
The most common suggestion I've found from googling this issue is to restart lightdm. I've done that to no avail.

I've tried simply entering tty from the frozen screen and then coming back out with Ctrl+Alt+F7. No dice there either.

I've also seen that some people needed to reset their graphics drivers when using nvidia. I tried to do that and I don't think it worked. When I try to purge all nvidia packages it always says "0 upgraded, 0 newly installed, 0 to remove and 16 not upgraded".
Results of dpkg:
Code:

$ dpkg -l nvidia*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait-Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name           Version      Architecture Description
+++-==============-============-============-===================
un  nvidia-common  <none>       <none>       (no description available)
un  nvidia-prime   <none>       <none>       (no description available)

I'm gonna keep googling around in case I find something useful, but I fear I'm treading into water deeper than I know how to swim in and I'm worried that I'll screw something up if I start experimenting. I know just enough about linux to be dangerous. Any advice on what the results of dpkg above mean or suggestions about the problem would be much appreciated.

edit: Forgot to mention that the last time it was working I didn't make any changes to anything. I played a game and rebooted. Suddenly things are broken.

Ten years on Linux and this has me stumped.
So I'm putting it in the Newbie thread.

I pulled an Nvidia card out of my box: I suspected a hardware failure with that.

The gear on the motherboard is Intel. An Intel driver is present, and it seems - judging from the logs - to be loading.

I commented out a lot of xorg.conf. There were things in there to help me get my resolution right.
Gone now, but I purged the Nvidia driver anyway.
( sudo apt-get remove --purge nvidia )

But I have no GUI.
The login screen appears as expected, mouse and keyboard work.
But when I log into the GUI I get only wallpaper, no menus nor bars nor buttons, nor anything on a right-click.

FWIW I had been using Metacity until now, rather than the latest Gnome desktop.

A CD-bootable Ubuntu still works fine in this box tonight: that makes me suppose I have eliminated any hardware problems.

Any tips would be gratefully accepted.

I think I have seen advice suggesting that a person should just delete lots of desktop config files in a situation such as this. But to me that seems wrong - or maybe hasty.

So I thought I'd ask first.

Many thanks for any help.

Hi all,

I'm once more trying my hand at Linux, but it's been so long that I've forgotten everything I learned last time and going back in again as a total newbie.

I tried out SteamOS first, but found it much too clunky for my tastes and, despite being based on Debian, seemed to have had a lot of functionality removed and inability to install some packages even after adding in Debian repos to the sources.list, so I ended up switching to vanilla 64-bit Debian 8 using KDE as my desktop. At first things were going good, managed to install the AMD Graphics Drivers and get Steam itself installed, along with downloading/installing a few games.
I then downloaded a game from gog.com but was getting an error message, which on looking it up appeared to be due to my only having 64-bit libraries for my graphics drivers and no 32-bit ones. I did some more Googling, ran some commands and did some apt-get installs (though sadly I can't recall exactly what they were) and eventually, the game launched fine and all appeared well.

The next time I started up my laptop though, Debian just boots straight to a full screen command line, not the desktop GUI that I want, and I have absolutely no idea how to either switch back to the GUI, or make it the default again. I'm not sure if I've somehow removed KDE, the xserver (I think?), somehow disabled one of them or just changed the startup preferences.
I'd really rather not have to reinstall the whole system again, so any suggestions will be very much appreciated!

These instructions originate from https://www.linkedin.com/pulse/20140...nvidia-drivers, but I modified them slightly for my desktop environment (64-bit HP Envy Phoenix 810-135qe w/Intel i7-4770 and HP ZR2440w monitor, nVidia GeForce GTX645, Red Hat Enterprise Linux 7.1 w/Gnome3).

The following procedures replace the nouveau drivers with kmod-nvidia drivers from ElRepo.

