Hi
I'm new at linux, and i'm portuguese, so if there is any incorrection in my text i'm sorry.
So I have this computer, ACER TRAVELMATE 525TX, and I don't know what is the best linux for this computer.
I'd really appreciate if someone could help me out here.
I don't really know how to install it properly, too, so if you could help me with that too it would be awesome.
Thank you
Hi Guys,
Does anybody know if it is possible to install Linux Mint 17.1 on a Acer EEEPC.
My old computer which I am using at the moment and running Linux Mint 17.1 displays the message 'Running in Software Mode without video hardware acceleration'
'There could be a problem with your drivers'.
My old computer is running quite slowly.
I have a option to buy a Acer EEEPC so was wondering if I shouldnt replace my old old computer with the Acer.
Any help appreciated
Hey guys, im a long time Mac user but I want to have a Linux computer in my office for web based stuff and fixing hard drives.... I'm going to buy a used computer from eBay to install my Linux software as I believe that Linux is a lot faster than Mac or windows and doesnt need the latest hardware to compete.
In order to be at least as fast as a windows computer but no more than $100. What range of computer should I be looking at? What specs should I look for? And once I get it should I run Ubuntu or mint for web based things and hard drive repair? As you no doubt know, the Linux lingo is a bit difficult sometimes so please bear with me. I'm doing the best I can.
Weird question I know, but I'm sure you know what I mean.
I get kernel panics and computer shut down when trying to install and run Linux Mint 17 Mate and Linux Mint 17.1 on an older HP laptop. The laptop is a Pavilion dv 5140 with 2.0GHz AMD Turion chip, 2.0 Gigs ram and 120GB hard drive. Linux is the only software installed on the computer. Yet, I think my problem is probably related to the hardware? Does anyone have any suggestions or experience with this situation? Thank you.
Hi, my name is Daniel & I've been considering trying out Linux. A friend of mine says he's got Linux's Ubuntu, & says he really likes it. I've got experience building computers, & Computer Networking. I've got a Desktop w/a free (empty, unformatted) 150 GB Seagate HDD, so I'd like to try using that HDD for a version of Linux. I'm running Win. 7 Ultimate on my primary drive, but I had to install the Win. 7 Ult. 32 bit disc for it to run successfully. I'm considering a dual boot system.
The System I built has an ASUS (A8N-SLI) 64 bit, Socket 939, NVidia N-Force4 Motherboard, w/an AMD, Athlon XP 4000+ 64 bit CPU. I've got 2 ASUS/NVidia G-Force N6800GT PCI Express Graphics Cards, w/256 MB DDR3 RAM each (using my SLI). I've got 2-1 GB 184 pin sticks of Corsair 3200+, 400 Mhz, CL-2 DDR-RAM. I' ve also got a Creative Sound Blaster Audigy 4 Sound System (4.1), w/internal PCI Card & external control box that runs w/Fire Wire. I've also got an Acer 24" Digital monitor, & 1 CD/DVD Burner,& 1 NEC Dual Layer DVD Burner.
I went into detail, just in case my system has something requiring a certain version of Linux. My main problem is, I don't know anything about coding, so I guess I need a version of Linux w/a robust GUI. I thank you in advance for your time & consideration. I look forward to hearing from you. -)
I just bought a refurb computer at the recommendation of a forum member and now I need a manual. Which is the best online ebook to learn Linux for very very beginners! Like ' how to knock the computer on' beginners! A book that doesn't presume I know what a distro is! I'm joining the Linux community and very excited to steep myself in all things Linux but I need to start at the very beginning otherwise I'll end up getting disillusioned by the scale of the Linux dictionary.
Of course I am very Mac competant and not a complete computer unsavvy guy but I believe in order to really know something you have to go back to the basics. Please recommend a basic online books preferably in iBooks.
I look forward to driving you all crazy over the next six months with my ABC questions.
