Trying To Install Dual-Boot With AVLinux And Windows XP

Hello all,

I am new to linux but not new to PC's.

I am self taught in everything i know so far.

I have an issue i am looking for some guidance on, i have burned an ISO copy of AVLinux & booted from the Live DVD.

chose to install on partition & created all the necessary file systems etc with GParted then proceeded with the install.

Completed install but when i try to boot no joy.

I have EasyBCD installed on Vista to manage to boot processes.

I am able to get to Grub4dos window & grub> prompt.

I have tried many commands of which i have identifeid the partition is there as correct filesystem, when running the /vmlin....TAB command it locates the name of the linux distro, if i set the drive partition to makeactive it boots up saying no operating system them have to change it back to Vista.

I have two pics that show the grub configuration reading from the live DVD, the install appears to have some missing or not right as opposed to the DVD, can anyone assisst how i can fix this issue?

Do i have to copy each file over manually from the Live DVD's folders?

Cant attach images here so here is the differeneces,

these are the listing on the Grub configuartion being read using the Live DVD,

1. /etc/grub.d
2. /boot/grub/device.map
3. grub-install
4. grub-mkconfig
5. grub-mkdevicemap--device
6. grub-mkfont
7. /boot/grub
8. /boot/grub/grub.cfg
9. /etc/default/grub

Here is what way they are on Live DVD,

1. Present
2. Present
3. Present
4. Present
5. Present
6. Present
7. Present
8. Yellow information bubble
9. Present

My install on partition,

1. Present
2. Yellow information bubble
3. Red X bubble
4. Red X bubble
5. Yellow information bubble
6. Present
7. Yellow information bubble
8. Yellow information bubble
9. Present

what do i need to do to remedy this?

i have attempted the install on couple of different drives, no success.

Hello!

TL;DR: Deleted Linux partition from Windows. Stuck at Grub rescue prompt.

I'm sorry to trouble you guys, because I'm an idiot.

So I'm wanting to dual-boot Kalilinux and Windows 8.
I went through the steps such as creating a bootable USB, changing the
boot order and so on. I get into Kali, start Gparted and try to partition stuff.

I'm far from an expert, so I wasn't sure what to do. Long-story short, I
didn't seem to get Kali installed correctly, due to something with an EFI
drive being required. So I boot into windows and then stupidly, because it said in the guide,try to "uninstall" Kali by removing it's partition, inside Win8 haha... So I did.

Now I simply get the Grub rescue command prompt when I boot from the same
USB and I have no idea how to fix it. I've run bootrec.exe/fixmbr in Windows haha,
for what it's worth. However Grub can't find any partition it says.

In windows, I have like... 2-3 Recovery partitions. Does anyone know how to remove
them??? I've tried to clear as much as I can, besides the C drive and Auxillary D drive.

Any advice would be very appreciated.

I have tried installing a Ubuntu OS onto a partition (sda3).
When I had difficulties with the install, I decided to delete everything from the partition.

But now when I boot the computer, I get taken to the 'grub rescue' prompt.
I have tried to find grub in my other partitions (sda1 and sda2).
However, the command 'ls (hd0,msdos1)/' for example, does not show a grub directory.
It must've transferred grub to sda3 somehow and now I've deleted it.

I have debian live USB and am trying to install grub with:
Code:

apt-get install-grub /dev/sda

But I get the error message:
Code:

bash: grub-install: command not found

So now I don't know what's going on. Can anyone please help?

Hi, yesterday I decided to install Deepin in a dual boot. I later decided I no longer needed/wanted it so I deleted the partition. Apparently I had grub on that partition as well, and now my laptop only goes to grub rescue and will not boot.
I have an acer aspire v5 touch. Removing the hard drive is not an option. I have tried to access UEFI but my computer just beeps and goes to grub rescue. I have grub rescue disk on a flash drive, I used unetbootin to do that, but iI cannot get to any boot menu (f12), and when I use ls (hd0)/ I get a unknown file system error. Please help, and sorry for my grammar/formatting, I'm on mobile.
Tl;dr: Deleted partition containing grub and deepin, now can only get to grub rescue, and I keep getting an unknown file system error, please help.

Hi,

Before installing Linux Mint 17 to the entire HDD of my HP p2 1317cb desktop, it was running a preinstalled windows 8 OEM UEFI. After several failed attempts of dual booting(no grub menu and boots directly to the windows 8) i then decided to do a erase all and install Linux option. Now i have Linux Mint 17.1 working flawlessly, so far. What i want to now do is, dual boot a windows 7 installation alongside my Linux. Please advise on the best way to do this.
Thank You.

Note: Before doing a clean install of Linux i disabled secure boot,enabled legacy, and disabled fast boot.