Install the repository ElRepo from: http://elrepo.org/tiki/tiki-index.php

Install the package nvidia-detect from within Applications>SystemTools>Software

From within the terminal, enter the command nvidia-detect.
Example:
[anthony@hp810135qe ~]$ nvidia-detect
Output is...
Probing for supported NVIDIA devices...
[10de:11c4] NVIDIA Corporation GK106 [GeForce GTX 645 OEM]
This device requires the current 346.59 NVIDIA driver kmod-nvidia

For my system the following software packages will apply (yours maybe slightly different, the key is to note the ###.## version identified for your system using nvidia-detect as explained above): kmod-nvidia-346.59-1.el7.elrepo (64-bit), nvidia-x11-drv-32bit-346.59-1.el7.elrepo (64-bit), nvidia-x11-drv-346.59-1.el7.elrepo (64-bit)

Now do the following steps in the sequence indicated:

1. Disable X Windows

a) open a terminal and "su" or "sudo -i"

b) ln -fs /lib/systemd/system/multi-user.target /etc/systemd/system/default.target

Note: Another way to disable X Windows is to do the following from within the Terminal # systemctl set-default multi-user.target

To later change back to booting into graphical mode, substitute 'graphical.target' for 'multi-user.target' in the above commands.

c) reboot

2. Remove Nouveau

a) rpm -e xorg-x11-drivers xorg-x11-drv-nouveau

Note: Another way to remove Nouveau is to do the following from within the Terminal

$ yum remove xorg-x11-drivers xorg-x11-drv-nouveau xorg-x11-glamor

See http://elrepo.org/tiki/kmod-nvidia which discusses that glamor still causes a conflict with nVidia in RHEL 7

3. Blacklist Nouveau

a) edit /etc/modprobe.d/blacklist.conf and add line:

blacklist nouveau

Note: A way to edit this file is by doing the following:

# vi /etc/modprobe.d/blacklist.conf
(use INSERT key to make changes in vi; add the line

blacklist nouveau

Hit Esc key to escape INSERT mode, then hit SHIFT Z Z to save and exit with the changes. Hitting :q ENTER leaves vi without saving changes.

b) edit /etc/default/grub and append to GRUB_CMDLINE_LINUX:

rd.driver.blacklist=nouveau

Note: A way to edit this file is by doing the following:

# vi /etc/default/grub and append to GRUB_CMDLINE_LINUX:
(use INSERT key to make changes in vi; add the line

rd.driver.blacklist=nouveau

Hit Esc key to escape INSERT mode, then hit SHIFT Z Z to save and exit with the changes. Hitting :q ENTER leaves vi without saving changes.

IMPORTANT NOTE IF YOU HAVE AN ENCRYPTED BOOTUP DRIVE -

If you have an encrypted root drive, remove "rhgb" from GRUB_CMDLINE_LINUX. This will allow you to interact with the encryption passphrase prompt, since Plymouth doesn't seem to run without a framebuffer friendly video driver loaded. IF YOU DON'T THIS, WHEN YOU BOOTUP YOU WILL GET STUCK AT A BLINKING CURSOR AND BLACKSCREEN THAT HAS THE FOLLOWING ERROR MESSAGES:


[5.757276] scsi 7:0:0:0: alua: not attached
[5.759625] sd 7:0:0:0: [sdg] no caching made page found
[5.759668] sd 7:0:0:0: [sdg] assuming drive cache: write through

WHEN THIS HAPPENS IT MEANS PLYMOUTH IS NOT ABLE TO SHOW YOU THE PROMPT FOR ENTERING THE PASSPHRASE FOR THE ENCRYPTED DRIVES. WITHOUT THE PROMPT THE SYSTEM CAN'T ACCEPT THE PASSPHRASE AND YOU ARE STUCK. IF THIS HAPPENS TO YOU, YOU CAN DO CTRL-ALT-DELETE TO REBOOT - THIS ALLOWS YOU TO HIT 'e' AT THE KERNEL LINE IN GRUB TERMINAL TO EDIT (MOST LIKELY THE TOP KERNEL) AND THEN REMOVE 'rhgb' (which stands for Red Hat Graphical Bootsplashcreen or something like that). WHEN DONE HIT THE KEYS 'CTRL X' TO REBOOT - YOU'LL THEN SEE TEXT MESSAGES SCROLLING AND GET AN OPPORTUNITY TO ENTER THE PASSPHRASE. ENTER THE PASSPHRASE AND YOU SHOULD BE GOOD TO GO.

