My System Linux System Crashes Often

hi

I am trying to create a LIVE USB so that I can boot UBUNTU through my LIVE USB and have play around with it and if I like it I would like to deploy it on my netbook.

Here is my story.

I got ACER ASPIRE one net book with Windows 7. 32BIT

1 Installed the Universal USB creator

2 Created the Desktop UBUNTU USB drive by following the options given

3 Booted my system then got this error.

SYSLINUX: No DEFAULT or UI configuration directive found!

Googled this error and found a solution to rename folders.

Did that.

Rebooted and face this error now.

Counld not find kernel image /isolinux/isolinux.cfg.




Can someome please help me on this. Will be very thankful.

I just wanted to post and say how incredibly impressed I am with the whole linux thing! I know you guys have been at this for a while but for someone like me to walk in cold it really is an amazing system. I just ran a full version of Ubuntu studio from my DVD player FROM A FIVE YEAR OLD DELL!!!!!!! It's free, it's incredibly fast and it still hasn't crashed... And I don't know what I'm doing so it really should crash.
I amazed that linux is not the number 1 system in the world. I will make a prediction and say that Linux is going to start to become equally as popular as the big two. It's only a matter of time.

This is not a question. I just want to say to all the programmer guys out there and all the programmers that have contributed to this system..... THANK YOU. you really have changed the world. I'm going to keep going with my exploration and keep asking annoying questions on the forum but I am proud to be a member of the Linux family. Keep it going guys. Brilliant stuff.

I'm running Ubuntu 12.04.5 LTS 64 bit.
Recently, everytime I now run Shotwell (which I got from Ubuntu Software Center), it starts auto-importing photos, then abruptly crashes.

I've used it for a couple years w/no problems like that.

I tried today removing it and reinstalling it with same problem.

I have a Dell Inspiron Mini 1012, which came with a Windows XP operating system. I would like to change to a Linux operating system. Which one would be best for such limited--small capacity--hardware?

Hi. Sorry to be so stupid, but I just managed to load and install this Linux (which I really like a lot) on my previously windows <--(bad) system.
But now I need to upgrade some software (like Adobe flash), and I have no clue how to do this. I understand I should go to my original linux distrubutor, and select software thru them (my "Linux distro").
But actually, it's been awhile since I did the install, and I dont exactly remember where I even got this distribution. (I know, I'm dumb--sorry).
Is there a way I can look at my linux system files and see who my distribution is thru, and where is their website. Or would it be easier if I just went thru the whole download and install of linux again <--(not really looking forward to that).
Or even, am I wrong about going thru the distro to do installs/upgrades?
Anything you can tell me will be greatly appreciated.

Long Live Linux !! David K

Hi, my name is Daniel & I've been considering trying out Linux. A friend of mine says he's got Linux's Ubuntu, & says he really likes it. I've got experience building computers, & Computer Networking. I've got a Desktop w/a free (empty, unformatted) 150 GB Seagate HDD, so I'd like to try using that HDD for a version of Linux. I'm running Win. 7 Ultimate on my primary drive, but I had to install the Win. 7 Ult. 32 bit disc for it to run successfully. I'm considering a dual boot system.

The System I built has an ASUS (A8N-SLI) 64 bit, Socket 939, NVidia N-Force4 Motherboard, w/an AMD, Athlon XP 4000+ 64 bit CPU. I've got 2 ASUS/NVidia G-Force N6800GT PCI Express Graphics Cards, w/256 MB DDR3 RAM each (using my SLI). I've got 2-1 GB 184 pin sticks of Corsair 3200+, 400 Mhz, CL-2 DDR-RAM. I' ve also got a Creative Sound Blaster Audigy 4 Sound System (4.1), w/internal PCI Card & external control box that runs w/Fire Wire. I've also got an Acer 24" Digital monitor, & 1 CD/DVD Burner,& 1 NEC Dual Layer DVD Burner.
I went into detail, just in case my system has something requiring a certain version of Linux. My main problem is, I don't know anything about coding, so I guess I need a version of Linux w/a robust GUI. I thank you in advance for your time & consideration. I look forward to hearing from you. -)

AOA
Good Morning!
first of all Congratulation to run a tremendous site, which help the needy and passionate people. I want to learn that but i cant find a right person.
Actually in our environment, we run Oracle Red-hat Linux 5.9.
I want to become a Linux administrator.
I have following experience of Oracle Red-hat Linux 5.9.