Hi!

I am running into a problem as stated in the title. I currently run Windows 8.1 on a Asus S300CA notebook. Not too long ago I installed and shortly after uninstalled Ubuntu 14.04 by simply deleting the partitions via Windows and recovering the original Windows Boot by running command prompt: "bootrec.exe /fixmbr" ... which consequently seemed to get rid of the grub loader.

Now I like to install Elementary Luna, but while installing the boot loader an error message pops up saying that the 'grub-efi' package fails to install into /target/.

After some research and not being able to find too much on the subject, I created an extra '/boot/grub/efi' partition of 100MB. Thereby selecting 'sda5' to mount/install the boot loader in that particular directory/partition. This has not worked and produced the same error message.

* Quick start disabled in Windows 8.1
* Running 'Try Elementary Lunar', the wifi hardware is detected but no signals are picked up, nor can I seem to connect to my landlord's router using their SSID (Just in case someone suggests doing something in the terminal requiring an internet connection.)

What to do? Your help is much appreciated.

* Edit: I just realized there is an entire forum dedicated to making Linux run on notebooks, laptops and netbooks. Mods, feel free to move this message.

I have followed all the instructions I have got from the net and made boot-able DVD's and USB sticks several different ways as people advise. I have done the same with Mint 17. I have created a partition (26G) and follow the install instructions 1: English 2:Has at least 7.4G available drive space. 4: Is connected to the internet. 5: Here it shows a page where I think it should display the drive options (but does not) If I push the "install now" button it comes up with an error "No root file system is defined --Please correct this from the partitioning menu" I close the installer and look at the drives in GParted and they are all there and the one I created for Linux is PARTITION - /dev/sda4 FILE SYSTEM - ext4
MOUNT POINT - /media/makulu/0C43086E0C43086E LABEL - Lin
SIZE - 26.02 GB USED - 590.07 Mb UNUSED - 24.44 GB FLAG - (blank)
No indication on how to fix the "No root file system" problem. I have tried so many bits of advise that I am beginning to think that I may be better of sticking to windows (perish the thought)
Can anyone help?
Col

I have a Toshiba Laptop that had a Dual Boot of Windows 7 and Linux Mint 17 on it and both OS's worked fine. I've been wanting to use CentOS 7 as my primary OS so that I can become more familar with RPM management and proceeded to remove my Mint installation and replace it with the CENTOS 7 installation, and the install completed successfully. HOWEVER, here's my problem.....

When my laptop starts up, I don't see GRUB nor do I have any option of selecting whether to run Windows or CentOS. It automatically loads up Centos 7. When I do a 'sudo fdisk -l', I can see that SDA1 is an NTFS drive, and when I try the following 'sudo mount /dev/sda1 /media/Main\ Drive' I get an error message saying that I can't mount an NTFS drive.

Am I missing something or is there a way to access my Windows files from within Centos. I was able to do this with Mint without an issue, but unable to see any of my windows drives because I can't mount an NTFS drive.

I have no problem with keeping CENTOS as my only OS on this laptop, however, I do need to access the files from the Window's partition, and if anyone can help me to access my files, that would be totally awesome.

Thank you in advance for reading through this and for any help offered.....

Mikey

Please Help,

I have a Windows 7 and Fedora 20 dual boot pc .
Today i deleted the fedora partition from windows disk management and then restarted my pc.
Now i am stuck in the 'grub rescue > ' screen ...... It is showing 'no such partition ' , after searching through the internet i tried these commands......

grub rescue > set boot=(hd0,msdos6)

grub rescue> set prefix=(hd0,msdos6)/*boot/grub

grub rescue> insmod normal (after this line ,i am getting the error , grub rescue > unknown filesystem)

grub rescue> normal

Don't know what to do ,but i want to get back to the windows os first ,also i don't have the windows or fedora live cd . My Windows recovery is stored in my pc hard drive....... plzz help so that i can resolve this issue

I have installed linux(mint and ubuntu) on a few laptops, but i have an ASUS eEEE netbook PC..Atom processor...No DVD drive...

I have chosen PUPPY Linux distro, and I have booted from a thumb a few times to make sure everything seems to work....but...when I start trying to install...well...its asking me about using the partition tool to change the types of partitions that are best for linux...

I am not understanding the instructions...as far as what i need to do...has anybody done this install ,,,the current netbook OS is Windows Starter 7. I just want to REPLACE it entirely with linux puppy. I did not encounter this on my laptop installs..i just said yes...replace the current OS..but somehow the netbook install is acting different....do i need to change the partitions or can i just take the defaults...I forge the exact partition extentsions..something line ntfs and it says to change to ext2 and ext3...not sure how to do that...

Can some direct me to the best way to do this? thx.