4. Reconfigure the grub.cfg files

Two options for booting nowadays are BIOS and EFI

-If you chose BIOS boot run this command:
# grub2-mkconfig -o /boot/grub2/grub.cfg
Note: I also have this one being auto-updated-configured in my system (?why? It's EFI).

-If EFI boot on CentOS:
# grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg

-If EFI boot on RHEL:
# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
Note: Mine is an EFI system. But I did both this and the BIOS grub.cfg above since it too is being updated by RHEL updates concurrently with the EFI grub.cfg

5. Reboot and Install NVidia Driver - I use ElRepo's kmod-nvidia for this step.

Steps by me to install ElRepo's kmod-nvidia (You should still be in Text mode at this time):

If in multi-user.target mode (text, runlevel 3), then do the following
$ su -
enter root password
# yum install kmod-nvidia - version from above
# yum install nvidia-x11-drv-32bit - version from above (this is for 32bit compatibility)
# yum install nvidia-x11-drv - version from above (this is for Open GL X11 display driver and to be done if kmod didn't already include doing it with the kmod-nvidia installation above)
# exit
$

If still in graphics.target mode (you shouldn't be but if you are) (GUI, runlevel 5),
Use Applications > Software > kmod-nvidia - version from above
Install kmod-nvidia - version from above
Install nvidia-x11-drv-32bit - version from above (this is for 32bit compatibility)
Install nvidia-x11-drv - version from above (this is for Open GL X11 display driver)

6. At this point rebuild initramfs. This recreates initrd w/o nouveau. The existing initrd still has the embedded nouveau drivers if this step is not performed) :

Back up the current initramfs keeping nouveau
# mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img
Build the new one without nouveau
# dracut /boot/initramfs-$(uname -r).img $(uname -r)

7. Re-Enable X Windows

# systemctl set-default graphical.target

8. Reboot

If you have an encrypted bootup drive, when you bootup you may notice that Plymouth doesn't look so good with its text in a lower resolution and you'll see lines of text scrolling until you get to a stopped cursor waiting for you to enter the passphrase to unencrypt your drive. Maybe eventually there'll be a solution for this to keep things moving with a graphical bootsplash all throughout. Until then, this is a minor inconvenience for me.

Hey, I'm having a bit trouble getting this working right.

I'm using mate desktop and lightdm
my .xinitrc only contains exec "mate-session"

Xorg file
http://pastebin.com/ipBMwT38

I can login to another X session fine, and start mate desktop with startx. This defeats the purpose of running a seperate X for games though...

steam launches fine from terminal, but my keyboard or mouse doesn't work.

Also in Xorg I enabled coolbits = 24 still can't use NVclock to adjust anything even though it detects my video card details fine.

Hi,
These NVIDIA products are real nightmares. I recently downloaded a copy a sabayon linux for my desktop.
The live dvd booted with the following error message throughout the screen

Quote:
[ 3129.434776] NVRM: No NVIDIA graphics adapter found!
[ 3129.434855] NVRM: NVIDIA init module failed!
[ 3129.479276] NVRM: The NVIDIA GeForce 7025 / nForce 630a GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 340.58 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
[ 3129.479285] NVRM: No NVIDIA graphics adapter found!
[ 3129.479362] NVRM: NVIDIA init module failed!
[ 3129.519879] NVRM: The NVIDIA GeForce 7025 / nForce 630a GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 340.58 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
However after a long time it started up properly. After installing the os I found that the problem still persists. Firtsly it took about 10 mins or so to boot. And then apart from terminal 7 (which is the graphical terminal) all other terminals shows the above output. It seems like it has fallen through an infinite loop. I tried downloading some drivers from the nvidia site but simply could not install them because it mandates the X to stop working. If I do so I won't be able to install it from other terminals.

I have attached the output of "dmesg".
Any help is appreciated.