1. Linux Installation 5.9
2. Driver installation
3. IP Installation
4. How to set admin password
5. How to join domain
6. How to set system name
7. How to check system partition drives
8. How to access any specific folder
9. How to install specific software
10. How to off firewall

I would like to request the admin please, i want to do something new in Linux if anyone help me for learning...

My best wishes always with this side and specially for admin. you are really spread a right and useful information...


thanking you,
Best Regards,
Kamran Ali

I am running Antergos Linux 64 bit on virtual box. when I try to do full system upgrade I get a error:

resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: virtualbox-guest-modules: requires linux<4.0


I am using Ubuntu as my host OS and it's kernel version is 3.13.0-49-generic and in Antergos is using 3.19.3-3-ARCH. I guess both are less than linux 4.0

I don't know how to solve this.

Hi guys,

I'm new to the forum and the first problem appeared, hope u guys can help me out!


Just changed my system from Windows to Linux and have some issues to get my Wifi Stick
Fritz! WLAN USB N v 2 working.

1. I downloaded the newest drivers for Win64-Bit from the AVM Homepage.
2. Started ndiswrapper Selected the fwlan64.inf -> Clicked on install.
3. Error Message appears :
modprobe: FATAL: Module ndiswrapper not found
4. Uninstalled ndiswrapper (thought probably and older version could fix this was reading on some Ubuntu Forum cause i couldnt find anything for Ziron)

Any help appreciated!

Thank you so much!

Edit: Some more info

System Log:

Quote:
stani-System-Product-Name kernel: [ 2085.487551] usb 2-1.6: USB disconnect, device number 13
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.452762] usb 2-1.6: new high-speed USB device number 14 using ehci-pci
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.549669] usb 2-1.6: New USB device found, idVendor=057c, idProduct=8501
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.549674] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.549677] usb 2-1.6: Product: FRITZ!WLAN USB Stick N v2
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.549680] usb 2-1.6: Manufacturer: AVM Berlin
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.549682] usb 2-1.6: SerialNumber: 246511430F18
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.624607] usb 2-1.6: reset high-speed USB device number 14 using ehci-pci
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.719007] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.756314] ieee80211 phy4: rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -32
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.756320] ieee80211 phy4: rt2x00lib_probe_dev: Error - Failed to allocate device
Feb 12 16:34:23 stani-System-Product-Name kernel: [ 2086.756349] rt2800usb: probe of 2-1.6:1.0 failed with error -32
Feb 12 16:34:23 stani-System-Product-Name mtp-probe: checking bus 2, device 14: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
Feb 12 16:34:23 stani-System-Product-Name mtp-probe: bus: 2, device: 14 was not an MTP device
Feb 12 16:34:24 stani-System-Product-Name usb_modeswitch: switched to 057c:ffffffff on 002/013
uname -a

Quote:
Linux stani-System-Product-Name 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
stani@stani-System-Product-Name:~$
lsusb
Quote:
Bus 002 Device 006: ID 0b05:179c ASUSTek Computer, Inc.
Bus 002 Device 014: ID 057c:8501 AVM GmbH
Bus 002 Device 004: ID 1ea7:1005
Bus 002 Device 003: ID 046d:c326 Logitech, Inc.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 05e3:0727 Genesys Logic, Inc. microSD Reader/Writer
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Hi,

I am currently working on a Embedded system (linux 2.6.24) and need to set a ftp daemon on it.
I have the busybox v1.4.2 on it but it don't have ftpd on it.
After searching on internet i find tons of way to install a ftp daemon on normal linux computer but no explanation on how to do it on an Embedded devive.
I am not the one who installed the distro and busybox, i have no knowledge on how to make this. I have no sudo/apt-get/make command on my system.