Thanks guys
I downloaded Mint 15 - MATE and made an iso image DVD disk. Then rebooted with DVD in drive. The followinh happened
Splash screen with Linux Mint on
Then Automatic boot in 9, 8, 7 etc secs
Then Linus Mint 15 in Courier with 4 dots underneath
After 2/3 mins screen turned black, covered in white U letters with Welcome to Linux in background
Then wide red and black horizontal bands
Then a more graphic screen with 2 Linux Mint logos on green and white bands, top one a bit fuzzy. Cursor has a red box around it. Icons for Computer, Mint Home and Install Linux mint 'ghosted' with background showing through
Firefox loads, again ghosted, but cannot access internet even though wifi light lit on computer.
Computer is Fujitsu Seimens Amilo L7320 1.7 GHz and 960 RAM
What is going wrong?
Want to try Linux as computer freezes in Windows XP after about 20 mins.
Help appreciated.
Hi folks,
after googling for a couple of days, I get the feeling, this is a common problem. But the usual fix doesn't seem to work for me.
I am trying to install Linux on a separate partition of my Acer Aspire V5-573G. I used the Lili USB Creator to make a bootable USB drive with Ubuntu 12.04 on it.
when I reach the installation menu, it doesn't matter what I choose (start live, install..), my notebook will always freeze on a black screen.
I figured out how to add 'nomodeset' to the grub line. This does bring me one step further (the Ubuntu start screen) but then I get this message:
Code:
ubuntu@ubuntu:^^$ [ 20.267422] mei 0000:00:16.0: init hw failure.
[ 20.267558] mei 0000:00:16.0: initialization failed.
After pressing enter I get a command line. From here I don't know what to do.
I've tried other distros (Lubuntu, Linux Mint), but then even 'nomodeset' didn't make a difference. I have also tried to add 'acpi=off' to the grub line after 'nomodeset', but again only black, even with Ubuntu.
Any suggestion or help will be greatly appreciated!
Since I have not found a solution to my intermittent boot problem I'm thinking of reinstalling Linux Mint, switching to a different Linux distribution, or turning back to the dark side, i.e. Windows. This was my first Linux install and I was really impressed with the OS and the applications. I like Linux Mint but I want a reliable computer and if I cannot even get it to boot properly then that's a long-term concern.
The problem with a reinstall of Linux Mint is that I don't know what to do differently. I don't know what, if anything, I did wrong the first time. Of course, switching to a different distribution is also a crap shoot since I don't know what went wrong with Mint. I don't really want to go back to Windows but it's been a stable, reliable OS for me for years.
Anyone have any advice?
I have an old Pentium 3 all in one computer. This computer will have one dedicated use, which is to watch video streamed over the network from a Slingbox type device. My only requirement is that I can run VLC to play the MPEG2-TS stream. I also want VLC to automatically paly and audio CD when it is placed in the CD drive. Therefore I really don’t require many codecs. My only other requirement is that I will need to load drivers for a wireless remote or something so that I can control VLC.
At the moment the PC does the above with windows XP, but it takes far too long to load. As I only want the computer to perform this one task, what Linux distro would people suggest for the quickest boot? I have so far tried puppy but it still takes a while to load. Does anyone have any suggestions where to go from here?
I am very new to Linux so will need something which is not too hard to setup.
Hello. I am an absolute beginner with Linux and would appreciate a bit of hand holding. I am building a small computer for use with Ham radio applications and have never used Linux before.
I have downloaded a Ubuntu build onto a wintel machine and created a cd. The drive in the PC is a CCD an I have only ever used one on a windows machine and then I didn't install it.
Can someone guide me as to :
1) how I should format or in some other way prepare the SSd for the installation of Linux
2) tell me anything I should be aware of in installing Linux to the SSD
3) anything I should watch out for in using the SSd with Linux.
That last one may seem silly but I have been warned never to defrag on the Wintel machine as it will damage the SSD.
I look forward to any help / advice that you may have.
Best regards
Nick (GW6EWX)