Cannot Add A VPN Connection

Hello,

I'm trying to install Linux computer brand Positive
MS-7267 see 4.5 (945GCM5 v2)
Intel Celeron 420 1.6 GHz
2GB DDR2 memory
80GB HD

I believe he was previously with Windows 7 installed (but the original factory is Vista Starter)

I used the KillDisk for formatting, and overwrite zeros, and apparently it was all OK.

When trying to install Elementary OS (DVD) or Ubuntu (another DVD), appears the keyboard and the doll:

http://imgur.com/0OqZYBv

but later it goes to black screen with a list of errors.
List errors when trying to install Elementary OS:
http://imgur.com/OV8ji6m

List errors when trying to install Ubuntu:
http://imgur.com/4dnmE2O

Too tried the Mageia (DVD)

The following installation screen appears: http://imgur.com/KaAyBeW

I tried to add some parameters both in Mageia as The Elemetary and ubuntu (after pressing F6), as
acpi = off noapic nolapic nodma PNPBIOS nomodeset irqpoll xdriver = vesa resolution = 1024x768 and nothing, changed nothing

In Mageia, when I click install linux kernel appears the load popup and always goes to 100%, but then just goes black screen passes 10, 20 minutes and not change anything

Selecting Mageia hardware detection option appears the information below:

http://imgur.com/4GwHUeE
http://imgur.com/8ZcbS1C
http://imgur.com/mLQrclq
http://imgur.com/qmRZ09J
http://imgur.com/OCCdx6b
http://imgur.com/IYQM4BC
http://imgur.com/gpFF7I0


In the bios setup already disable IOAPIC, checked if the vga is 8mb and TBM does not change anything:
screens is set as:

http://imgur.com/UzLPOT0
http://imgur.com/KY7ksGh
http://imgur.com/SDzWKje

I'm three days trying to install Linux and I can not.

I thank those who can help

Hi,

I have a CentOS 6 machine [Machine X], which I connect to using a putty client or from another CentOS 6 machine.

Now, the machine X intermittently sends a connection reset message to all SSH sessions -

Code:

Read from remote host 1.1.1.1: Connection reset by peer
Connection to 1.1.1.1 closed.

I have switched off the firewall on the machine & there are no session timeout values set.

How do I find out what is causing this issue?


Thanks

Bhushan

Alright, I followed this tutorial http://blog.qnology.com/2014/07/hack...nd-mobile.html To install linux on my Pogoplug v4 but when I restarted it just blinked green forever and nothing happened. I figured the OS did not install onto the flash drive and I was correct. I followed these instructions http://archlinuxarm.org/support/reinstallation and formatted the drive, got the correct Debian linux distro and put it on there, then put the drive back into the Pogoplug.

Success! Green light turned steady and the flash drive light flashed. After a few seconds it settled down but occasionally will access the flash drive (indicated by blinking USB light). Only problem is I cannot SSH into the pogoplug anymore. It has an IP address from the router. The router says its attached. But, when I use Putty to SSH into that address I get “Connection refused”

I know this is simple but I am very new to linux.

Thank you

Hello, I'm having a problem on Kali Linux. I've added some shotcuts to the top panel but it shifts to the left from time to time until I cannot see anything I cant even click on Applications menu because it clicks the shortcut behind it.

Example:

http://i.imgur.com/gV4s3FY.png
http://i.imgur.com/ZelH4Kh.png
http://i.imgur.com/kVJ5ruR.png

It fixes when I log out and log in again. I'm looking for a permanent solution, any help?

Thanks.

Hi ,

I'm new to Linux , I installed Kali linux on my pc and the wifi card isn't working ..

It is a usb wifi card , It has a cd for its driver. There is a folder in the cd called " Linux Driver " and here's what is inside it

First folder :

http://imgur.com/WTNgnEm

Second folder :

http://imgur.com/PyH07Cs

And here it is when I write lsusb :

http://i.imgur.com/NiPbbxSh.jpg

I'd like to know the steps to install it , Thanks in advance ..

The Internet connection icon in the notification area of my desktop panel shows the status of my computer's connection to my LAN and hence to the www – at least, it did from the date of first connection, in late 2013, until about December of 2014. It was infallible. Then, shortly before Christmas last year, router trouble on the LAN meant that no Internet service was available for the best part of a week whilst repairs/replacements were effected. Restoration of the LAN brought all four of my computers back on line (1 Linux Mint and 3 Windows XP) Ostensibly nothing had, nor needed to be, changed, as far as net connection addresses were concerned. The XP computers simply picked up where they had left off some days earlier but the Linux machine returned with a disabled LAN connection icon that has remained in that state ever since. Nothing else is affected, I continue to log on and off as normal and enjoy the same network services as before but nothing will now persuade the connection icon to change its disconnected state. If I right click the icon, and then click 'Connection Information', I get, “No valid active connections found,” which is at complete variance with the facts. I have used the 'Edit Connections' option but can find nothing apparently amiss. Wired Connection 1 appears to have retained its previous settings so the loss of function is a bit of a mystery. Anyone got any ideas?

My web server displayed the following error to the website i log to the web browser.

Details:
Website address: http://exampleweb.com
Warning message: connection failed
Ip address: 182.x.x.x
internet connection status: connected.

Hello everyone from stackexchange,

I am a total Linux newbie, and for a short school task I have to perform the following action in Linux OpenWRT running in my virtualbox. I have tried multiple commands and googled a lot but I can't get it working. If someone could help me out on what to do, that would be awesome. I have looked through the manuals too but it doesnt seem to work.

Task: http://i.imgur.com/MeLcGJh.png

My OpenWRT screen: http://imgur.com/98OLB9Y

Many thanks.

I am new to linux and My distribution is Kubunto. My wireless Icon shows that my connection to my router has been deactivated and will not allow me to connect to internet or give me an option to connect with a password. I cannot find the application in kubunto that walks me through the connection process. Is there such a program and what is its name. Thanks from a newbie

I have installed Linux Mint 17.1 Qiana Cinnamon on to a Compaq Presario R3000 and cannot use the wireless connection. I am totally lost. I can get the wired connection, but the wireless is not there. I have tried to establish the connection, but I do not understand the lingo like BSSID of my router. I have entered the MAC address but do not know how to clone it. Help!